Availability
Price
Shape
Angle
Detection zone
Ampère
Brand
Temperature in K or Colour
Power in Watt
Dimmable
Guarantee
Bulb / Holder / Product type
Exterior finish
IP protection
Dimensions
Type of product 2
Detector
DC output voltage
Driver intensity
Subcategories
There are 58 products.
Active filters
Dimensions may vary.
NOT COMPATIBLE WITH 12V DC LED STRIPS OR LED TAPE
| Detector | Detection distance | |
| IR + Twilight | 9 m | |
| Adjustable detector | Angle opening | |
| Yes | 160° | |
| Drilling diameter | Dimensions | |
| Ø 61 mm | (L x W x H): 86 x 86 x 42 mm | |
| IP protection | Voltage | |
| 20 | 220/240V AC |
|
A 24V DC LED power supply is required / controller and remote control not included
Calculate the power supply requirements:
The power output (in W) of your power supply is proportional to the length (in ml).
| Power | Output voltage | |
| 12W | 12V AC / 4.16 A | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| Yes Phase break | (L x W x H): 183 x 61 x 32 |
|
Dimensions may vary.
| Power | Lumens | Voltage | Angle | Dimmable |
| 30W | 3300 | 230 V | 65° | No |
| Downloads available: | ||||
| Technical data sheet here (477.78k) | ||||
Last units on promotionWarning! product guaranteed 3 months, neither recovered nor exchanged.
| Detector | Detection distance | |
| RF + Twilight | 4 to 9 m | |
| Adjustable detector | Angle opening | |
| Yes | 180° | |
| Drilling diameter | Dimensions | |
| Ø 68 mm | (L x W x H): 80 x 80 x 47 mm | |
| IP protection | Voltage | |
| 20 | 220/240V AC |
|
| Detector | Detection distance | |
| IR + Twilight | 6 m | |
| Adjustable detector | Angle opening | |
| Yes | 360° | |
| Drilling diameter | Dimensions | |
| SLOT | (Ø x H): 115 x 24.3 mm |
|
| IP protection | Voltage | |
| 20 | 220/240V AC |
|
| Power | Temperature | Lumens |
| 35W | 2700K / 4000K / 6000K | 2975 / 3360 / 3080 |
| Angle | Voltage | IP protection |
| 24° | 230V | 20 |
| Dimmable | Dimensions: | |
| No | Ø 85mm | |
| Power | Output voltage | |
| 40W | 30 -42V DC / 970mA | |
| Input voltage | IP protection | |
| 180/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 120 X 45 x 30 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
Voltage: 220-240V AC
Maximum power: 150 W
IP protection: IP20
Width: 85 mm
Height: 80 mm
Material: PCB
| Power | Output voltage | |
| 13-36W | 3-66V DC / 200-1050 mA | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| DALI or PUSH or 0-10V | (L x W x H): 168 x 39 x 30 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 10W | 12V DC 0.85A | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 100 x 39 x 20 |
|
Dimensions may vary.
| Power | Output voltage | |
| 43W | 21-70V DC / 350-1050mA | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| Yes DALI2 / PUSH | (L x W x H): 135 x 72 x 25 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 45W | 14-43V DC / 1050-1600mA | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| Yes DALI PUSH | (L x W x H): 140 x 75 x 25 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
Universal driver specially designed for Downlight, LED panels and ceiling lights, and other products using either dimmable or non-dimmable LED drivers.
An LED driver converts mains AC power into DC power to power the LED chips.
To check whether a driver will work with your light fitting, PCB or panel, you must check the driver’s output voltage and current.
