Availability
Price
Shape
Angle
Detection zone
Ampère
Crossing
Type of products
Bulb(s) included
Brand
Base
Temperature in K or Colour
Power in Watt
Dimmable
Guarantee
Bulb / Holder / Product type
Exterior finish
Power supply
IP protection
Voltage
Dimensions
Length cm
Type of product 2
Detector
Adjustable
Diameter or drill hole
DC output voltage
Driver intensity
Colour
Brands
Materials
Number of light source(s)
Electrical insulation class
Collection
Type of bulb
Subcategories
There are 2097 products.
CCT by colour temperature selection
| Power | Voltage | Angle | Dimmable |
| 21W | 230V | 100° | No |
| Temperature | Lumen | ||
| 3000K / 4000K / 6500K | 2625 / 2785 / 2780 | ||
| Hole diameter | Ø 200 mm |
| Dimensions (ØxH) | Ø 215 x 45 mm |
| Adjustable | No |
| IP protection | 65/20 |
| Power | Lumens | Voltage | Angle | Dimmable |
| 3.5W | 380 Lm | 230V | 38° | No |
| Power | Lumens | Voltage | Angle 120° |
|
| 15 W/m | 960 Lm/m | 24 VDC | ||
| IP protection | Colour temperature | |||
| 20 | RGB+CCT | |||
| Number of LEDs per ml | Dimensions (L x W x H) | |||
| 60 | 5000 x 12 x 3 mm | |||
| Dimmable | Yes | |||
24V DC LED power supply required / controller and remote control not supplied
Calculate your power supply:
The power in W of your power supply is proportional to the length in ml.
Available on 20/07/2025
| Power | Lumens | Voltage | Angle | Dimmable |
| 7W | 806 | 230V | 180° | No |
| Power | Lumens | Voltage | Angle | Dimmable |
| 6.5W | 770 | 230V | 300° | No |
| Power | Lumens | Voltage | Angle | Dimmable |
| 6W | 770 | 230V | 300° | No |
| Power | Lumens | Voltage | Angle | Dimmable |
| 6W | 840 | 230V | 300° | No |
The light fitting is sold without a bulb.
The customer’s visual perception of the sizes, colours, textures, etc. of our products may be affected by factors such as ambient light, screen calibration, viewing angle or the device used by each customer. Customers should bear in mind that the cost of returns made for reasons not related to the product’s functionality will be borne by the customer.
The light fitting is sold without a bulb.
The customer’s visual perception of the sizes, colours, textures, etc. of our products may be affected by factors such as ambient light, screen calibration, viewing angle or the device used by each customer. Customers should bear in mind that the cost of returns made for reasons unrelated to the product’s functionality will be borne by the customer.
| Power | Lumens | Voltage | Angle | Dimmable |
| 6W | 840 | 230V | 300° | No |
The 73884 has been replaced by this product
| Power | Temperature | Lumens |
| 30-50W | 4000K | 4200 Lm (30W) / 7000 Lm (50W) |
| Angle | Voltage | IP rating |
| 120° | 230V | 65 |
| Detector | Dimensions: | |
| Yes | (L x W x H): 1520 x 85 x 80 mm |
|
| Power | Temperature | Lumens |
| 18-30W | 4000K | 2850 Lm (19W) / 4500 Lm (30W) |
| Angle | Voltage | IP rating |
| 120° | 230V | 65 |
| Detector | Dimensions: | |
| Yes | (L x W x H): 1220 x 85 x 80 mm |
|
| Power | Lumens | Voltage | Angle 120° |
|
| 10 W/m | 1100 Lm/m | 220 VAC | ||
| IP protection | Colour temperature | |||
| 65 | 4000 K | |||
| Number of leds per ml | Dimensions (L x W x H) | |||
| 110 | 1000 x 10 x 3 mm | |||
| Dimmable | No |
|||
Can be cut every 10 cm
REF: LM2615 MUST BE ADDED FOR A LENGTH (MAX 50ML).
220V AC direct supply, no rectifier system.
| Power | Lumens | Voltage | Angle 120° |
|
| 10 W/m | 1100 Lm/m | 220 VAC | ||
| IP protection | Colour temperature | |||
| 65 | 4000 K | |||
| Number of leds per ml | Dimensions (L x W x H) | |||
| 110 | 50000 x 10 x 3 mm | |||
| Dimmable | No |
|||
Can be cut every 10 cm
220V AC direct supply, without rectifier system.
| Power | Lumens | Voltage | Angle 120° |
|
| 10 W/m | 1100 Lm/m | 220 VAC | ||
| IP protection | Colour temperature | |||
| 65 | 2700 K | |||
| Number of leds per ml | Dimensions (L x W x H) | |||
| 110 | 50000 x 10 x 3 mm | |||
| Dimmable | No |
|||
Can be cut every 10 cm
220V AC direct supply, without rectifier system.
| Power | Lumens | Voltage | Angle 120° |
|
| 10 W/m | 1100 Lm/m | 220 VAC | ||
| IP protection | Colour temperature | |||
| 65 | 2100 K | |||
| Number of LEDs per ml | Dimensions (L x W x H) | |||
| 110 | 50000 x 10 x 3 mm | |||
| Dimmable | No |
|||
Can be cut every 10 cm
220V AC direct supply, without rectifier system.
