Best sellers

2-wire black flat cable 0.75mm sold by the metre

Rolls of 50ml max.

The Contactless Detection Switch for Cabinet Doors allows any light in a cabinet to be switched on without the need for a wall switch.

Features of the Contactless Detection Switch for Cabinet Doors

The Contactless Detection Switch for Cabinet Doors detects when the door is opened by switching on the light to which it is connected. This light will remain on until the sensor detects that the door is closed, at which point the light will be switched off. The sensor's angle of detection is 90°.

Applications of the Contactless Detection Switch for Cabinet Doors

The Contactless Detection Switch for Cabinet Doors is the perfect solution for illuminating your tool cabinets, wardrobes and kitchen cupboards, making it easier to see and select what you need.

Dimensions may vary.

*Stable performance: no flickering after connection, good anti-interference. The casing is made of plastic to protect it from dust and moisture.
*Safety: no transformer noise, insulated end cover. The protective device is equipped with overload protection, overvoltage protection, short-circuit protection and overheating protection.
*Small and flat: with dimensions of 42 x 40 x 20 mm, it is small and can be easily installed in any room without compromising appearance. Inputs and outputs are clearly marked for easy electrical connection.
*Easy connection: simple connections via screw terminals allow easy replacement of existing transformers.
* Wide application: suitable for a variety of low voltage 12 V LED applications, including LED strip lights, doorbells, cabinet lights, LED displays.

This switch is ideal for making your own textile cords for floor lamps.

The Downlight LED COB Adjustable 1W White spotlight is perfect for ambient lighting or interior signage.

Its single built-in LED emits 80 lumens of light, the equivalent of a 10W incandescent bulb. This saves up to 90% on electricity consumption. Multi-voltage support 85-265V AC.

The light emitted by the Downlight LED COB 1W Adjustable Spot is of high quality and focuses at an angle of 60°. It is mainly used as a decorative or auxiliary light in many interior spaces, such as domestic and commercial environments. Made from aluminium.

Dimensions Ø 0.5 to 2.5 mm² wires

Dimensions (L x W): 152 x 152 mm

Voltage: 16A / 250V max

IP68 protection

Connector: 3 wires Flexible, rigid, semi-rigid cable

24V DC LED power supply required / controller and remote control not supplied

Calculate your power supply:

The power in W of your power supply is proportional to the length in ml.

Dimensions may vary.

*Stable performance: no flickering after connection, good anti-interference. The casing is made of plastic to protect it from dust and moisture.
*Safety: no transformer noise, insulated end cover. The protective device is equipped with overload protection, overvoltage protection, short-circuit protection and overheating protection.
*Small and flat: with dimensions of 42 x 40 x 20 mm, it is small and can be easily installed in any room without compromising appearance. Inputs and outputs are clearly marked for easy electrical connection.
*Easy connection: simple connections via screw terminals allow easy replacement of existing transformers.
* Wide application: suitable for a variety of low voltage 12 V LED applications, including LED strip lights, doorbells, cabinet lights, LED displays.

The luminaire is sold without a bulb.

The customer's visual perception of the sizes, colours, textures, etc. of our products may be affected by factors such as ambient light, screen calibration, viewing angle or each user's device. The customer must bear in mind that returns made for reasons unrelated to the functioning of the product will be charged to the customer.

The 85x85x45 mm Watertight Junction Box with snap-on lid is perfect for installations in all conditions.

It incorporates 7 cones with a maximum dimension of 25 mm, making connections easy and safe. Manufactured in accordance with UNE-EN 60670-1:2006 and UNE 20324:1993. The 85x85x45 mm Watertight Junction Box with snap-on cover is designed to be practical and durable. It has IP55 protection and its impact resistance index is IK07. It is also fire resistant (glow wire at 650º). Operating temperature: -25ºC (+60ºC).

With the Weatherproof Junction Box 85x85x45 mm with snap-on lid on our DESIGN-LED online site, you can perfectly protect all types of electrical junctions.

• Material: aluminium alloy
• Dimensions (L x W x H): 2000 x 61.5 x 13.8 mm
• Includes: 2 end caps and 1 diffuser

The 1-hole metal rose kit is used to assemble a wall or ceiling light with a single light source. Metal is a durable material that can be placed in a wide range of environments, whatever their style: whether minimal, Scandinavian, industrial or classic, you'll find the metal finish that's right for you!

• Finish: Black
• Dimensions (Ø x H): Ø 120 x 10 mm

Make your rosettes and sockets even more elegant by using the metal cable clamp with cylindrical stud.