PLEASE NOTE: you must check the driver’s output voltage and current.
| Detector | Detection distance | |
| IR + Twilight | 3.5 / 8 m | |
| Adjustable detector | Angle opening | |
| Yes | 360° | |
| Drilling diameter | Dimensions | |
| Ø 68 mm | (Ø x H): Ø 80 x 66.5 mm | |
| IP protection | Voltage | |
| 20 | 220/240V AC |
|
| Power | Temperature | Lumens |
| 24W | 4000K | 3000 |
| Angle | Voltage | IP protection |
| 65° | 230V | 20 |
| Detector | Dimensions: | |
| No | LxWxH (mm): 600 x 64 x 78 | |
| Power | Temperature | Lumens |
| 24W | 4000K | 3300 |
| Angle | Voltage | IP protection |
| 65° | 230V | 20 |
| Detector | Dimensions: | |
| No | 1200 x 63 x 73 mm | |
| Power | Temperature | Lumens |
| 24W | 4000K | 3000 |
| Angle | Voltage | IP protection |
| 65° | 230V | 20 |
| Detector | Dimensions: | |
| No | LxWxH (mm) 615 x 58 x 75 | |
| Power | Temperature | Lumens |
| 24W | 4000K | 3000 |
| Angle | Voltage | IP protection |
| 65° | 230V | 20 |
| Detector | Dimensions: | |
| No | LxWxH (mm): 600 x 50 x 73 | |
| Power | Temperature | Lumens |
| 30W | 4000K | 3300 |
| Angle | Voltage | IP protection |
| 65° | 230V | 20 |
| Detector | Dimensions: | |
| No | LxWxH (mm): 1147 x 50 x 73 | |
| Power | Temperature | Lumens |
| 15W | 2700K / 4000K / 6000K | 1275 / 1440 / 1320 |
| Angle | Voltage | IP protection |
| 24° | 230V | 20 |
| Dimmable | Dimensions: | |
| No | Ø 65mm | |
| Power | Temperature | Lumens |
| 25W | 2700K / 4000K / 6000K | 2125/ 2400 / 2200 |
| Angle | Voltage | IP protection |
| 24° | 230V | 20 |
| Dimmable | Dimensions: | |
| No | Ø 75mm | |
| Power | Temperature | Lumens |
| 15W | 2700K / 4000K / 6000K | 1275 / 1440 / 1320 |
| Angle | Voltage | IP protection |
| 24° | 230V | 20 |
| Dimmable | Dimensions: | |
| No | Ø 65mm | |
| Power | Temperature | Lumens |
| 25W | 2700K / 4000K / 6000K | 2100/ 2400 / 2200 |
| Angle | Voltage | IP protection |
| 24° | 230V | 20 |
| Dimmable | Dimensions: | |
| No | Ø 75mm | |
| Power | Temperature | Lumens |
| 35W | 2700K / 4000K / 6000K | 2975 / 3360 / 3080 |
| Angle | Voltage | IP protection |
| 24° | 230V | 20 |
| Dimmable | Dimensions: | |
| No | Ø 85mm | |
| Power | Lumens | Voltage | Angle | Dimmable |
| 30W | 4200 | 230 V | 80° | Yes (DALI/PUSH) |
All ceiling lights are supplied with power supply and safety wire.
| Power | Temperature | Lumens |
| 50W | 4000K | 6000 |
| Angle | Voltage | IP protection |
| 65° | 230V | 20 |
| Detector | Dimensions: | |
| No | LxWxH (mm): 1435 x 50 x 73 | |
| Power | Temperature | Lumens |
| 30W | 4000K | 3600 |
| Angle | Voltage | IP protection |
| 65° | 230V | 20 |
| Detector | Dimensions: | |
| No | LxWxH (mm): 1148 x 50 x 73 | |
| Power | Output voltage | |
| 5W | 12V DC / 0.42 A | |
| Input voltage | IP protection | |
| 110/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 50 x 25 x 21 |
|
Dimensions may vary.
| Power | Output voltage | |
| 40W | 19-38V DC / 1050 mA | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| Yes TRIAC | (L x W x H): 166 x 52 x 25 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 50W | 24V DC / 2.08 A | |
| Input voltage | IP protection | |
| 100/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| Yes Phase break | (L x W x H): 183 x 61 x 32 mm | |
Dimensions may vary.
| Power | Temperature | Lumens |
| 38W | 4000K | 3800 |
| Angle | Voltage | IP protection |
| 120° | 230V | 20 |
| Detector | Dimensions: | |
| Yes | L x W x H (mm): 410 x 410 x 61 | |
Kanlux TYBIA LED is a general lighting luminaire in which SMD diodes are used. Installation of the TYBIA LED luminaire in corridors, stairwells, social or functional areas guarantees substantial savings not only in energy consumption, but also in long-term, maintenance-free operation.
