Presence detectors

Kanlux ROLF JQ is a microwave motion sensor. The maximum horizontal operating angle of the sensor is 360 degrees. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Kanlux ROLF JQ is a microwave motion sensor. The maximum horizontal operating angle of the sensor is 360 degrees. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Kanlux ALER JQ is a motion detector that can be effective up to 12 metres away. It is possible to adjust the time delay and operating light intensity.

Kanlux ALER JQ is a motion detector that can be effective up to 12 metres away. It is possible to adjust the time delay and operating light intensity.

This twilight sensor is compatible with luminaires fitted with 1-10V dimmable drivers. Its progressive operating mode increases and decreases the light from the luminaires in relation to the preset light level in the room (it has a dimmer that changes its intensity in relation to the ambient light). As a result, the Photoelectric Sensor / Mini Twilight 1-10V increases the intensity of the luminaires when the ambient light decreases and conversely, if the ambient light increases, the sensor reduces the intensity of the luminaires, thus ensuring that the lighting is always adequate and efficient.

This type of device allows you to maximise the efficiency of the lighting system, as you take advantage of the natural light available at all times. A very interesting option is to combine the Photoelectric Sensor / Mini Twilight 1-10V with a presence detector to fully automate the operation of the luminaire.

This product includes 70 cm of wiring and can be installed either flush-mounted or surface-mounted.

* Compatible with 1-10V dimmable drivers.

A highly sensitive microwave sensor with adjustable parameters (illumination time, activation threshold and detection distance).

Kanlux MERGE JQ is a motion sensor with a maximum motion detection range of 5 m. The maximum horizontal operating angle of the sensor is 360 degrees. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Last units on sale

Attention! product guaranteed 3 months, neither recovered nor exchanged.

The Kanlux MERGE MW sensor offers an aesthetic and practical solution. It has a maximum motion detection range of 9 m. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Last units on sale

Attention! product guaranteed 3 months, neither recovered nor exchanged.

A highly sensitive microwave sensor with adjustable parameters (illumination time, activation threshold and detection distance).

Last units on promotion

Attention! product guaranteed 3 months, neither recovered nor exchanged.

Data sheet here (476.17k)

leaflet (522.59k)

Kanlux SLICK JQ is a motion sensor with a maximum motion detection range of 12 m. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

A highly sensitive microwave sensor with adjustable parameters (illumination time, activation threshold and detection distance).

Data sheet here (415.46k)

leaflet (2.62M)

Kanlux SLICK JQ is a motion sensor with a maximum motion detection range of 12 m. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

With a simple movement of the hand at a distance of 0 to 3.5 cm from the sensor, you can switch any light on or off. It has a power rating of up to 300W, so you can switch a single bulb or several downlights in a corridor on and off. The light will remain on until another hand movement is detected. The sensor's angle of detection is 90º, making it easy to switch on from any position.

This short-range, non-contact sensor switch is a perfect solution for areas with high pedestrian traffic, to prevent the transmission of bacteria and viruses through contact.

Light up your home discreetly with the Short Range Contactless Sensor Switch for Motion Lighting

ALER MINI is an infrared motion detector with an attractive, minimalist design. It has a horizontal detection range of 140° and a vertical range of 45°, and thanks to its tilting mechanism (vertical 45°, horizontal 90°) it can be adapted to suit all your needs. Thanks to its waterproof rating (IP44), this detector can be installed in places exposed to the elements.

Kanlux MERGE JQ is a motion sensor with a maximum motion detection range of 5 m. The maximum horizontal operating angle of the sensor is 360 degrees. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Kanlux MERGE ADJ is an infra-red motion detector which detects over a maximum range of 5m. It also detects 360°. The MERGE ADJ detector's settings are easily accessible and do not need to be dismantled.

Kanlux ROLF JQ is a microwave motion sensor. The maximum horizontal operating angle of the sensor is 360 degrees. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Kanlux ZONA JQ is a motion sensor with a maximum motion detection range of 10 m. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Kanlux ZONA JQ is a motion sensor with a maximum motion detection range of 10 m. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Kanlux ZONA FLAT is an infra-red motion detector which detects over a maximum range of 8m. It also detects 360°. On the ZONA FLAT, you can also adjust the time delay from 10s to 15min, and set the light detection threshold.

Kanlux AS-10 is a twilight detector. It is used to switch on and off the power circuits of the lighting system or other electrical receivers, depending on the level of natural light intensity (day/night).

A highly sensitive microwave sensor with adjustable parameters (illumination time, activation threshold and detection distance).

The Contactless Detection Switch for Cabinet Doors allows any light in a cabinet to be switched on without the need for a wall switch.

Features of the Contactless Detection Switch for Cabinet Doors

The Contactless Detection Switch for Cabinet Doors detects when the door is opened by switching on the light to which it is connected. This light will remain on until the sensor detects that the door is closed, at which point the light will be switched off. The sensor's angle of detection is 90°.

Applications of the Contactless Detection Switch for Cabinet Doors

The Contactless Detection Switch for Cabinet Doors is the perfect solution for illuminating your tool cabinets, wardrobes and kitchen cupboards, making it easier to see and select what you need.

Please note: minimum distance between products 4 m.

Please note: minimum distance between products 4 m.