Electrical accessories & LED drivers

Supply voltage: 110-250 V AC 50/60 Hz
Maximum load: 10 A
Maximum power: 2,500 W
Overvoltage protection: 1,500 V
Number of 230 V sockets: 5
Protection level: IP22
Cable marking: H05VV-F, 3X1.0 mm2,
sheath 0.2 mm Cable material: PVC
Housing material: ABS
Length: 2.0 [m]:
Switch: Yes, for each socket separately

Digital daily/weekly clock with LCD display ideal for swimming pool treatment plants, irrigation, etc.

Ready for DIN rail installation, it has a 230V AC power supply, 16 A / 250V AC switching capacity, maximum recommended load of 2000W, minimum interval of 1 minute and open contact (NO).

It supports up to 16 different programmes per day or week with a maximum of 18 steps per programme and pulses from 1 minute to 1 hour. It counts down from 100 minutes and has a 15-day reserve and a connection cable capacity of up to 2.5 mm².

Complies with international standards EN / IEC60730-1 and CE & RoHS certificates.

* Caution: When using for the first time, you must press the "RESET" button to switch the display on.

Last units on promotion

Attention! product guaranteed 3 months, neither recovered nor exchanged.

Data sheet here (476.17k)

leaflet (522.59k)

• Wire Ø dimensions from 0.2 to 4 mm²

• Dimensions (L x W x H): 18 x 18 x 9.5 mm

• Voltage: 32A / 450V max

• IP20 protection

• • • Connector: 3-wire Flexible, rigid, semi-rigid cable

• Packaging: Box of 50

• Dimensions Ø 0.5 to 2.5 mm² wires

• Dimensions (L x W x H): 17.5 x 15 x 8 mm

  • Voltage: 24A / 250V max

  • IP20 protection

    • Connector: 3 rigid wires

  • Packaging: Box of 100

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Last units on promotion

Warning! product guaranteed 3 months, neither recovered nor exchanged.

Data sheet here (388.95k)

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Kanlux SLICK JQ is a motion sensor with a maximum motion detection range of 12 m. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Sometimes small ideas make all the difference: this is the case with the Schuko plug with pull-out ring, which makes it easier and safer to connect and disconnect the plug from a socket.
What's more, the Schuko comfort plug can be fitted and removed with just one screw, simplifying wiring operations.

Simple switch with RF remote control that lets you switch a luminaire on or off remotely.

Controller dimensions: 80x34x19 mm.
Remote control dimensions: 40x96x20 mm.

• Base: S14d

• Dimensions (W x D x H): 32 x 28 x 52 mm

Lithium battery Non-replaceable

• Dimensions (Ø x H): Ø 45 x 42 mm

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

• Finish: gloss black
• Dimensions (Ø x H): Ø 100 x 18 mm

• Last units on sale

  Please note: product guaranteed for 3 months, no returns or exchanges.

• Finish: White
• Dimensions (L x W x H): 500 x 50 x 20 mm

Last units on sale

• Warning! product guaranteed 3 months, neither recovered nor exchanged.

• Finish: Black
• Dimensions (L x W x H): 500 x 50 x 20 mm

Last units on sale

• Attention! product guaranteed 3 months, neither recovered nor exchanged.

Complete 3-hole Rose-One System kit comprising a 120 mm rosette with a 200 mm round metal decorative cover and all the fixing accessories.

This kit contains cable ties specially designed not to hide the decor thanks to their flat shape and transparent colour.

Perfect for lighting large rooms and multi-suspension ceiling lights, this system will suit all types of interiors thanks to our wide selection of designs. Choose the one you prefer from the menu.

ATTENTION: the accessories for connecting the rose to the power line are NOT included in the kit, but can be purchased separately.

• Finish: White

• Dimensions (Ø x H): Ø 120 x 35 mm

• Round cover Ø 200 mm

The advantages of an LED ribbon anti-flicker rectifier are as follows:

Improved visibility: The anti-flicker rectifier eliminates flicker and variations in brightness, making the LED ribbon more visible and pleasant to look at.

Reduced eye fatigue: Flicker can cause eye fatigue, particularly with prolonged use. The anti-flicker rectifier can help reduce eye fatigue and improve visual comfort.