| Power | Lumens | Voltage | Angle 120° |
|
| 10 W/m | 1100 Lm/m | 220 VAC | ||
| IP protection | Colour temperature | |||
| 65 | 6000 K | |||
| Number of leds per ml | Dimensions (L x W x H) | |||
| 110 | 50000 x 10 x 3 mm | |||
| Dimmable | No |
|||
Can be cut every 10 cm
220V AC direct supply, without rectifier system.
| Power | Lumens | Voltage | Angle 120° |
|
| 10 W/m | 1100 Lm/m | 220 VAC | ||
| IP protection | Colour temperature | |||
| 65 | 2700 K | |||
| Number of leds per ml | Dimensions (L x W x H) | |||
| 110 | 1000 x 10 x 3 mm | |||
| Dimmable | No |
|||
Can be cut every 10 cm
REF: LM2615 MUST BE ADDED FOR A LENGTH (MAX 50ML).
220V AC direct supply, no rectifier system.
| Power | Lumens | Voltage | Angle 120° |
|
| 10 W/m | 1100 Lm/m | 220 VAC | ||
| IP protection | Colour temperature | |||
| 65 | 2100 K | |||
| Number of LEDs per ml | Dimensions (L x W x H) | |||
| 110 | 1000 x 10 x 3 mm | |||
| Dimmable | No |
|||
Can be cut every 10 cm
REF: LM2615 MUST BE ADDED FOR A LENGTH (MAX 50ML).
220V AC direct supply, no rectifier system.
| Power | Lumens | Voltage | Angle 120° |
|
| 10 W/m | 1100 Lm/m | 220 VAC | ||
| IP protection | Colour temperature | |||
| 65 | 6000 K | |||
| Number of leds per ml | Dimensions (L x W x H) | |||
| 110 | 1000 x 10 x 3 mm | |||
| Dimmable | No |
|||
Can be cut every 10 cm
REF: LM2615 MUST BE ADDED FOR A LENGTH (MAX 50ML).
220V AC direct supply, no rectifier system.
Led ribbon power supply for 230v led ribbon
Compatible with Cobpro and Cobpoint
| Power | Output voltage | |
| 30W | 27-40V DC / 700 mA | |
| Input voltage | IP protection | |
| 100/277V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| Yes 0-10V | (L x W x H): 145 x 43 x 29 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 5-14W | 25-42V DC / 200-350 mA | |
| Input voltage | IP protection | |
| 220-240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| Yes Triac | (L x W x H): 121.9 x 39.9 x 25 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 40W | 28-40V DC / 1000 mA | |
| Input voltage | IP protection | |
| 180-264V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 119 x 42 x 28 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 60W | 28-42V DC / 1500 mA | |
| Input voltage | IP protection | |
| 200-240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 156 x 50 x 32 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
Flat Electrical Cable Sheath 4X0.25Mm² For Rgb Led Ribbons - 500 Metres
Flat Electrical Cable Sheath 2X0.5Mm² For Single Colour Led Ribbons - 500 Metres
Flat Oxygen Electrical Cable Sheath 2X0.5Mm² For Single-Colour Led Ribbons - 500 Metres
| Power | Lumens | Voltage | Angle | Dimmable |
| 6W | 520 | 12 VDC | 38° | No |
| Power | Lumens | Voltage | Angle | Dimmable |
| 10W | 1150 | 230V | 180° | No |
The 73886 is replaced by this product
The luminaire is sold without an E27 bulb.
The elegant ceiling lights in the Horus collection have been designed for modern interiors and avant-garde homes. The elegant ceiling and suspended luminaires in this series are characterised by their simple, tasteful lines and original shapes. The great advantage of the HORUS collection is its versatility - the lamps shown fit in perfectly with modernist, Scandinavian, loft or modern interiors. Excellent quality and an unrivalled effect for the most demanding customers.
The luminaire is sold without an E27 bulb.
The elegant ceiling lights in the Horus collection have been designed for modern interiors and avant-garde homes. The elegant ceiling and suspended luminaires in this series are characterised by their simple, tasteful lines and original shapes. The great advantage of the HORUS collection is its versatility - the lamps shown fit in perfectly with modernist, Scandinavian, loft or modern interiors. Excellent quality and an unrivalled effect for the most demanding customers.
| Power | Output voltage | |
| 12-20 * 1W | 36-68V DC / 300 mA | |
| Input voltage | IP protection | |
| 85/277V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 70 x 34 x 26 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Lumens | Voltage | Angle | Dimmable |
| 7W | 806 | 230V | 180° | No |
The 7453 is replaced by this product
| Power | Temperature | Lumens |
| 20W | 3000K / 4000K / 6000K | 2100 / 2000 / 2100 |
| Angle | Voltage | Protection IP |
| 120/90° | 230V | 65 |
| Detector | Dimensions: | |
| No | Ø x H (mm): Ø 300 x 90 | |
