Filter By
Availability
Shape
Ampère
Brand
Temperature in K or Colour
Power in Watt
Dimmable
Guarantee
Bulb / Holder / Product type
Exterior finish
Power supply
IP protection
Voltage
Type of product 2
DC output voltage
Driver intensity
New Products
New products
LED ribbon and power supplies
Product Catalogue
- LED ribbons: Various types of LED ribbons (monochrome, RGB, RGBW, high density, waterproof, etc. 12 / 24v and 220V).
- Accessories: Aluminium profile, controllers, connectors, power supplies, mounting brackets.
- Complete kits: ready-to-use solutions including LED ribbon, controller and power supply.
- Power supplies: a full range of LED power supplies from 12V to 24V, waterproof or not.
Subcategories
There are 201 products.
Active filters
- Availability: Available
Jumper & 2 screws led ribbon 5050 230V mono colour x1
Jumper & 2 screws led ribbon 5050 230V mono colour x1
We recommend 1 jumper every 20 cm maximum.
Led ribbon 230v 2835 Como 12W/m ip65 3000k sold by the ml, LM2353-1ML
| Power | Lumens | Voltage | Angle 120° | |
| 12 W/m | 1400 Lm/m | 170/265 VAC | ||
| IP protection | Colour temperature | |||
| 65 | 3000 K | |||
| Number of leds per ml | Dimensions (L x W x H) | |||
| 110 | 1000 x 14 x 6 mm | |||
| Dimmable | No | |||
Can be cut every 10 cm
MUST ADD REF: LM2357 FOR A LENGTH (MAX 50ML).
220V AC direct supply, no rectifier system.
- Can be welded in the workshop with ref: LM0004
LED power supply 80W 24V DC 3.4A IP67 slim
| Power | Output voltage | |
| 80W | 24V DC / 3.4 A | |
| Input voltage | IP protection | |
| 180/250V 50/60Hz | 67 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 185 x 45 x 22 | |
Dimensions may vary.
Triac RF + Push Dimmer 240V AC
| Total output | Input voltage | Power | Control | |
| 1.36A | 240V | 300w | 30 m | |
| Downloads available : | ||||
| manual | ||||
Sold individually - Remote control not supplied.
Diffuser clip transparent 2m for led profile 15.4
- Material: transparent pvc
- Dimensions (L x W x H): 2000 x 13.1 x 3.8 mm
2M anodised aluminium profile for flat LED ribbon
- Material: aluminium alloy
- Dimensions (L x W x H): 2000 x 20 x 8 mm
Please note that LED profiles are sold without diffuser, termination and mounting brackets.
Led Ribbon Adapter Cable 220Vac Prostrip & Cobpoint
Led ribbon power supply for 230v led ribbon
Compatible with led ribbon Prostrip & Cobpoint :
LM2611 / LM2612 / LM2613
LM2661 - LM2662 / LM2663 / LM2664
Sid Aluminium Profile - 2 Metres
- Material: aluminium alloy
- Dimensions (L x W x H): 2000 x 17.4 x 7 mm
- Includes: 2 end caps and 1 diffuser
Led ribbon 220V Ac Cobpoint 10W/m Ip65 2700K sold by the ml
| Power | Lumens | Voltage | Angle 120° | |
| 10 W/m | 1100 Lm/m | 220 VAC | ||
| IP protection | Colour temperature | |||
| 65 | 2700 K | |||
| Number of leds per ml | Dimensions (L x W x H) | |||
| 110 | 1000 x 10 x 3 mm | |||
| Dimmable | No | |||
Can be cut every 10 cm
REF: LM2615 MUST BE ADDED FOR A LENGTH (MAX 50ML).
220V AC direct supply, no rectifier system.
- Can be welded in the workshop with ref: LM0004
Aluminium Corner Profile Kopep white diffuser- 2 Metres
- Material: aluminium alloy
- Dimensions (L x W x H): 2000 x 19 x 19 mm
- Includes: 2 end caps and 1 diffuser
Aluminium Sub Profile - 2 Metres
- Material: aluminium alloy
- Dimensions (L x W x H): 2000 x 24.7 x 7 mm
- Includes: 2 end caps and 1 diffuser
Adapter Cable For 220Vac Led Ribbon Ruzok and Brescia
Power supply for led ribbon 230v 2835
Compatible with led ribbon Ruzok and Brescia:
LM2341 / LM2342 / LM2343 / LM2344
LM2335 / LM2336 / LM2337
Electronic halogen transformer 12V/AC 20-40w max
| Power | Output voltage | |
| 20/40W | 12V AC / 3.34 A | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 65 x 35 x 20 | |
Dimensions may vary.
