4X0.25 Mm²

You can use this cable to connect RGB LED strips together. This is ideal when you want to connect several LED strips that are a long way apart to the same controller.

2 x 0.5 mm² cross-section

Cable: 2 x 37 / 0.11 mm

Technical specifications

Inner conductor, OFC material (99.9% oxygen-free copper)

Inner conductor, 0.5 mm² wire cross-section

General

Colour red, black

Diameter 4.4 mm

Sold by the Ml.

The 85x85x45 mm Watertight Junction Box with snap-on lid is perfect for installations in all conditions.

It incorporates 7 cones with a maximum dimension of 25 mm, making connections easy and safe. Manufactured in accordance with UNE-EN 60670-1:2006 and UNE 20324:1993. The 85x85x45 mm Watertight Junction Box with snap-on cover is designed to be practical and durable. It has IP55 protection and its impact resistance index is IK07. It is also fire resistant (glow wire at 650º). Operating temperature: -25ºC (+60ºC).

With the Weatherproof Junction Box 85x85x45 mm with snap-on lid on our DESIGN-LED online site, you can perfectly protect all types of electrical junctions.

2-wire black flat cable 0.75mm sold by the metre

Rolls of 50ml max.

Last units on promotion

Warning! product guaranteed 3 months, neither recovered nor exchanged.

Automatic connector 5 cables 450V 32A pack x5, vision el 7205

• Wire Ø dimensions from 0.2 to 4 mm²

• Dimensions (L x W x H): 20 x 29.5 x 9.5 mm

• Voltage: 32A / 450V max

• IP20 protection

• • • Connector: 5-wire Flexible, rigid, semi-rigid cable

• Packaging: Box of 5

Last units on promotion

Warning! product guaranteed 3 months, neither recovered nor exchanged.

• Dimensions Ø Wires from 0.2 to 4 mm²

• Dimensions (L x W x H): 13 x 18 x 9.5 mm

• Voltage: 32A / 450V max

• IP20 protection

• • • Connector: 2 wires Flexible, rigid, semi-rigid cable

• Packaging: Box of 5

Data sheet here (172.37k)

• Clip-on, screwdriver-free assembly.

• Cross-sectional area: 0.5 to 2.5 mm²

• Dimensions (L x W): 66 x 25 mm

Ceramic GU10 lampholder. Ideal for series mounting.

Sheathed cable. Clips on for screwdriver-free installation.

Cross-sectional area: 0.5 to 2.5 mm²

Dimensions (L x W): 190 x 30.5 mm

Flat Oxygen Electrical Cable Sheath 2X0.5Mm² For Single-Colour Led Ribbons

Sold by the ml

The E14 thermoplastic lampholder kit with double ring nut is used to assemble a wall, table or ceiling lamp with shade.
Compared with bakelite, thermoplastics have a matt finish and are very light.

The E14 thermoplastic lampholder kit with double ring nut for lampshade is made for you:
- you intend to use a shielding element
- you need to use a bulb with an E14 socket
- you want a simple socket at a smart price.

To configure and complete the E14 threaded thermoplastic lampholder kit for lampshades:
- use the menus to define their characteristics
- complete your lighting installation with components, accessories, bulbs and textile cables.

Warning! Cable clamp NOT included.

• Dimensions:
• Height (mm): 80
• Width (mm) : 66
• Length (mm) : 45

The E14 thermoplastic lampholder kit with double ring nut is used to assemble a wall, table or ceiling lamp with shade.
Compared with bakelite, thermoplastics have a matt finish and are very light.

The E14 thermoplastic lampholder kit with double ring nut for lampshade is made for you:
- you intend to use a shielding element
- you need to use a bulb with an E14 socket
- you want a simple socket at a smart price.

To configure and complete the E14 threaded thermoplastic lampholder kit for lampshades:
- use the menus to define their characteristics
- complete your lighting installation with components, accessories, bulbs and textile cables.

Warning! Cable clamp NOT included.

The Bakelite E14 lampholder kit is used to assemble a wall, table or ceiling lamp.
Bakelite is a thermosetting resin named after its inventor and immediately evokes the telephones, radios and everyday objects of the 1950s and 1960s. It's light, durable and, when painted, very shiny!

The Bakelite E14 lampholder kit is for you if:
- you need to use a bulb with an E14 lampholder
- you like the brilliant colour of bakelite
- you want a simple lampholder that highlights your bulb and leaves it visible.

To configure and complete the Bakelite E14 lampholder kit:
- use the menus to define their characteristics
- complete your lighting installation with components, accessories, bulbs and textile cables.

Warning! Cable clamp NOT included.

Kanlux ROLF JQ is a microwave motion sensor. The maximum horizontal operating angle of the sensor is 360 degrees. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

The E27 thermoplastic lampholder kit with double ring nut is used to assemble a wall, table or ceiling lamp with shade.
Compared to bakelite, thermoplastics have a matt finish and are very light.

The E27 thermoplastic lampholder kit with double ring nut for lampshade is made for you if:
- you intend to use a shielding element
- you want a simple lamp holder at a smart price.

To configure and complete the E27 thermoplastic lampholder kit with double ring nut for lampshade :
- use the menus to define their characteristics
- complete your lighting installation with components, accessories, bulbs and textile cables.

