Availability
Price
Shape
Angle
Detection zone
Ampère
Brand
Base
Power in Watt
Dimmable
Guarantee
Bulb / Holder / Product type
Exterior finish
IP protection
Voltage
Dimensions
Length cm
Type of product 2
Detector
DC output voltage
Driver intensity
Colour
Discover our wide range of electrical accessories for LEDs, designed to optimise and customise your lighting installations. Whether you need transformers for a stable power supply, controllers to adjust colours and light levels, or mounting brackets for a secure installation, we have everything you need.
Browse our selection and find the ideal solutions for your LED lighting projects.
Subcategories
There are 231 products.
The 3W LED Emergency Beacon has a highly waterproof casing and an IP65 protection rating, making it highly resistant to the elements, so it can be installed both indoors and outdoors. It has protective fuses and a battery with a runtime of up to 3 hours. Its integrated LEDs provide high efficiency, durability and excellent performance.
The LED Emergency Beacon provides both permanent and non-permanent lighting. This emergency light is pre-configured as a non-permanent light. By changing the position of the PCB connector, you can select the permanent operating mode.
The 3W LED Emergency Beacon is the most practical, economical and simple solution in the event of a power failure. It is easy to install on both walls and ceilings. It can also be surface-mounted, thanks to the part it incorporates that adapts to the luminaire.
* LED operating indicator.
* For the emergency lighting to work properly, you need to connect the battery pre-wiring.
| Detector | Detection distance | |
| I.R + Twilight | 9 m | |
| Adjustable detector | Angle opening | |
| Yes | 360° | |
| Drilling diameter | Dimensions | |
| Projection | (W x H): 76 x 110 mm | |
| IP protection | Voltage | |
| 54 | 220/240V AC |
|
| Detector | Detection distance | |
| IR + Twilight | 6 m | |
| Adjustable detector | Angle opening | |
| Yes | 360° | |
| Drilling diameter | Dimensions | |
| SLOT | (Ø x H): 115 x 24.3 mm |
|
| IP protection | Voltage | |
| 20 | 220/240V AC |
|
| Detector | Detection distance | |
| IR + Twilight | 12 m | |
| Adjustable detector | Angle opening | |
| Yes | H 160 | |
| Hole diameter | Dimensions | |
| SLOT | (L x W x H): 125 77 x 85 mm | |
| IP protection | Voltage | |
| 44 | 220/240V AC |
|
Kanlux SLICK JQ is a motion sensor with a maximum motion detection range of 12 m. It is possible to set the lighting time and the level of light intensity at which the sensor operates.
Sometimes small ideas make all the difference: this is the case with the Schuko plug with pull-out ring, which makes it easier and safer to connect and disconnect the plug from a socket.
What's more, the Schuko comfort plug can be fitted and removed with just one screw, simplifying wiring operations.
Waterproof junction box with 4 IP68 inputs, miidex 7232
Electrical cable diameter 9 to 12 mm
Dimensions (L x W x H): 145 x 110 x 56 mm
Voltage: 16A / 450V max
IP68 protection
Connector: 3-wire Flexible, rigid, semi-rigid cable
| Power | Output voltage | |
| 20-40w x2W | 60-130V DC / 280mA | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 87 x 40 x 15 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 6-10w * 1W | 18-34V DC / 600mA | |
| Input voltage | IP protection | |
| 85/265V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 65 x 35 x 24 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Switch Sensor | Detection distance | |
| Non-contact | 0 to 3.5 cm | |
| Adjustable sensor | Angle opening | |
| No | 90° | |
| Drilling diameter | Dimensions | |
| - | (L x W x H): 74.6 x 36 x 18 mm | |
| IP protection | Voltage | |
| 20 | 220-240V AC | |
With a simple movement of the hand at a distance of 0 to 3.5 cm from the sensor, you can switch any light on or off. It has a power rating of up to 300W, so you can switch a single bulb or several downlights in a corridor on and off. The light will remain on until another hand movement is detected. The sensor's angle of detection is 90º, making it easy to switch on from any position.