Last units on promotion
Warning! 3 months warranty, no returns or exchanges.
These transformers are suitable for all low-voltage halogen bulbs, but are not suitable for LED bulbs and LED ribbon.
Led ribbon 230v Ac 2835 Prostrip 12W/m ip67 4000k sold by the ml
| Power | Lumens | Voltage | Angle 120° | |
| 12 W/m | 1400 Lm/m | 220 VAC | ||
| IP protection | Colour temperature | |||
| 67 | 4000 K | |||
| Number of leds per ml | Dimensions (L x W x H) | |||
| 110 | 1000 x 10 x 3 mm | |||
| Dimmable | No | |||
Can be cut every 10 cm
REF: LM2615 MUST BE ADDED FOR A LENGTH (MAX 50ML).
220V AC direct supply, no rectifier system.
- Can be welded in the workshop with ref: LM0004
Ribbon Adapter Cable Bergamo Rgb Led 220Vac, welding workshop
With this kit, we make sure that the wires are soldered, tested with a protective butt at the beginning and end of the LED ribbon, and we proceed to test the LED ribbon.
Choose the length you want to comment on the purchase of LED ribbon Bergamo RGB.
(Don't forget to order the remote control and the controller (compulsory) for the 220v RGB LED ribbon to work properly).
Led ribbon 220V Ac Smd2835 Ruzok 17W/m Ip67 4500K sold by the ml
| Power | Lumens | Voltage | Angle 120° | |
| 17 W/m | 1680 Lm/m | 220 VAC | ||
| IP protection | Colour temperature | |||
| 65 | 4500 K | |||
| Number of leds per ml | Dimensions (L x W x H) | |||
| 110 | 1000 x 12 x 5 mm | |||
| Dimmable | No | |||
Can be cut every 10 cm
MUST ADD REF: LM2357 FOR A LENGTH (MAX 20ML).
220V AC direct supply, no rectifier system.
- Can be welded in the workshop with ref: LM0004
- Available from 18/07/2025
Cable soldered to the 220V LED ribbon (Not supplied, to be added according to your 220V LED ribbon)
220Vac LED Ribbon Adapter Cable
Cable soldered to 220V LED ribbon (Not supplied, to be added according to your 220V LED ribbon)
Soldering may take 2 to 3 days.
2.4 GHz LED strip controller CCT
| Total output | Output | Voltage | Control | |
| 10A | 6A/channel | 12-24VDC | 30 m | |
| Downloads available : | ||||
| Manual | ||||
Sold individually - remote control not included.
Kopep Black Aluminium Corner Profile with diffuser - 2 Metres
- Material: black aluminium alloy
- Dimensions (L x W x H): 2000 x 19 x 19 mm
- Includes: 2 end caps and 1 black diffuser
LED power supply 20W 24V DC 0.83A IP67
| Power | Output voltage | |
| 20W | 24V DC / 0.83 A | |
| Input voltage | IP protection | |
| 180/250V 50/60Hz | 67 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 160 x 30 x 20 | |
Dimensions may vary.
Signal amplifier SYS 1 channel
| Total output | Output | Voltage | Control | |
| 15A | 24VDC | 24VDC | - | |
| Downloads available : | ||||
| manual | ||||
Sold individually.
Diffuser clip white 2m for led profile 15.4
- Material: white pvc
- Dimensions (L x W x H): 2000 x 13.1 x 3.8 mm
Controller SYS 1 channel
| Total output | Output | Voltage | Control | |
| 15A | 24VDC | 24VDC | 30 m | |
| Downloads available : | ||||
| manual | ||||
Sold individually - Remote control not supplied.
5V 1A USB power adapter
| Power | Output voltage | |
| 5W | 5V DC / 1 A | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
Dimensions may vary.