| Power | Temperature | Lumens |
| 38W | 4000K | 3800 |
| Angle | Voltage | IP protection |
| 120° | 230V | 20 |
| Detector | Dimensions: | |
| No | L x W x H (mm): 410 x 410 x 61 | |
Kanlux TYBIA LED is a general lighting luminaire in which SMD diodes are used. Installation of the TYBIA LED luminaire in corridors, stairwells, social or functional areas guarantees substantial savings not only in energy consumption, but also in long-term, maintenance-free operation.
| Power | Temperature | Lumens |
| 38W | 4000K | 3800 |
| Angle | Voltage | IP protection |
| 120° | 230V | 20 |
| Detector | Dimensions: | |
| Yes | L x W x H (mm): 410 x 410 x 61 | |
Kanlux TYBIA LED is a general lighting luminaire in which SMD diodes are used. Installation of the TYBIA LED luminaire in corridors, stairwells, social or functional areas guarantees substantial savings not only in energy consumption, but also in long-term, maintenance-free operation.
| Power | Temperature | Lumens |
| 25W | 4000K | 2600 |
| Angle | Voltage | IP protection |
| 120° | 230V | 20 |
| Detector | Dimensions: | |
| No | L x W x H (mm): 320 x 320 x 65 | |
Kanlux TYBIA LED is a general lighting luminaire in which SMD diodes are used. Installation of the TYBIA LED luminaire in corridors, stairwells, social or functional areas guarantees substantial savings not only in energy consumption, but also in long-term, maintenance-free operation.
| Power | Temperature | Lumens |
| 25W | 4000K | 2600 |
| Angle | Voltage | IP protection |
| 120° | 230V | 20 |
| Detector | Dimensions: | |
| Yes | L x W x H (mm): 320 x 320 x 65 | |
Kanlux TYBIA LED is a general lighting luminaire in which SMD diodes are used. Installation of the TYBIA LED luminaire in corridors, stairwells, social or functional areas guarantees substantial savings not only in energy consumption, but also in long-term, maintenance-free operation.
| Power | Temperature | Lumens |
| 25W | 4000K | 2600 |
| Angle | Voltage | IP protection |
| 120° | 230V | 20 |
| Detector | Dimensions: | |
| Yes | L x W x H (mm): 320 x 320 x 65 | |
Kanlux TYBIA LED is a general lighting luminaire in which SMD diodes are used. Installation of the TYBIA LED luminaire in corridors, stairwells, social or functional areas guarantees substantial savings not only in energy consumption, but also in long-term, maintenance-free operation.
| Power | Voltage | Angle | Dimmable |
| 18W | 230V | 60° | No |
| Temperature | Lumens | ||
| 3000K | 1700 | ||
| Dimensions (Ø x H) | Ø 75 x 205 mm |
| Adjustable | Yes |
| IP rating | 20 |
Kanlux ACORD ATL 1 luminaires are designed for three-phase track mounting and can be adapted to specific requirements. It is possible to choose between a white or black finish, two electrical powers (20W and 30W), colour temperature and light diffusion angle (as standard 60⁰, but it is possible to opt for a reflector for a diffusion angle of 15⁰ or 36⁰) depending on whether you wish to light a general surface or highlight a particular detail. Kanlux ACORD ATL 1 has a life of 50,000 hours with a 5-year guarantee. Fitted with components from recognised brands (LED COB and power supply), combined with a high level of colour rendering (CRI>90) and low glare (UGR
| Power | Voltage | Angle | Dimmable |
| 18W | 230V | 60° | No |
| Temperature | Lumens | ||
| 3000K | 1700 | ||
| Dimensions (Ø x H) | Ø 75 x 205 mm |
| Adjustable | Yes |
| IP rating | 20 |
Kanlux ACORD ATL 1 luminaires are designed for three-phase track mounting and can be adapted to specific requirements. It is possible to choose between a white or black finish, two electrical powers (20W and 30W), colour temperature and light diffusion angle (as standard 60⁰, but it is possible to opt for a reflector for a diffusion angle of 15⁰ or 36⁰) depending on whether you wish to light a general surface or highlight a particular detail. Kanlux ACORD ATL 1 has a life of 50,000 hours with a 5-year guarantee. Fitted with components from recognised brands (LED COB and power supply), combined with a high level of colour rendering (CRI>90) and low glare (UGR
