Home

Supply voltage: 110-250 V AC 50/60 Hz
Maximum load: 10 A
Maximum power: 2,500 W
Overvoltage protection: 1,500 V
Number of 230 V sockets: 5
Protection level: IP22
Cable marking: H05VV-F, 3X1.0 mm2,
sheath 0.2 mm Cable material: PVC
Housing material: ABS
Length: 2.0 [m]:
Switch: Yes, for each socket separately

Supply voltage: 110-250V AC 50/60Hz
Maximum load: 10A
Maximum power: 2500W
Overvoltage protection: 1500V
Number of 230V sockets: 5
Type of sockets: Schuko
Number of USB 5V 2A sockets: 4x USB-A + 1x USB-C
Protection level: IP22
Cable marking: H05VV-F, 3X1.0 mm2, 0.2 mm
Cable sheath material: PVC
Housing material: ABS
Length: 2.0 [m]:
Switch: Yes, for each socket separately

Material: Q235 galvanised steel
Colour: Black (RAL9011)
Total height: 3000 [mm]

Base diameter: Ø114 [mm]
Revision: Yes

Pipe diameter: Ø76 [mm]

End diameter: Ø71 [mm]

Base dimensions: 200 x 200 x 8 [mm]

Kit includes: Concrete fixing pins

1 m extension hose available (index: 2775)

Max. load capacity: 20kg - 3m, 17kg - 4m, 15kg - 5m, 12kg - 6m

Extension for Ø76 lighting column (ref. 1886)

Material: Q235 galvanised steel

Colour : Black

Overall dimensions: Ø76 x 1100 [mm]

Pipe diameter: Ø76 [mm]

Black lacquered aluminium rail

Total dimensions (with accessories): 2,000 x 42 x 20 [ mm]

White lacquered aluminium rail

Total dimensions (with accessories): 2,000 x 42 x 20 [ mm]

Overall dimensions: 78 x 34 x 20.5 [mm]

Connector dimensions after installation: 9 x 34 x 20.5 [mm]

Overall dimensions: 78 x 34 x 20.5 [mm]

Connector dimensions after installation: 9 x 34 x 20.5 [mm]

Total dimensions : 70.55 x 70 .55 x 17 [mm]

Overall dimensions: 70.55 x 70 .55 x 17 [mm]

Spotlight with GU10 socket.

• Bulb not included.

Spotlight with GU10 socket.

• Bulb not included.

Remote control for use with a motion detector, can be fitted to Ufo A Series Industrial High Bay bells if required.

24V DC LED power supply required / controller and remote control not supplied

Calculate your power supply:

The power in W of your power supply is proportional to the length in ml.

Kanlux NEON LED are special LED ribbons available in three colour temperatures: cool white, warm white and neutral white, as well as blue. They are water-resistant (IP65) and exceptionally elastic. They feature uniform illumination along their entire length (no visible light points) and come with a 3-year guarantee. Kanlux NEON LED is a very bright light that can be used successfully not only for domestic or commercial use, but also as advertising NEONs. Their flexibility and elasticity allow them to create virtually unlimited shapes. Each NEON LED strip is 5 metres long and is powered by 24V.

Accessories clip for flexible LED neon light, pack of 20

ATTENTION: bezels for spotlights SPECTRA

CCT by colour temperature selection

• (optional sensor 100861)

• (optional sensor 100861)

The luminaire is sold without a bulb.

The customer's visual perception of the sizes, colours, textures, etc. of our products may be affected by factors such as ambient light, screen calibration, viewing angle or each user's device. The customer must bear in mind that returns made for reasons unrelated to the functioning of the product will be charged to the customer.

The 73884 is replaced by this product

• • Can be cut every 10 cm

    REF: LM2615 MUST BE ADDED FOR A LENGTH (MAX 50ML).

    220V AC direct supply, no rectifier system.

  • Can be welded in the workshop with ref: LM0004

Led ribbon power supply for 230v led ribbon

Compatible with Cobpro and Cobpoint

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.