This short-range, non-contact sensor switch is a perfect solution for areas with high pedestrian traffic, to prevent the transmission of bacteria and viruses through contact.
Light up your home discreetly with the Short Range Contactless Sensor Switch for Motion Lighting
| Detector | Detection distance | |
| IR + Twilight | 8 m | |
| Adjustable detector | Angle opening | |
| Yes | 360° | |
| Drilling diameter | Dimensions | |
| SLOT | (Ø x H): 115 x 25 mm |
|
| IP protection | Voltage | |
| 20 | 220/240V AC |
|
Kanlux ZONA FLAT is an infra-red motion detector which detects over a maximum range of 8m. It also detects 360°. On the ZONA FLAT, you can also adjust the time delay from 10s to 15min, and set the light detection threshold.
| Detector | Detection distance | |
| Twilight | 5 m | |
| Adjustable sensor | Maximum power | |
| Yes | 10 A | |
| Drilling diameter | Dimensions | |
| Projection | - | |
| IP protection | Voltage | |
| 20/65 | 220/240V AC |
|
Kanlux AS-10 is a twilight detector. It is used to switch on and off the power circuits of the lighting system or other electrical receivers, depending on the level of natural light intensity (day/night).
| Power | Output voltage | |
| 24W Max. | 18-42V DC / 300mA | |
| Input voltage | IP protection | |
| 85/277V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| Yes 0-10V | (L x W x H): 96 x 36 x 25 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Detector | Detection range | |
| IR + Twilight | 6 m | |
| Adjustable sensor | Field of view | |
| Yes | 360° | |
| Drill hole diameter | Dimensions | |
| Ø 18 mm / projection | (L x H): 44 x 26 H mm | |
| IP rating | Voltage | |
| 20 | 220/240V AC |
|
A highly sensitive microwave sensor with adjustable settings (illumination duration, activation threshold and detection range).
| Switch Sensor | Detection distance | |
| Non-contact | 0 to 3.5 cm | |
| Adjustable sensor | Angle opening | |
| No | 90° | |
| Drilling diameter | Dimensions | |
| - | (L x W x H): 21 x 36 x 21 mm | |
| IP protection | Voltage | |
| 20 | 220-240V AC | |
The Contactless Detection Switch for Cabinet Doors allows any light in a cabinet to be switched on without the need for a wall switch.
Features of the Contactless Detection Switch for Cabinet Doors
The Contactless Detection Switch for Cabinet Doors detects when the door is opened by switching on the light to which it is connected. This light will remain on until the sensor detects that the door is closed, at which point the light will be switched off. The sensor's angle of detection is 90°.
Applications of the Contactless Detection Switch for Cabinet Doors
The Contactless Detection Switch for Cabinet Doors is the perfect solution for illuminating your tool cabinets, wardrobes and kitchen cupboards, making it easier to see and select what you need.
| Power | Output voltage | |
| 36W | 30-40V DC / 900 mA | |
| Input voltage | IP protection | |
| 180-264V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 118 x 42 x 28 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 40W | 30 -42V DC / 970mA | |
| Input voltage | IP protection | |
| 180/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 120 X 45 x 30 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Detector | Detection distance | |
| HF + Twilight | 4 / 5 m | |
| Adjustable detector | Angle opening | |
| Yes | 30 - 150° | |
| Dimensions (L x W x H) | IP protection | |
| 200 x 56 x 72 mm | 65 | |
| Max. LED wattage | Voltage | |
| 400W | 220/240V AC |
|
| Detector | Detection distance | |
| IR + Twilight | 6 m | |
| Adjustable detector | Angle opening | |
| Yes | H 140 / V 45 | |
| Hole diameter | Dimensions | |
| SLOT | (W x H): 80 x 67 mm | |
| IP protection | Voltage | |
| 44 | 220/240V AC |
|
Kanlux ALER mini is a motion detector that can be effective up to 6 metres away. It is possible to adjust the time delay and operating light intensity.