2 metre suspension kit for linear 1.5m & 3m X2
2 metre suspension kit for linear 1.5m & 3m X2
2M anodised aluminium profile for XL flat LED ribbon
- Material: aluminium alloy
- Dimensions (L x W x H): 2000 x 24 x 9 mm
Please note that LED profiles are sold without diffusers, terminations and mounting brackets.
PLACO 2-metre aluminium profile and translucent cover
- Material: aluminium alloy
- Dimensions (L x W x H): 2000 x 61.5 x 13.8 mm
- Includes: 2 end caps and 1 diffuser
Adapter Cable For Led Ribbon 220Vac Cob
Led ribbon power supply for 230v led ribbon
Compatible with Cobpro and Cobpoint
2.4 GHz single-colour LED strip controller
| Total output | Output | Voltage | Control | |
| 10A | 6A/channel | 12-24VDC | 30 m | |
| Downloads available : | ||||
| manual | ||||
Sold individually - remote control not included.
2M anodised aluminium profile for 45° LED ribbon
- Material: aluminium alloy
- Dimensions (L x W x H): 2000 x 17.8 x 17.8 mm
Please note that LED profiles are sold without diffuser, termination and mounting brackets.
Led ribbon 230v Ac 2835 Prostrip 12W/m ip67 2700k sold by the ml
| Power | Lumens | Voltage | Angle 120° | |
| 12 W/m | 1400 Lm/m | 220 VAC | ||
| IP protection | Colour temperature | |||
| 67 | 2700 K | |||
| Number of leds per ml | Dimensions (L x W x H) | |||
| 110 | 1000 x 10 x 3 mm | |||
| Dimmable | No | |||
Can be cut every 10 cm
REF: LM2615 MUST BE ADDED FOR A LENGTH (MAX 50ML).
220V AC direct supply, no rectifier system.
- Can be welded in the workshop with ref: LM0004
RGB touchscreen remote control&CCT 4 Zones
| Remote control | Batteries | Voltage | Control | |
| 4 zones | 2xAAA | 3V | 30 m | |
| Downloads available : | ||||
| manual | ||||
Sold individually - Batteries not included.
Led ribbon 230v 2835 Como 12W/m ip65 4000k sold by the ml
| Power | Lumens | Voltage | Angle 120° | |
| 12 W/m | 1400 Lm/m | 170/265 VAC | ||
| IP protection | Colour temperature | |||
| 65 | 4000 K | |||
| Number of leds / ml | Dimensions (L x W x H) | |||
| 110 | 1000 x 14 x 6 mm | |||
| Dimmable | No | |||
Can be cut every 10 cm
MUST ADD REF: LM2357 FOR A LENGTH (MAX 50ML).
220V AC direct supply, no rectifier system.
- Can be welded in the workshop with ref: LM0004
Adapter Cable For Led Ribbon 220Vac Como
Power supply for led ribbon 230v 2835
Compatible with led ribbon Como:
LM2351 / LM2352 / LM2353 / LM2354
Orer 2 metre aluminium profile
- Material: aluminium alloy
- Dimensions (L x W x H): 2000 x 52.5 x 13.3 mm
- Included: 2 nozzles, 1 diffuser
WiFi 75 W monochrome dimmable LED driver
| Total output | Input voltage | Voltage | Control | |
| 3A | 240V | 12-24VDC | 30 m | |
| Downloads available : | ||||
| manual | ||||
Sold individually - Remote control not supplied.
4-zone remote control with rotary wheel
| Remote control | Batteries | Voltage | Control | |
| 4 zones | 2xAAA | 3V | 30 m | |
| Downloads available : | ||||
| manual | ||||
Sold individually - Batteries not included.
LED power supply 6W 12VDC 500mA
| Power | Output voltage | |
| 6W | 12V DC / 0.5 A | |
| Input voltage | IP protection | |
| 110/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 42 x 40 x 20 | |
Dimensions may vary.
Profile 2m Anodised Aluminium Groove for LED strips
- Material: aluminium alloy
- Dimensions (L x W x H): 2000 x 18 x 7 mm
Please note that LED profiles are sold without diffusers, terminations and mounting brackets.
Light diffuser for aluminium profiles SHADE 2ml
- Diffuser: Opaque
- Dimensions (L x W x H): 2000 x 19.2 x 10.9 mm
Profile adapter: 26561