Electrical accessories & LED drivers

• Dimensions:
• Height (mm): 220
• Width (mm) : 102
• Length (mm): 210
• Number of modules: 6

KDB series switchgear, which meets the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, solid walls made of non-combustible materials). They may not be used on flammable surfaces (e.g. plasterboard, wood, etc.), hollow walls or electrical conduits.

• Dimensions Ø 0.75 to 2.5 mm² wires

• Dimensions ( Ø x L): Ø26 x 82 mm

• Voltage: 16A / 250V max

• IP68 protection

  • • Connector: 3-wire Flexible, rigid, semi-rigid cable
      

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

This twilight sensor is compatible with luminaires fitted with 1-10V dimmable drivers. Its progressive operating mode increases and decreases the light from the luminaires in relation to the preset light level in the room (it has a dimmer that changes its intensity in relation to the ambient light). As a result, the Photoelectric Sensor / Mini Twilight 1-10V increases the intensity of the luminaires when the ambient light decreases and conversely, if the ambient light increases, the sensor reduces the intensity of the luminaires, thus ensuring that the lighting is always adequate and efficient.

This type of device allows you to maximise the efficiency of the lighting system, as you take advantage of the natural light available at all times. A very interesting option is to combine the Photoelectric Sensor / Mini Twilight 1-10V with a presence detector to fully automate the operation of the luminaire.

This product includes 70 cm of wiring and can be installed either flush-mounted or surface-mounted.

* Compatible with 1-10V dimmable drivers.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

• Dimensions:
• Width (mm): 19
• Length (mm) : 20000

This 92x92x42mm Universal Surface-Mounted Box allows you to install flush-mounted switchgear without drilling holes in the wall.

Made from halogen-free polycarbonate (PC), this universal box is highly resistant and has pre-cut entrances for tubes, cables and trunking. Thanks to its dimensions, you can install standard-sized switchgear, so it's compatible with the majority of flush-mounted switchgear series on the market.

The 92x92x42 mm Universal Surface-mounted Box for Apparatus is generally used for indoor installations, normally exposed, of shielded tubes or trunking. A product that will certainly fulfil its purpose and allow you to add sockets or switches to any surface, for example.

* Fixing screws included.

The Textile Electrical Cable is an electrical sheath with a cross-section of 1.5mm² made up of three pure copper multi-core cables with a diameter of 0.75mm² each, making it ideal for lighting installations. It has a textile coating available in different colours.

Combine it with the sockets, suspension cables and finials in the DIY collection. Decorate your rooms and create your own personalised lamps!

* Cable diameter: 6mm.

* Product made to your specifications, and therefore exempt from the right of withdrawal.

The Natural Textile Electrical Cable is the perfect cable to give a touch of personality to the lamp or socket of your choice.

The cable consists of a 20 mm² sheath covered with a hemp fabric. The sheath consists of two copper wires, each with a cross-section of 0.75 mm².

Its use is limited to indoor spaces. It can be connected in any room of the house or premises as it is manufactured to withstand voltages of between 220 and 240V AC and to operate in ambient temperatures of between -10ºC and 50ºC approx.

* Cable diameter: 8mm.

* Product manufactured to your specifications, and therefore exempt from the right of withdrawal.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains AC current into DC so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms AC mains current into DC current to light up the LED chips.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

A highly sensitive microwave sensor with adjustable parameters (illumination time, activation threshold and detection distance).

Supply voltage: 220-240V AC 50/60Hz
Number of sockets: 4
Maximum load: 13A
Maximum power: 3000W
Overvoltage protection: 1500V
Protection level: IP20
Cable marking: H05VV-F, 3X1.5mm2, 0.2mm
Cable sheath material: PVC
Length: 5.0 [m]

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Last units on promotion

• Warning! product guaranteed 3 months, neither recovered nor exchanged.

• Dimensions (L x W x H): 3.6 x 100 x 1 mm

Data sheet here (170.71k)

• Dimensions:
• Height (mm): 160
• Width (mm) : 65
• Length (mm): 160
• Number of modules: 8

DB series switching devices, which meet the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, solid walls made of non-combustible materials). They may not be used on flammable surfaces (e.g. plasterboard, wood, etc.), hollow walls or electrical conduits.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms AC mains current into DC current to light up the LED chips.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Make your rosettes and sockets even more elegant by using the plastic cable clamp with cylindrical stud.

With a threaded tube, nut and washer, it fits any lampholder or rosette.

Choose the finish that best suits the made-to-measure lamp you want to assemble!

The Double-Sided LED Emergency Lighting Sign is a practical and effective way of indicating exits, directions or the location of toilets, etc...

Fitted with a 3.6V 800mAh Ni-Cd battery with a life of up to 3 hours. The LED Emergency Signage Kit has an LED light bracket that offers great energy savings and excellent performance. The lighting on this LED Emergency Lighting Sign allows you to use both sides of the sign independently thanks to the LED light distribution of the design.

Its innovative design makes for easy installation, with 4 types of installation possible: hanging, recessed, wall-mounted in side mode and wall-mounted in front mode. You can choose the signage (exit, right orientation, left orientation, up orientation, down orientation and WC).

Without a doubt, theLED Emergency Lighting Sign we offer on our online lighting site is a key element of any emergency lighting system.

* Permanent lighting.

• Fitting: GU10

• Dimensions (Ø x H): Ø 34.5 x 57 mm

• Characteristics: Adapter to E27

The Natural Textile Electrical Cable is the perfect cable to give a touch of personality to the lamp or socket of your choice.

