Availability
Price
Shape
Ampère
Type of products
Brand
Temperature in K or Colour
Power in Watt
Dimmable
Guarantee
Bulb / Holder / Product type
Exterior finish
Power supply
IP protection
Voltage
Type of product 2
DC output voltage
Driver intensity
Colour
Subcategories
There are 269 products.
| Power | Lumens | Voltage | Angle 120° |
|
| 12 W/m | 1400 Lm/m | 170/265 VAC | ||
| IP protection | Colour temperature | |||
| 65 | 3000 K | |||
| Number of leds per ml | Dimensions (L x W x H) | |||
| 110 | 1000 x 14 x 6 mm | |||
| Dimmable | No |
|||
Can be cut every 10 cm
MUST ADD REF: LM2357 FOR A LENGTH (MAX 50ML).
220V AC direct supply, no rectifier system.
Flexible mounting bracket for XL led profile X2
Please note that LED profiles are sold without diffuser, termination and mounting brackets.
Grey termination for 30/60 angle LED profile X2
Led ribbon power supply for 230v led ribbon
Compatible with led ribbon Prostrip & Cobpoint :
LM2611 / LM2612 / LM2613
LM2661 - LM2662 / LM2663 / LM2664
| Power | Lumens | Voltage | Angle 120° |
|
| 10 W/m | 1100 Lm/m | 220 VAC | ||
| IP protection | Colour temperature | |||
| 65 | 2700 K | |||
| Number of leds per ml | Dimensions (L x W x H) | |||
| 110 | 1000 x 10 x 3 mm | |||
| Dimmable | No |
|||
Can be cut every 10 cm
REF: LM2615 MUST BE ADDED FOR A LENGTH (MAX 50ML).
220V AC direct supply, no rectifier system.
Power supply for led ribbon 230v 2835
Compatible with led ribbon Ruzok and Brescia:
LM2341 / LM2342 / LM2343 / LM2344
LM2335 / LM2336 / LM2337
Flexible mounting bracket for X2 LED profile
| Power | Output voltage | |
| 20/40W | 12V AC / 3.34 A | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 65 x 35 x 20 |
|
Dimensions may vary.
Last units on promotionWarning! 3 months warranty, no returns or exchanges.
| Power | Lumens | Voltage | Angle 120° |
|
| 12 W/m | 1400 Lm/m | 220 VAC | ||
| IP protection | Colour temperature | |||
| 67 | 4000 K | |||
| Number of leds per ml | Dimensions (L x W x H) | |||
| 110 | 1000 x 10 x 3 mm | |||
| Dimmable | No |
|||
Can be cut every 10 cm
REF: LM2615 MUST BE ADDED FOR A LENGTH (MAX 50ML).
220V AC direct supply, no rectifier system.
With this kit, we ensure that we solder the wires for you; after fitting protective connectors at both ends of the LED strip, we then test the LED strip.
Please select the length you require when purchasing theBergamo RGBLED strip.
(Don’t forget to order the remote control and the controller (required) to ensure the 220V RGB LED strip works properly).
| Power | Lumens | Voltage | Angle 120° |
|
| 17 W/m | 1680 Lm/m | 220 VAC | ||
| IP protection | Colour temperature | |||
| 65 | 4500 K | |||
| Number of leds per ml | Dimensions (L x W x H) | |||
| 110 | 1000 x 12 x 5 mm | |||
| Dimmable | No |
|||
Can be cut every 10 cm
MUST ADD REF: LM2357 FOR A LENGTH (MAX 20ML).
220V AC direct supply, no rectifier system.
Grey termination for XL flat LED profile X2
Workshop service, we solder the cable to 220 V LED ribbon (1 per length of 220 V LED ribbon).
Soldering may take 2 to 3 days.
| Power | Output voltage | |
| 5W | 5V DC / 1 A | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
Dimensions may vary.
Please note that LED profiles are sold without diffusers, terminations and mounting brackets.
Led ribbon power supply for 230v led ribbon
Compatible with Cobpro and Cobpoint
• 2.4 GHz RF wireless transmission technology
• Adjustable brightness
• Control range: 30 m
Sold individually; remote control not included.