| Detector | Detection distance | |
| IR + Twilight | 6 m | |
| Adjustable detector | Angle opening | |
| Yes | H 140 / V 45 | |
| Hole diameter | Dimensions | |
| SLOT | (W x H): 80 x 67 mm | |
| IP protection | Voltage | |
| 44 | 220/240V AC |
|
ALER MINI is an infrared motion detector with an attractive, minimalist design. It has a horizontal detection range of 140° and a vertical range of 45°, and thanks to its tilting mechanism (vertical 45°, horizontal 90°) it can be adapted to suit all your needs. Thanks to its waterproof rating (IP44), this detector can be installed in places exposed to the elements.
| Detector | Detection range | |
| HF + Twilight | 6 m | |
| Adjustable sensor | Angle of coverage | |
| No | 360° | |
| Drill hole diameter | Dimensions | |
| Ø 63–66 mm | (Ø x H): 76 x 66 mm | |
| IP rating | Voltage | |
| 20 | 220/240V AC |
|
PRESENSOR is a range of microwave presence detectors. The range stands out from standard HF detectors thanks to its 24GHz technology, which has a significant impact on detection accuracy. As a result, the presence detector is capable of detecting all types of movement, such as a person moving around, subtle movements such as working at a computer, or even static presence such as someone watching television, making it easier to adjust the lighting to suit the situation.
| Detector | Detection range | |
| HF + Twilight | 6 m | |
| Adjustable sensor | Angle of coverage | |
| No | 360° | |
| Drill hole diameter | Dimensions | |
| Ø 63–66 mm | (Ø x H): 76 x 66 mm | |
| IP rating | Voltage | |
| 20 | 220/240V AC |
|
PRESENSOR is a range of microwave presence detectors. The range stands out from standard HF detectors thanks to its 24GHz technology, which has a significant impact on detection accuracy. As a result, the presence detector is capable of detecting all types of movement, such as a person moving around, subtle movements such as working at a computer, or even static presence such as someone watching television, making it easier to adjust the lighting to suit the situation.
| Detector | Detection distance | |
| IR + Twilight | 6 m | |
| Adjustable detector | Angle opening | |
| Yes | 360° | |
| Drilling diameter | Dimensions | |
| SLOT | (Ø x H): 115 x 25 mm |
|
| IP protection | Voltage | |
| 20 | 220/240V AC |
|
ZONA FLAT is an ultra-compact motion detector designed for discreet installation in modern spaces. Thanks to its compact design, it blends in perfectly with its surroundings without disrupting the aesthetics of the interior. It detects movement accurately within a radius of 8 metres and gives you total control over the parameters - setting the lighting duration (from 10 seconds to 15 minutes) and the light intensity threshold. It's the perfect solution for intelligent lighting control, combining minimalist design with maximum functionality.
| Detector | Detection distance | |
| IR + Twilight | 10 m | |
| Adjustable detector | Angle opening | |
| Yes | H 140 / V 45 | |
| Hole diameter | Dimensions | |
| SLOT | (W x H): 120 x 52 mm | |
| IP protection | Voltage | |
| 65 | 220/240V AC |
|
The latest infrared motion detector in the ALER range. Its maximum detection range of 12 m and high IP65 protection rating make it a universal solution for many applications. Available in two colours for wall mounting.
| Detector | Detection range | |
| HF + Twilight | 8 m | |
| Adjustable sensor | Angle of coverage | |
| Yes | 180/360° | |
| Drill hole diameter | Dimensions | |
| Projection | (L x W x H): 78 x 37 x 25mm | |
| IP rating | Voltage | |
| 20 | 220/240V AC |
|
A highly sensitive microwave sensor with adjustable settings (illumination duration, activation threshold and detection range).
