Availability
Price
Shape
Angle
Detection zone
Ampère
Brand
Base
Temperature in K or Colour
Power in Watt
Dimmable
Guarantee
Bulb / Holder / Product type
Exterior finish
Power supply
IP protection
Dimensions
Length cm
Type of product 2
Detector
Adjustable
Diameter or drill hole
DC output voltage
Driver intensity
Colour
Subcategories
There are 162 products.
The light fitting is sold without a G9 bulb.
| Power | Lumens | Voltage | Angle | Dimmable |
| 30W | 3300 | 230 V | 65° | No |
| Downloads available: | ||||
| Technical data sheet here (477.78k) | ||||
Last units on promotionWarning! product guaranteed 3 months, neither recovered nor exchanged.
| Detector | Detection distance | |
| RF + Twilight | 4 to 9 m | |
| Adjustable detector | Angle opening | |
| Yes | 180° | |
| Drilling diameter | Dimensions | |
| Ø 68 mm | (L x W x H): 80 x 80 x 47 mm | |
| IP protection | Voltage | |
| 20 | 220/240V AC |
|
| Detector | Detection distance | |
| IR + Twilight | 6 m | |
| Adjustable detector | Angle opening | |
| Yes | 360° | |
| Drilling diameter | Dimensions | |
| SLOT | (Ø x H): 115 x 24.3 mm |
|
| IP protection | Voltage | |
| 20 | 220/240V AC |
|
Bulb and bulb socket not included.
Bulb not included.
| Dimensions (ØxH) | Ø 85 x 115 mm |
| Adjustable | Yes |
| IP rating | 20 |
Non-replaceable lithium battery
Bulb and bulb holder not included.
| Hole diameter | Ø 78 mm |
| Dimensions (ØxH) | Ø 58 mm |
| Adjustable | No |
| IP protection | 20 |
| Power | Temperature | Lumens |
| 35W | 2700K / 4000K / 6000K | 2975 / 3360 / 3080 |
| Angle | Voltage | IP protection |
| 24° | 230V | 20 |
| Dimmable | Dimensions: | |
| No | Ø 85mm | |
Bulb not included.
| Dimensions (ØxH) | Ø 85 x 115 mm |
| Adjustable | No |
| IP rating | 20 |
A 12V DC LED power supply is required / controller and remote control not included
Calculate the power rating for your power supply:
The power output (in W) of your power supply is proportional to the length (in ml).
Ballast insulation is mandatory
| Power | Lumens | Voltage | Angle 120° |
|
| 9 W/m | 960 Lm/m | 12 VDC | ||
| IP protection | Colour temperature | |||
| 20 | 4000 K | |||
| Number of LEDs per ml | Dimensions (L x W x H) | |||
| 60 | 5000 x 10 x 1.5 mm | |||
| Dimmable | Yes | |||
12V DC LED power supply required / controller and remote control not supplied
Calculate your power supply:
The power in W of your power supply is proportional to the length in ml.
| Power | Lumens | Voltage | Angle 120° |
|
| 9 W/m | 960 Lm/m | 12 VDC | ||
| IP protection | Colour temperature | |||
| 20 | RGB | |||
| Number of LEDs per ml | Dimensions (L x W x H) | |||
| 60 | 5000 x 10 x 1.5 mm | |||
| Dimmable | Yes | |||
12V DC LED power supply required / controller and remote control not supplied
Calculate your power supply:
The power in W of your power supply is proportional to the length in ml.
| Power | Lumens | Voltage | Angle 120° |
|
| 9 W/m | 960 Lm/m | 12 VDC | ||
| IP protection | Colour temperature | |||
| 20 | RGB+W | |||
| Number of LEDs per ml | Dimensions (L x W x H) | |||
| 60 | 5000 x 10 x 1.5 mm | |||
| Dimmable | Yes | |||
12V DC LED power supply required / controller and remote control not supplied
Calculate your power supply:
The power in W of your power supply is proportional to the length in ml.
Bulb and bulb holder not included.
| Hole diameter | Ø 157 x 80 mm |
| Dimensions (LxW) | Ø 175 x 93 mm |
| Adjustable | Yes |
| IP rating | 20 |
| Power | Output voltage | |
| 13-36W | 3-66V DC / 200-1050 mA | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| DALI or PUSH or 0-10V | (L x W x H): 168 x 39 x 30 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Lumens | Voltage | Angle | Dimmable |
| 9W | 820 | 230 V | 360° | No |
| Power | Lumens | Voltage | Angle | Dimmable |
| 6W | 650 | 230 V | 300° | No |
| Detector | Detection distance | |
| RF + Twilight | 6 x 10 m | |
| Adjustable detector | Angle opening | |
| Yes | 360° | |
| Drilling diameter | Dimensions | |
| Ø 55 mm | (Ø x H): Ø 72 x 75 mm |
|
| IP protection | Voltage | |
| 20 | 220/240V AC |
|
Bulb and bulb holder not included.
| Hole diameter | Ø 240 x 80 mm |
| Dimensions (LxW) | Ø 258 x 93 mm |
| Adjustable | Yes |
| IP rating | 20 |
Bulb and bulb holder not included.
| Hole diameter | Ø 72 mm |
| Dimensions (ØxH) | Ø 83 x 74 mm |
| Adjustable | No |
| IP protection | 20 |
Bulb and bulb holder not included.
| Hole diameter | Ø 72 mm |
| Dimensions (ØxH) | Ø 82 x 64 mm |
| Adjustable | Yes |
| IP rating | 20 |
Bulb and bulb holder not included.
| Hole diameter | Ø 75 mm |
| Dimensions (ØxH) | Ø 85 x 47 mm |
| Adjustable | Yes |
| IP rating | 20 |
| Power | Output voltage | |
| 10W | 12V DC 0.85A | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 100 x 39 x 20 |
|
Dimensions may vary.
| Power | Output voltage | |
| 43W | 21-70V DC / 350-1050mA | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| Yes DALI2 / PUSH | (L x W x H): 135 x 72 x 25 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 45W | 14-43V DC / 1050-1600mA | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| Yes DALI PUSH | (L x W x H): 140 x 75 x 25 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
