Availability
Price
Shape
Angle
Detection zone
Brand
Temperature in K or Colour
Power in Watt
Dimmable
Guarantee
Bulb / Holder / Product type
Exterior finish
IP protection
Dimensions
Type of product 2
Detector
DC output voltage
Driver intensity
Subcategories
There are 10 products.
Active filters
Dimensions may vary.
NOT COMPATIBLE WITH 12V DC LED STRIPS OR LED TAPE
| Detector | Detection distance | |
| IR + Twilight | 9 m | |
| Adjustable detector | Angle opening | |
| Yes | 160° | |
| Drilling diameter | Dimensions | |
| Ø 61 mm | (L x W x H): 86 x 86 x 42 mm | |
| IP protection | Voltage | |
| 20 | 220/240V AC |
|
A 24V DC LED power supply is required / controller and remote control not included
Calculate the power supply requirements:
The power output (in W) of your power supply is proportional to the length (in ml).
| Power | Output voltage | |
| 12W | 12V AC / 4.16 A | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| Yes Phase break | (L x W x H): 183 x 61 x 32 |
|
Dimensions may vary.
| Power | Lumens | Voltage | Angle | Dimmable |
| 30W | 3300 | 230 V | 65° | No |
| Downloads available: | ||||
| Technical data sheet here (477.78k) | ||||
Last units on promotionWarning! product guaranteed 3 months, neither recovered nor exchanged.
| Detector | Detection distance | |
| RF + Twilight | 4 to 9 m | |
| Adjustable detector | Angle opening | |
| Yes | 180° | |
| Drilling diameter | Dimensions | |
| Ø 68 mm | (L x W x H): 80 x 80 x 47 mm | |
| IP protection | Voltage | |
| 20 | 220/240V AC |
|
| Detector | Detection distance | |
| IR + Twilight | 6 m | |
| Adjustable detector | Angle opening | |
| Yes | 360° | |
| Drilling diameter | Dimensions | |
| SLOT | (Ø x H): 115 x 24.3 mm |
|
| IP protection | Voltage | |
| 20 | 220/240V AC |
|
| Power | Temperature | Lumens |
| 35W | 2700K / 4000K / 6000K | 2975 / 3360 / 3080 |
| Angle | Voltage | IP protection |
| 24° | 230V | 20 |
| Dimmable | Dimensions: | |
| No | Ø 85mm | |
| Power | Output voltage | |
| 40W | 30 -42V DC / 970mA | |
| Input voltage | IP protection | |
| 180/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 120 X 45 x 30 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