With threaded tube, nut and washer, it fits any socket or rosette.

This pack includes 2 pieces.

Textile Electrical Cable Black 3X075M² 3ml, dla 132672

The Textile Electrical Cable is an electrical sheath with a cross-section of 1.5mm² made up of three pure copper multi-core cables with a diameter of 0.75mm² each, making it ideal for lighting installations. It has a textile coating available in different colours.

Combine it with the sockets, suspension cables and finials in the DIY collection. Decorate your rooms and create your own personalised lamps!

* Cable diameter: 6mm.

* Product made to your specifications, and therefore exempt from the right of withdrawal.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

TheContact Cabinet Switch is the ideal choice for automatically lighting the cabinets and/or shelves in your home. Its design enables the LED strips installed in your wardrobes to be switched on or off when a door is opened or closed. To work properly, it must be installed correctly, allowing the button to be controlled by the door when opening or closing.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

The luminaire is sold without a bulb.

The customer's visual perception of the sizes, colours, textures, etc. of our products may be affected by factors such as ambient light, screen calibration, viewing angle or each user's device. The customer must bear in mind that returns made for reasons unrelated to the functioning of the product will be charged to the customer.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Make your rosettes and sockets even more elegant by using the metal cable clamp with cylindrical stud.

With threaded tube, nut and washer, it fits any socket or rosette.

This pack includes 2 pieces.

Parameter of the RF wall-mounted remote control :

Size: 86 * 86 mm

Frequency: 433 MHz Battery: 1 x 27 A12 V battery (not included)

Control distance: 20-50 metres in open space

(Warning: the switch requires a smart switch to operate. optional)

Suspended aluminium lamp with a modern design of interlaced figures.

It has an integrated LED luminaire that diffuses a strong, even light with a total power of 50W and a luminous intensity of 3200 lumens.

This lamp brings a unique and elegant style to any interior.

With a simple movement of the hand at a distance of 0 to 3.5 cm from the sensor, you can switch any light on or off. It has a power rating of up to 300W, so you can switch a single bulb or several downlights in a corridor on and off. The light will remain on until another hand movement is detected. The sensor's angle of detection is 90º, making it easy to switch on from any position.

This short-range, non-contact sensor switch is a perfect solution for areas with high pedestrian traffic, to prevent the transmission of bacteria and viruses through contact.

Light up your home discreetly with the Short Range Contactless Sensor Switch for Motion Lighting

This switch is ideal for making your own textile cords for table lamps.

Dimensions may vary.

*Stable performance: no flickering after connection, good anti-interference. The casing is made of plastic to protect it from dust and moisture.
*Safety: no transformer noise, insulated end cover. The protective device is equipped with overload protection, overvoltage protection, short-circuit protection and overheating protection.
*Small and flat: with dimensions of 42 x 40 x 20 mm, it is small and can be easily installed in any room without compromising appearance. Inputs and outputs are clearly marked for easy electrical connection.
*Easy connection: simple connections via screw terminals allow easy replacement of existing transformers.
* Wide application: suitable for a variety of low voltage 12 V LED applications, including LED strip lights, doorbells, cabinet lights, LED displays.

Discover the "Corda" floor lamp, a real jewel of captivating design that offers a unique visual and environmental experience.

Thanks to its cutting-edge technology and high density of LED chips, it guarantees an even distribution of light, adjustable to 3 levels of intensity using the switch. So you can create the perfect atmosphere for any occasion.

The luminaire is sold without an E27 bulb.

The resin "Ximpa" pendant lamp, depicting a monkey hanging from a rope and holding a light bulb, is a fun and bold piece of design that's sure to win you over.

This designer lamp will add an original and playful touch to any interior space, creating an atmosphere full of charm and creativity.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

The luminaire is sold without a 2xE27 and G9 bulb.

The Ethan Metal Reading Floor Lamp is the perfect partner for your reading corner. This floor lamp with its classic, simple design will blend in effortlessly with any setting.

This 92x92x42mm Universal Surface-Mounted Box allows you to install flush-mounted switchgear without drilling holes in the wall.

Made from halogen-free polycarbonate (PC), this universal box is highly resistant and has pre-cut entrances for tubes, cables and trunking. Thanks to its dimensions, you can install standard-sized switchgear, so it's compatible with the majority of flush-mounted switchgear series on the market.

The 92x92x42 mm Universal Surface-mounted Box for Apparatus is generally used for indoor installations, normally exposed, of shielded tubes or trunking. A product that will certainly fulfil its purpose and allow you to add sockets or switches to any surface, for example.

* Fixing screws included.