TheContact Cabinet Switch is the ideal choice for automatically lighting the cabinets and/or shelves in your home. Its design enables the LED strips installed in your wardrobes to be switched on or off when a door is opened or closed. To work properly, it must be installed correctly, allowing the button to be controlled by the door when opening or closing.
2 x 0.5 mm² cross-section
Cable: 2 x 37 / 0.11 mm
Technical specifications
Inner conductor, OFC material (99.9% oxygen-free copper)
Inner conductor, 0.5 mm² wire cross-section
General
Colour red, black
Diameter 4.4 mm
Sold by the Ml.
2-wire black flat cable 0.75mm sold by the metre
Rolls of 50ml max.
| Detector | Detection distance | |
| H.F + Twilight | 10 m | |
| Adjustable detector | Angle opening | |
| Yes | H 360 / V 140 | |
| Drilling diameter | Dimensions | |
| Projection | (L x W x H): 70 x 40 x 40 mm | |
| IP protection | Voltage | |
| 20 | 220/240V AC |
|
Kanlux ROLF JQ is a microwave motion sensor. The maximum horizontal operating angle of the sensor is 360 degrees. It is possible to set the lighting time and the level of light intensity at which the sensor operates.
Dimensions (L x W): 130 x 17 mm
Automatic waterproof connector IP68 250V 16A Black 3 wires M/F, miidex 7213
Dimensions Ø Wires from 0.5 to 2.5 mm² (0.5 to 2.5 mm²)
Dimensions ( Ø x L): Ø29 x 109 mm
Voltage: 16A / 250V max
IP68 protection
| Detector | Detection distance | |
| IR + Twilight | 12 m | |
| Adjustable detector | Angle opening | |
| Yes | H 160 / V 20 | |
| Drilling diameter | Dimensions | |
| SLOT | (W x H): 97 x 75 mm | |
| IP protection | Voltage | |
| 44 | 220/240V AC |
|
Kanlux ALER JQ is a motion detector that can be effective up to 12 metres away. It is possible to adjust the time delay and operating light intensity.
| Power | Output voltage | |
| 12W | 21-45V DC / 300mA | |
| Input voltage | IP protection | |
| 220-240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| Yes TRIAC | (L x W x H): 88 x 28 x 20 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
Fitting: E14
Dimensions (Ø x H): Ø 39 x 64 mm
| Power | Output voltage | |
| 5-7 W | 12-24V DC 250mA | |
| Input voltage | IP protection | |
| 220-240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| Yes TRIAC | (L x W x H): 85 x 35 x 23 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
Wire Ø dimensions from 0.2 to 4 mm²
Dimensions (L x W x H): 13 x 18 x 9.5 mm
Voltage: 32A / 450V max
IP20 protection
Packaging: Box of 50
Base: B22
Dimensions (Ø x H): Ø 36 x 61 mm
Voltage: 220-240V AC
Maximum power: 150 W
IP protection: IP20
Width: 85 mm
Height: 80 mm
Material: PCB
Wire Ø dimensions from 0.2 to 4 mm²
Dimensions (L x W x H): 18 x 18 x 9.5 mm
Voltage: 32A / 450V max
IP20 protection
Packaging: Box of 50
The advantages of an LED ribbon anti-flicker rectifier are as follows:
Improved visibility: The anti-flicker rectifier eliminates flicker and variations in brightness, making the LED ribbon more visible and pleasant to look at.
Reduced eye fatigue: Flicker can cause eye fatigue, particularly with prolonged use. The anti-flicker rectifier can help reduce eye fatigue and improve visual comfort.
Longer life: Flicker can accelerate wear on LEDs, reducing their life. The anti-flicker rectifier can help extend LED life.
The flicker rectifier works by converting alternating current (AC) into direct current (DC). Direct current is more stable than alternating current, eliminating flicker and variations in brightness.
