Best sellers

• Power consumption: 33W 4000K / 16W (3000K / 6500K)

24V DC LED power supply required / controller and remote control not supplied

Calculate your power supply:

The power in W of your power supply is proportional to the length in ml.

Bulb not included.

Kanlux CHIRO GU10 is a completely new solution in the decorative lighting category. It is a SPOT type luminaire that can be recessed in a false ceiling as a single point of light. The luminaire's greatest assets are its unique design and the way it can be installed.

Suspended aluminium lamp with a modern design of interlaced figures.

It has an integrated LED luminaire that diffuses a strong, even light with a total power of 50W and a luminous intensity of 3200 lumens.

This lamp brings a unique and elegant style to any interior.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Bulb not included.

Delicate edges, curved lines and a rounded shape give Kanlux BORD luminaires a touch of elegance and subtlety. Their modern design, simple elegance and rounded shape ensure that these luminaires will blend in with both private and commercial spaces.

Kanlux ROLF JQ is a microwave motion sensor. The maximum horizontal operating angle of the sensor is 360 degrees. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Dimensions may vary.

Kanlux TRETO is an electronic DC power supply with a power rating.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Supply voltage: 110-250V AC 50/60Hz
Maximum load: 10A
Maximum power: 2500W
Overvoltage protection: 1500V
Number of 230V sockets: 5
Type of sockets: Schuko
Number of USB 5V 2A sockets: 4x USB-A + 1x USB-C
Protection level: IP22
Cable marking: H05VV-F, 3X1.0 mm2, 0.2 mm
Cable sheath material: PVC
Housing material: ABS
Length: 2.0 [m]:
Switch: Yes, for each socket separately

Supply voltage: 110-250 V AC 50/60 Hz
Maximum load: 10 A
Maximum power: 2,500 W
Overvoltage protection: 1,500 V
Number of 230 V sockets: 5
Protection level: IP22
Cable marking: H05VV-F, 3X1.0 mm2,
sheath 0.2 mm Cable material: PVC
Housing material: ABS
Length: 2.0 [m]:
Switch: Yes, for each socket separately

A highly sensitive microwave sensor with adjustable parameters (illumination time, activation threshold and detection distance).

A highly sensitive microwave sensor with adjustable parameters (illumination time, activation threshold and detection distance).

Batteries not included.

12V DC LED power supply required / controller and remote control not supplied

Calculate your power supply:

The power in W of your power supply is proportional to the length in ml.

This 92x92x42mm Universal Surface-Mounted Box allows you to install flush-mounted switchgear without drilling holes in the wall.

Made from halogen-free polycarbonate (PC), this universal box is highly resistant and has pre-cut entrances for tubes, cables and trunking. Thanks to its dimensions, you can install standard-sized switchgear, so it's compatible with the majority of flush-mounted switchgear series on the market.

The 92x92x42 mm Universal Surface-mounted Box for Apparatus is generally used for indoor installations, normally exposed, of shielded tubes or trunking. A product that will certainly fulfil its purpose and allow you to add sockets or switches to any surface, for example.

* Fixing screws included.

• Dimensions (Ø x H): Ø 107 x 35 mm
• IP protection: 20
• Includes: Battery + Screw and dowel kit
• In stock - From 12/11/2025 - Separately

Kanlux TONIL LED II is a sober wall light with an integrated light source. Its flexible rubber arm allows the light to be directed in the desired direction. At the same time, we can give it the shape you want.

The luminaire is sold without a GU10 bulb.

LAURIN Kanlux spotlights provide a wide choice of adjustable wall and ceiling lights. The simple, minimalist design can be used successfully in many rooms in the home. The choice of light beam direction is an added benefit offered by these luminaires.

Bulb and bulb holder not included.

KANLUX GOVIK is a new recessed luminaire with a unique structure. The use of a small acrylic glass diffuses the light and makes the installed light source invisible. The luminaire looks like a tiny built-in surface-mounted wall light.

Dimensions may vary.

replaces ref: 24240

Kanlux CIRCO is a 5 to 10 W DC electronic power supply

• Dimensions:
• Height (mm): 200
• Width (mm) : 95
• Length (mm): 147
• Number of modules: 6

DB series switching devices, which meet the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, solid walls made of non-combustible materials). They may not be used on flammable surfaces (e.g. plasterboard, wood, etc.), hollow walls or electrical conduits.

The LED Star Projector has a nebulous and undulating projection mode with 6 red, green, blue and 3 mixed colours that can be combined as you wish, with 3 brightness levels (30%, 60% or 100%), ideal for creating a relaxing or romantic atmosphere. The projection mode lets you adjust the speed of movement in 3 modes.

The LED Star Projector works with a remote control for easy light configuration, and can be projected onto both ceiling and wall thanks to its design.

It's ideal for children and adults alike. It's perfect for birthdays, parties, weddings or decorating bedrooms.

The luminaire is sold without an E27 bulb.

The Mercury Metal Pendant combines a unique, elegant design with high-quality finishes.

This type of designer lamp allows us to add a touch of personality to any space, making it unique. The Mercury Metal Pendant is made from aluminium and comes in a range of finishes, so you can choose the one that best suits the style of your space.

The luminaire is sold without an E27 bulb.

The Presley Metal Pendant has a design reminiscent of a "kasa", a type of traditional Japanese hat.

If you're looking for a lighting element that stands out from the crowd, this is undoubtedly a very interesting option, because with its original appearance, there's no doubt that the Presley Pendant will not go unnoticed, whatever room it's installed in. Made from high-quality aluminium

The luminaire is sold without an E27 bulb.

The Lennon Metal Pendant has a distinctive conical shape.

This lamp requires an E27 LED bulb, which must be purchased separately. This way, you can vary the light intensity and colour temperature to suit the style and needs of each space to be lit. Because it's made from aluminium, the durability and quality of its finish are spectacular.

GU10 bulb and socket not included.

Kanlux DALLA is a carefully crafted luminaire designed for indoor installation. It has a movable ring, allowing the light beam to be adjusted. Its universal shapes and colours create an effect of discreet, contemporary elegance.