Electrical accessories & LED drivers

The 1-hole metal rose kit is used to assemble a wall or ceiling light with a single light source. Metal is a durable material that can be placed in a wide range of environments, whatever their style: whether minimal, Scandinavian, industrial or classic, you'll find the metal finish that's right for you!

• Finish: Black
• Dimensions (Ø x H): Ø 120 x 10 mm

• Electric cable diameter from 9 to 12 mm

• Dimensions ( L x W x H): 132 x 106 x 37 mm

• Voltage: 16A / 450V max

• IP68 protection

  • • Connector: 3-wire Flexible, rigid, semi-rigid cable

Kanlux ALER JQ is a motion detector that can be effective up to 12 metres away. It is possible to adjust the time delay and operating light intensity.

• Finish: brushed
• Dimensions (Ø x H): Ø 100 x 18 mm

• Last units on sale

  Please note: product guaranteed for 3 months, no returns or exchanges.

• Finish: brushed brass
• Dimensions (Ø x H): Ø 100 x 18 mm

• Last units on sale

  Attention! product guaranteed 3 months, neither recovered nor exchanged.

• Finish: brass
• Dimensions (Ø x H): Ø 100 x 18 mm

• Last units on promotion

  Attention! product guaranteed 3 months, neither recovered nor exchanged.

Dimensions Ø 0.5 to 2.5 mm² wires

Dimensions (L x W): 152 x 152 mm

Voltage: 16A / 250V max

IP68 protection

Connector: 3 wires Flexible, rigid, semi-rigid cable

LED kitchen cupboard door hinge

Dimensions: 70x40x20H mm

2-pole thermoplastic Italian plug for connection to socket-outlet, supplied with insulating cable clamp with screw. Axial cable outlet. Suitable for domestic use.

2-pole thermoplastic Italian plug for connection to socket-outlet, supplied with insulating cable clamp with screw. Axial cable outlet. Suitable for domestic use.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Kanlux ALER JQ is a motion detector that can be effective up to 12 metres away. It is possible to adjust the time delay and operating light intensity.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Base: E40

• Dimensions (Ø x H): Ø 44 x 50 mm

• Characteristics: Adapter to E27

• Finish: chrome
• Dimensions (Ø x H): Ø 100 x 18 mm

• Last units on promotion

  Please note: product guaranteed for 3 months, no returns or exchanges.

Base: G9

• Dimensions (Ø x H): Ø 24 x 22 mm

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

The Kanlux ADI electronic power supply unit, with a maximum permissible case temperature of 75°C and current stabilisation of 350mA DC, is equipped with short-circuit and overload protection, as well as thermal protection that shuts down the power supply unit once the temperature exceeds 110°C.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

This plug is ideal for creating textile cords for table lamps or for linking lamps to the socket.

The E27 bakelite lampholder kit is used to assemble a wall, table or ceiling lamp.

Bakelite is a thermosetting resin, named after its inventor, and immediately evokes the telephones, radios and everyday objects of the 1950s and 1960s. It's light, durable and, when painted, very shiny!

The E27 bakelite socket kit is for you if :

- you like the brilliant colour of bakelite

- you want a simple lamp holder that shows off your bulb and leaves it visible.

To configure and complete the E27 bakelite lampholder kit:

- use the menus to define their characteristics

- find out how to fit the lampholder using the special tutorial

- complete your lighting installation with components, accessories, bulbs and textile cables.

Warning! Cable clamp NOT included.

The 1-hole metal rose kit is used to assemble a wall or ceiling lamp with a single light source. Metal is a durable material that can be placed in a wide range of environments, whatever their style: whether minimal, Scandinavian, industrial or classic, you'll find the metal finish that's right for you!

• Finish: White
• Dimensions (Ø x H): Ø 120 x 10 mm

• Fitting: E27

• Dimensions (Ø x H): Ø 39 x 62 mm

• Specifications: Adapter to E40

• Last units on sale

  Attention! product guaranteed 3 months, neither recovered nor exchanged.

This black plastic Schuko plug can be used to create lamps with cables for outdoors, without any need to modify your installation or carry out wall-mounted installations: so you can light up your outdoor spaces in just a few simple steps!

The IP44 rating of this plug protects it from splashes and sprays. To make connecting and disconnecting the plug easier and safer, it comes with an extractor ring, which can also be used as an overhead suspension hook.

Dimensions Ø 0.5 to 2.5 mm² wires

Dimensions (L x W): 151 x 91 mm

Voltage: 16A / 250V max

IP68 protection

Connector: 3 wires Flexible, rigid, semi-rigid cable

Book, dispatch from 07/07/2025

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

• Dimensions: Ø54.5 x 21.5 mm
• Voltage: 220/240V AC
• IP protection: 20

Kanlux DimGO is a dimmer suitable for LED light sources. It can be used to control the luminous flux of LED light sources. The prerequisite for using the Kanlux DimGO is a power supply suitable for the "trailing/leadership edge" control method.

Last units on special offer

Warning! product guaranteed 3 months, no refund or exchange.

Make your rosettes and sockets even more elegant by using the plastic cable clamp with cylindrical stud.

With a threaded tube, nut and washer, it fits any lampholder or rosette.

Choose the finish that best suits the made-to-measure lamp you want to assemble!

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Quick connector with 3 inputs and 3 outputs Up to 2.5 m², pack of 10, dla LM9055

• Wire Ø dimensions from 0.5 to 2.5 mm²

• Dimensions (L x W x H): 39 x 18 x 14 mm

  • Voltage: 24A / 250V max

  • IP20 protection

    • Connector: 3 wires rigid or flexible

  • Packaging: Box of 10

• Fitting: E14

• Dimensions (Ø x H): Ø 34.2 x 53 mm

• Characteristics: Adapter to GU10

• Fitting: E14

• Dimensions (Ø x H): Ø 39 x 64 mm

• Characteristics: Adapter to E27

• Dimensions (Ø x H): Ø 107 x 35 mm
• IP protection: 20
• Includes: Battery + Screw and dowel kit
• In stock - From 12/11/2025 - Separately

Textile Electrical Cable Black 3X075M² 3ml, dla 132672

The Textile Electrical Cable is an electrical sheath with a cross-section of 1.5mm² made up of three pure copper multi-core cables with a diameter of 0.75mm² each, making it ideal for lighting installations. It has a textile coating available in different colours.

Combine it with the sockets, suspension cables and finials in the DIY collection. Decorate your rooms and create your own personalised lamps!

* Cable diameter: 6mm.

* Product made to your specifications, and therefore exempt from the right of withdrawal.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

• Electric cable diameter from 9 to 12 mm

• Dimensions ( L x W x H): 135 x 57 x 37 mm

• Voltage: 16A / 450V max

• IP68 protection

  • • Connector: 3-wire Flexible, rigid, semi-rigid cable

Last units on promotion

• Warning! product guaranteed 3 months, neither recovered nor exchanged.

• Dimensions (L x W x H): 2.5 x 100 x 1 mm

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Sometimes small ideas make all the difference: this is the case with the Schuko socket with pull-out ring, which makes it easier and safer to connect and disconnect the single-plug socket.
What's more, the Schuko Comfort socket can be fitted and removed with just one screw, simplifying wiring operations.