Electrical accessories & LED drivers

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Complete 3-hole Rose-One System kit comprising a 120 mm rosette with a 200 mm round metal decorative cover and all the fixing accessories.

This kit contains cable ties specially designed not to hide the decor thanks to their flat shape and transparent colour.

Perfect for lighting large rooms and multi-suspension ceiling lights, this system will suit all types of interiors thanks to our wide selection of designs. Choose the one you prefer from the menu.

ATTENTION: the accessories for connecting the rose to the power line are NOT included in the kit, but can be purchased separately.

• Finish: Black

• Dimensions (Ø x H): Ø 120 x 35 mm

• Round cover Ø 200 mm

The 3W LED Emergency Beacon has a highly waterproof casing and an IP65 protection rating, making it highly resistant to the elements, so it can be installed both indoors and outdoors. It has protective fuses and a battery with a runtime of up to 3 hours. Its integrated LEDs provide high efficiency, durability and excellent performance.

The LED Emergency Beacon provides both permanent and non-permanent lighting. This emergency light is pre-configured as a non-permanent light. By changing the position of the PCB connector, you can select the permanent operating mode.

The 3W LED Emergency Beacon is the most practical, economical and simple solution in the event of a power failure. It is easy to install on both walls and ceilings. It can also be surface-mounted, thanks to the part it incorporates that adapts to the luminaire.

* LED operating indicator.

* For the emergency lighting to work properly, you need to connect the battery pre-wiring.

A dimmable LED bulb requires a carefully designed dimmer.

Connecting an LED bulb to a traditional dimmer often results in irregular operation, flickering light and a high risk of burning out the bulb.

Our button dimmer, on the other hand, has been designed for all types of bulb: traditional filament, energy-saving, dimmable and dimmable LED.

Designed and produced 100% in Italy, the LED dimmer with knob will allow you to regulate the intensity of light more comfortably and safely.

Download installation instructions (412.04k)

6X0.22²

You can use this cable to connect RGB+ LED stripsCCT together. This is ideal when you want to connect several LED strips that are a long way apart to the same controller.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Suitable for lamps and small appliances that do not require earthing.

• Black PVC-sheathed cable

• Brown and blue conductors

• 24 strands per conductor

• Suitable for lamps and small appliances that do not require earthing

• Electric cable diameter from 9 to 12 mm

• Dimensions ( L x W x H): 130 x 105 x 37 mm

• Voltage: 16A / 450V max

• IP68 protection

  • • Connector: 3-wire Flexible, rigid, semi-rigid cable

Sometimes small ideas make all the difference: this is the case with the Schuko plug with pull-out ring, which makes it easier and safer to connect and disconnect the plug from a socket.

What's more, the Schuko comfort plug can be fitted and removed with just one screw, simplifying wiring operations.

This is a resistor to be connected in parallel with an energy-saving bulb or LED to obtain dimming.

Be careful, this resistor heats up, so keep it away from plastic materials and it does not work with all dimmers on the market.

"Supplied without connector

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current to light up the LED chips.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

With a simple movement of the hand at a distance of 0 to 3.5 cm from the sensor, you can switch any light on or off. It has a power rating of up to 300W, so you can switch a single bulb or several downlights in a corridor on and off. The light will remain on until another hand movement is detected. The sensor's angle of detection is 90º, making it easy to switch on from any position.

This short-range, non-contact sensor switch is a perfect solution for areas with high pedestrian traffic, to prevent the transmission of bacteria and viruses through contact.

Light up your home discreetly with the Short Range Contactless Sensor Switch for Motion Lighting

5X0.22²

You can use this cable to connect RGB+W LED strips together. This is ideal when you want to connect several LED strips that are a long way apart to the same controller.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

The 3-hole metal rose kit can be used to assemble a wall or ceiling lamp with three light sources.
Metal is a durable material and can be placed in a wide range of environments, whatever their style: whether minimal, Scandinavian, industrial or classic, you'll find the metal finish to suit you!

• Finish: Black

• Dimensions (Ø x H): Ø 120 x 10 mm

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED Driver transforms AC mains current into DC current to light up the LED chips.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

The Textile Electrical Cable is an electrical sheath with a cross-section of 1.5mm² made up of three pure copper multi-core cables with a diameter of 0.75mm² each, making it ideal for lighting installations. It has a textile coating available in different colours.

Combine it with the sockets, suspension cables and finials in the DIY collection. Decorate your rooms and create your own personalised lamps!

* Cable diameter: 6mm.

* Product made to your specifications, and therefore exempt from the right of withdrawal.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

The Contactless Detection Switch for Cabinet Doors allows any light in a cabinet to be switched on without the need for a wall switch.

Features of the Contactless Detection Switch for Cabinet Doors

The Contactless Detection Switch for Cabinet Doors detects when the door is opened by switching on the light to which it is connected. This light will remain on until the sensor detects that the door is closed, at which point the light will be switched off. The sensor's angle of detection is 90°.

Applications of the Contactless Detection Switch for Cabinet Doors

The Contactless Detection Switch for Cabinet Doors is the perfect solution for illuminating your tool cabinets, wardrobes and kitchen cupboards, making it easier to see and select what you need.