Please note! Cable clamp NOT included.

Kanlux ROLF JQ is a microwave motion sensor. The maximum horizontal operating angle of the sensor is 360 degrees. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

This switch is ideal for making your own textile cords for floor lamps.

This switch is ideal for making your own textile cords for floor lamps.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Waterproof T-shape connector IP68 250V Black 3-wire, miidex 7211

• Ø 3G 1.5 mm² dimensions

• Dimensions ( Ø x L x W): Ø20 x 98 x 64.5 mm

• Voltage: 16A / 250V max

• IP68 protection

  • • Connector: 3-wire Flexible, rigid, semi-rigid cable

• Fitting: E27

• Dimensions (Ø x H): Ø 44 x 47 mm

• Dimensions:
• Width (mm): 19
• Length (mm) : 20000

Make your rosettes and sockets even more elegant by using the metal cable clamp with cylindrical stud.

With threaded tube, nut and washer, it fits any socket or rosette.

This pack includes 2 pieces.

This switch is ideal for making your own textile cords for table lamps.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms AC mains current into DC current to light up the LED chips.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Make your rosettes and sockets even more elegant by using the metal cable clamp with cylindrical stud.

With threaded tube, nut and washer, it fits any socket or rosette.

This pack includes 2 pieces.

This switch is ideal for making your own textile cords for table lamps.

The universal cable grommet is essential for fixing textile electrical cables to walls or ceilings.

This small accessory allows you to create the most suitable or fun and creative design with the colours of our cables. Choose the finish that best matches the style of your interior: for a hidden effect, choose the transparent finish!

Suitable for cables with a cross-section of up to 7 mm, this textile grommet is perfectly compatible with all our textile lighting cables.

This pack includes 2 pieces.

Download assembly instructions (176.41k)

• Dimensions (L x W): 130 x 17 mm

• Compatible with: GU5.3 and GU4 -12V

This plug is ideal for creating textile cords for table lamps or for linking lamps to the socket.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

The Bakelite E14 lampholder kit is used to assemble a wall, table or ceiling lamp.

Bakelite is a thermosetting resin named after its inventor and immediately evokes the telephones, radios and everyday objects of the 1950s and 1960s. It's light, durable and, when painted, very shiny!

The Bakelite E14 socket kit is for you if :

- you need to use a bulb with an E14 socket

- you like the brilliant colour of Bakelite

- you want a simple socket that highlights your bulb and leaves it visible.

To configure and complete the Bakelite E14 socket kit:

- use the menus to define their characteristics

- complete your lighting installation with components, accessories, bulbs and textile cables.

Warning! Cable clamp NOT included.

• Fitting: E27

• Dimensions (Ø x H): Ø 27 x 52 mm

• Specifications: Adapter to B22

The 113x113x60 mm Watertight Junction Box lets you make connections and junctions both indoors and outdoors.

This box incorporates 7 cones of up to 25mm for routing cabling. It has been manufactured in accordance with standards UNE-EN 60670-1:2006 and UNE 20324:1993. The 113x113x60 mm Watertight Junction Box has a ¼ turn screw closure with a hermetic lid. It is designed to be practical and durable. With IP55 protection and its shock resistance rating is IK07. It is also fire resistant (glow wire at 650º). Operating temperature : -25ºC (+60ºC).

With the Weatherproof Junction Box 85x85x45 mm with snap-on lid on our DESIGN-LED online site, you can perfectly protect all types of electrical junction.

The E27 bakelite lampholder kit is used to assemble a wall, table or ceiling lamp.

Bakelite is a thermosetting resin, named after its inventor, and immediately evokes the telephones, radios and everyday objects of the 1950s and 1960s. It's light, durable and, when painted, very shiny!

The E27 bakelite socket kit is for you if :

- you like the brilliant colour of bakelite

- you want a simple lamp holder that shows off your bulb and leaves it visible.

To configure and complete the E27 bakelite lampholder kit:

- use the menus to define their characteristics

- find out how to fit the lampholder using the special tutorial

- complete your lighting installation with components, accessories, bulbs and textile cables.

Warning! Cable clamp NOT included.

• Fitting: E14

• Dimensions (Ø x H): Ø 33 x 43 mm

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

• Dimensions:
• Width (mm): 19
• Length (mm) : 20000

• Dimensions:
• Width (mm): 19
• Length (mm) : 20000

Automatic waterproof connector IP68 250V 16A Black 3 wires M/F, miidex 7213

• Dimensions Ø Wires from 0.5 to 2.5 mm² (0.5 to 2.5 mm²)

• Dimensions ( Ø x L): Ø29 x 109 mm

• Voltage: 16A / 250V max

• IP68 protection

  • • Connector: 3 wires Flexible, rigid, semi-rigid cable

• Dimensions:
• Height (mm): 200
• Width (mm) : 112
• Length (mm): 112
• Number of modules: 4

DB series switching devices, which meet the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, solid walls made of non-combustible materials). They may not be used on flammable surfaces (e.g. plasterboard, wood, etc.), hollow walls or electrical conduits.

• Dimensions:
• Width (mm): 19
• Length (mm) : 20000

• Dimensions:
• Width (mm): 19
• Length (mm) : 20000