The cable consists of a 20 mm² sheath covered with a hemp fabric. The sheath consists of two copper wires, each with a cross-section of 0.75 mm².

Its use is limited to indoor spaces. It can be connected in any room of the house or premises as it is manufactured to withstand voltages of between 220 and 240V AC and to operate in ambient temperatures of between -10ºC and 50ºC approx.

* Cable diameter: 8mm.

* Product manufactured to your specifications, and therefore exempt from the right of withdrawal.

A dimmable LED bulb requires a carefully designed dimmer.

Connecting an LED bulb to a traditional dimmer often results in irregular operation, flickering light and a high risk of burning out the bulb.

Our button dimmer, on the other hand, has been designed for all types of bulb: traditional filament, energy-saving, dimmable and dimmable LED.

Designed and produced 100% in Italy, the LED dimmer with knob will allow you to regulate the intensity of light more comfortably and safely.

Download installation instructions (412.04k)

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

• Wire Ø dimensions from 0.2 to 4 mm²

• Dimensions (L x W x H): 13 x 18 x 9.5 mm

• Voltage: 32A / 450V max

• IP20 protection

• • • Connector: 2 wires Flexible, rigid, semi-rigid cable

• Packaging: Box of 50

• Wire Ø dimensions from 0.2 to 4 mm²

• Dimensions (L x W x H): 20 x 29.5 x 9.5 mm

• Voltage: 32A / 450V max

• IP20 protection

  • • Connector: 5-wire Flexible, rigid, semi-rigid cable

• Packaging: Box of 25

• Dimensions Ø 0.5 to 2.5 mm² wires

• Dimensions (L x W x H): 17.5 x 24 x 8 mm

• Voltage: 24A / 250V max

• IP20 protection

• • • Connector: 5 rigid wires

• Packaging: Box of 50

Kanlux MERGE JQ is a motion sensor with a maximum motion detection range of 5 m. The maximum horizontal operating angle of the sensor is 360 degrees. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Last units on sale

Attention! product guaranteed 3 months, neither recovered nor exchanged.

The Kanlux MERGE MW sensor offers an aesthetic and practical solution. It has a maximum motion detection range of 9 m. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Last units on sale

Attention! product guaranteed 3 months, neither recovered nor exchanged.

• Last units on promotion

  Attention! product guaranteed 3 months, neither recovered nor exchanged.

Last units on promotion

• Warning! product guaranteed 3 months, neither recovered nor exchanged.

• Dimensions (L x W x H): 9x180x1,9 mm

• Last units on promotion

  Warning! product guaranteed 3 months, neither recovered nor exchanged.

• Dimensions (L x W x H): 22 x 15 x 9.5 mm

The E27 thermoplastic lampholder kit with double ring nut is used to assemble a wall, table or ceiling lamp with shade.
Compared to bakelite, thermoplastics have a matt finish and are very light.

The E27 thermoplastic lampholder kit with double ring nut for lampshade is made for you if:
- you intend to use a shielding element
- you want a simple lamp holder at a smart price.

To configure and complete the E27 thermoplastic lampholder kit with double ring nut for lampshade :
- use the menus to define their characteristics
- complete your lighting installation with components, accessories, bulbs and textile cables.

Please note! Cable clamp NOT included.

• Dimensions:
• Height (mm): 200
• Width (mm) : 95
• Length (mm): 147
• Number of modules: 6

DB series switching devices, which meet the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, solid walls made of non-combustible materials). They may not be used on flammable surfaces (e.g. plasterboard, wood, etc.), hollow walls or electrical conduits.

• Dimensions:
• Height (mm): 204
• Width (mm): 102
• Length (mm): 194
• Number of modules: 6

Series KDB switchgear, which meets the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, solid walls made of non-combustible materials). They may not be used on flammable surfaces (e.g. plasterboard, wood, etc.), hollow walls or electrical conduits.

• Finish: White
• Dimensions (Ø x H): Ø 100 x 18 mm

• Last units on sale

  Warning! product guaranteed 3 months, neither recovered nor exchanged.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms AC mains current into DC current to light up the LED chips.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms AC mains current into DC current to light up the LED chips.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

The 3-hole metal rose kit can be used to assemble a wall or ceiling lamp with three light sources.
Metal is a durable material and can be placed in a wide range of environments, whatever their style: whether minimal, Scandinavian, industrial or classic, you'll find the metal finish to suit you!

• Finish: Black

• Dimensions (Ø x H): Ø 120 x 10 mm

• Dimensions:
• Width (mm): 19
• Length (mm) : 20000

• Base: B22

• Dimensions (Ø x H): Ø 36 x 61 mm

• Characteristics: Adapter to E27

• Base: B22

• Dimensions (Ø x H): Ø 29 x 43 mm

• Specifications: Adapter to E14

The Textile Electrical Cable is an electrical sheath with a cross-section of 1.5mm² made up of three pure copper multi-core cables with a diameter of 0.75mm² each, making it ideal for lighting installations. It has a textile coating available in different colours.

Combine it with the sockets, suspension cables and finials in the DIY collection. Decorate your rooms and create your own personalised lamps!

* Cable diameter: 6mm.

* Product made to your specifications, and therefore exempt from the right of withdrawal.

• Voltage: 220-240V AC
• Maximum power: 150 W
• IP protection: IP20
• Width: 85 mm
• Height: 80 mm
• Material: PCB