Please note that LED profiles are sold without diffuser, termination and mounting brackets.
| Power | Lumens | Voltage | Angle 120° |
|
| 12 W/m | 1400 Lm/m | 220 VAC | ||
| IP protection | Colour temperature | |||
| 67 | 2700 K | |||
| Number of leds per ml | Dimensions (L x W x H) | |||
| 110 | 1000 x 10 x 3 mm | |||
| Dimmable | No |
|||
Can be cut every 10 cm
REF: LM2615 MUST BE ADDED FOR A LENGTH (MAX 50ML).
220V AC direct supply, no rectifier system.
| Remote control | Batteries | Voltage | Control | |
| 4 zones | 2xAAA | 3V | 30 m | |
| Downloads available : | ||||
| manual | ||||
Sold individually - Batteries not included.
| Power | Lumens | Voltage | angle120° |
|
| 12 W/m | 1,400 lm/m | 170/265 VAC | ||
| IP rating | Colour temperature | |||
| 65 | 4000 K | |||
| Number of LEDs per metre | Dimensions (L x W x H) | |||
| 110 | 1000 x 14 x 6 mm | |||
| Dimmable | No |
|||
Can be cut every 10 cm
YOU MUST ADD REF: LM2357 FOR A LENGTH (MAX 50ML).
Directly powered by 220V AC, without a rectifier system.
Power supply for led ribbon 230v 2835
Compatible with led ribbon Como:
LM2351 / LM2352 / LM2353 / LM2354
• 2.4 GHz RF wireless transmission technology
• Control of products from the MiBoxer/Mi-Light 2.4G series
• Control range: 30 m
• Adjustable brightness and colour temperature
Sold individually – Batteries not included.
| Power | Output voltage | |
| 6W | 12V DC / 0.5 A | |
| Input voltage | IP protection | |
| 110/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 42 x 40 x 20 |
|
Dimensions may vary.
*Stable performance: no flickering after connection, good anti-interference. The casing is made of plastic to protect it from dust and moisture.
*Safety: no transformer noise, insulated end cover. The protective device is equipped with overload protection, overvoltage protection, short-circuit protection and overheating protection.
*Small and flat: with dimensions of 42 x 40 x 20 mm, it is small and can be easily installed in any room without compromising appearance. Inputs and outputs are clearly marked for easy electrical connection.
*Easy connection: simple connections via screw terminals allow easy replacement of existing transformers.
* Wide application: suitable for a variety of low voltage 12 V LED applications, including LED strip lights, doorbells, cabinet lights, LED displays.
Please note that LED profiles are sold without diffusers, terminations and mounting brackets.
Profile adapter: 26561
| Power | Lumens | Voltage | Angle 120° |
|
| 9 W/m | 960 Lm/m | 12 VDC | ||
| IP protection | Colour temperature | |||
| 20 | 4000 K | |||
| Number of LEDs per ml | Dimensions (L x W x H) | |||
| 60 | 5000 x 10 x 1.5 mm | |||
| Dimmable | Yes | |||
12V DC LED power supply required / controller and remote control not supplied
Calculate your power supply:
The power in W of your power supply is proportional to the length in ml.
| Power | Output voltage | |
| 10W | 24V DC / 0.42 A | |
| Input voltage | IP rating | |
| 90/250V 50/60Hz | 67 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 95 x 30 x 20 |
|
Dimensions may vary.
| Power | Output voltage | |
| 15W | 12V DC / 1.25 A | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 90 x 40 x 24 |
|
Dimensions may vary.
Dimensions may vary.
Dimensions may vary.
NOT COMPATIBLE WITH 12V DC LED STRIPS OR LED TAPE
PLACO mounting bracket for X1 led profile
| Total output | Output | Voltage | Control | |
| 15A | 6A/channel | 12-24VDC | 30 m | |
| Downloads available : | ||||
| manual | ||||
Sold individually - Remote control not supplied.
• 2.4 GHz RF wireless transmission technology
• This touch-sensitive dimmer switch can control products from the MiBoxer/Mi-Light series 2.4G.
• Control range: 30 m
• Adjustable brightness
Sold individually – Batteries not included.
Download manual
| Power | Lumens | Voltage | Angle 120° |
|
| 12 W/m | 1560Lm/m | 220 VAC | ||
| IP protection | Colour temperature | |||
| 65 | 3000 K | |||
| Number of leds per ml | Dimensions (L x W x H) | |||
| 110 | 1000 x 12 x 5 mm | |||
| Dimmable | No |
|||
Can be cut every 10 cm
MUST ADD REF: LM2357 FOR A LENGTH (MAX 20ML).
220V AC direct supply, no rectifier system.