Longer life: Flicker can accelerate wear on LEDs, reducing their life. The anti-flicker rectifier can help extend LED life.

The flicker rectifier works by converting alternating current (AC) into direct current (DC). Direct current is more stable than alternating current, eliminating flicker and variations in brightness.

• Dimensions (L x W x H): 133 x 35 x 32 mm
• Voltage: 230V 50/60HZ
• IP67 protection

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

A highly sensitive microwave sensor with adjustable parameters (illumination time, activation threshold and detection distance).

• Dimensions (L x W x H): 127 x 75 x 35 mm

Supply voltage: 110-250V AC 50/60Hz
Maximum load: 10A
Maximum power: 2500W
Overvoltage protection: 1500V
Number of 230V sockets: 5
Type of sockets: Schuko
Number of USB 5V 2A sockets: 4x USB-A + 1x USB-C
Protection level: IP22
Cable marking: H05VV-F, 3X1.0 mm2, 0.2 mm
Cable sheath material: PVC
Housing material: ABS
Length: 2.0 [m]:
Switch: Yes, for each socket separately

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED Driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED Driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

• Dimensions (L x W x H): 83 x 83 x 45 mm
• Voltage: 220/240V AC
• IP protection: 20

Data sheet here (360.08k)

leaflet (294.32k)

Last units on promotion

Attention! product guaranteed 3 months, neither recovered nor exchanged.

• Dimensions Ø 0.5 to 2.5 mm² wires

• Dimensions (L x W x H): 17.5 x 15 x 8 mm

  • Voltage: 24A / 250V max

  • IP20 protection

    • Connector: 3 rigid wires

  • Packaging: Box of 20

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

• Last units on promotion

  Warning! product guaranteed 3 months, neither recovered nor exchanged.

• Dimensions (L x W x H): 9x260x1.8 mm

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

• Base: B22

• Dimensions (Ø x H): Ø 40 x 65 mm

• Characteristics: Adapter to E27

• Last units on sale

  Attention! product guaranteed 3 months, neither recovered nor exchanged.

• Dimensions:
• Height (mm): 130
• Width (mm) : 60
• Length (mm): 86
• Number of modules: 4

DB series switching devices, which meet the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, solid walls made of non-combustible materials). They may not be used on flammable surfaces (e.g. plasterboard, wood, etc.), hollow walls or electrical conduits.

Dimensions Ø 0.5 to 2.5 mm² wires

Dimensions (Ø x L): Ø30 x 95 mm

Voltage: 16A / 450V max

IP68 protection

Connector: 3 wires Flexible, rigid, semi-rigid cable

Data sheet here (415.46k)

leaflet (2.62M)

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Complete 3-hole Rose-One System kit comprising a 120 mm rosette with a 200 mm round metal decorative cover and all the fixing accessories.

This kit contains cable ties specially designed not to hide the decor thanks to their flat shape and transparent colour.

Perfect for lighting large rooms and multi-suspension ceiling lights, this system will suit all types of interiors thanks to our wide selection of designs. Choose the one you prefer from the menu.

ATTENTION: the accessories for connecting the rose to the power line are NOT included in the kit, but can be purchased separately.

• Finish: Black

• Dimensions (Ø x H): Ø 120 x 35 mm

• Round cover Ø 200 mm

The 3W LED Emergency Beacon has a highly waterproof casing and an IP65 protection rating, making it highly resistant to the elements, so it can be installed both indoors and outdoors. It has protective fuses and a battery with a runtime of up to 3 hours. Its integrated LEDs provide high efficiency, durability and excellent performance.

The LED Emergency Beacon provides both permanent and non-permanent lighting. This emergency light is pre-configured as a non-permanent light. By changing the position of the PCB connector, you can select the permanent operating mode.

The 3W LED Emergency Beacon is the most practical, economical and simple solution in the event of a power failure. It is easy to install on both walls and ceilings. It can also be surface-mounted, thanks to the part it incorporates that adapts to the luminaire.

* LED operating indicator.

* For the emergency lighting to work properly, you need to connect the battery pre-wiring.