| Power | Voltage | Angle | Dimmable |
| 18W | 230V | 60° | No |
| Temperature | Lumens | ||
| 4000K | 2400 | ||
| Dimensions (Ø x H) | Ø 75 x 205 mm |
| Adjustable | Yes |
| IP rating | 20 |
Kanlux ACORD ATL 1 luminaires are designed for three-phase track mounting and can be adapted to specific requirements. It is possible to choose between a white or black finish, two electrical powers (20W and 30W), colour temperature and light diffusion angle (as standard 60⁰, but it is possible to opt for a reflector for a diffusion angle of 15⁰ or 36⁰) depending on whether you wish to light a general surface or highlight a particular detail. Kanlux ACORD ATL 1 has a life of 50,000 hours with a 5-year guarantee. Fitted with components from recognised brands (LED COB and power supply), combined with a high level of colour rendering (CRI>90) and low glare (UGR
| Power | Voltage | Angle | Dimmable |
| 18W | 230V | 60° | No |
| Temperature | Lumens | ||
| 4000K | 2400 | ||
| Dimensions (Ø x H) | Ø 75 x 205 mm |
| Adjustable | Yes |
| IP rating | 20 |
Kanlux ACORD ATL 1 luminaires are designed for three-phase track mounting and can be adapted to specific requirements. It is possible to choose between a white or black finish, two electrical powers (20W and 30W), colour temperature and light diffusion angle (as standard 60⁰, but it is possible to opt for a reflector for a diffusion angle of 15⁰ or 36⁰) depending on whether you wish to light a general surface or highlight a particular detail. Kanlux ACORD ATL 1 has a life of 50,000 hours with a 5-year guarantee. Fitted with components from recognised brands (LED COB and power supply), combined with a high level of colour rendering (CRI>90) and low glare (UGR
| Power | Voltage | Angle | Dimmable |
| 30W | 230V | 60° | No |
| Temperature | Lumens | ||
| 3000K | 2850 | ||
| Dimensions (Ø x H) | Ø 90 x 205 mm |
| Adjustable | Yes |
| IP rating | 20 |
Kanlux ACORD ATL 1 luminaires are designed for three-phase track mounting and can be adapted to specific requirements. It is possible to choose between a white or black finish, two electrical powers (20W and 30W), colour temperature and light diffusion angle (as standard 60⁰, but it is possible to opt for a reflector for a diffusion angle of 15⁰ or 36⁰) depending on whether you wish to light a general surface or highlight a particular detail. Kanlux ACORD ATL 1 has a life of 50,000 hours with a 5-year guarantee. Fitted with components from recognised brands (LED COB and power supply), combined with a high level of colour rendering (CRI>90) and low glare (UGR
| Power | Voltage | Angle | Dimmable |
| 30W | 230V | 60° | No |
| Temperature | Lumens | ||
| 3000K | 2850 | ||
| Dimensions (Ø x H) | Ø 90 x 205 mm |
| Adjustable | Yes |
| IP rating | 20 |
Kanlux ACORD ATL 1 luminaires are designed for three-phase track mounting and can be adapted to specific requirements. It is possible to choose between a white or black finish, two electrical powers (20W and 30W), colour temperature and light diffusion angle (as standard 60⁰, but it is possible to opt for a reflector for a diffusion angle of 15⁰ or 36⁰) depending on whether you wish to light a general surface or highlight a particular detail. Kanlux ACORD ATL 1 has a life of 50,000 hours with a 5-year guarantee. Fitted with components from recognised brands (LED COB and power supply), combined with a high level of colour rendering (CRI>90) and low glare (UGR
