List of products by brand Discount-led

The luminaire is sold without an E27 bulb.

• Last units in promotion

  Attention! product guaranteed 3 months, neither recovered nor exchanged.

Dimensions may vary.

Last units on promotion

Warning! 3 months warranty, no returns or exchanges.

These transformers are suitable for all low-voltage halogen bulbs, but are not suitable for LED bulbs and LED ribbon.

Dimensions may vary.

*Stable performance: no flickering after connection, good anti-interference. The casing is made of plastic to protect it from dust and moisture.
*Safety: no transformer noise, insulated end cover. The protective device is equipped with overload protection, overvoltage protection, short-circuit protection and overheating protection.
*Small and flat: with dimensions of 42 x 40 x 20 mm, it is small and can be easily installed in any room without compromising appearance. Inputs and outputs are clearly marked for easy electrical connection.
*Easy connection: simple connections via screw terminals allow easy replacement of existing transformers.
* Wide application: suitable for a variety of low voltage 12 V LED applications, including LED strip lights, doorbells, cabinet lights, LED displays.

This twilight sensor is compatible with luminaires fitted with 1-10V dimmable drivers. Its progressive operating mode increases and decreases the light from the luminaires in relation to the preset light level in the room (it has a dimmer that changes its intensity in relation to the ambient light). As a result, the Photoelectric Sensor / Mini Twilight 1-10V increases the intensity of the luminaires when the ambient light decreases and conversely, if the ambient light increases, the sensor reduces the intensity of the luminaires, thus ensuring that the lighting is always adequate and efficient.

This type of device allows you to maximise the efficiency of the lighting system, as you take advantage of the natural light available at all times. A very interesting option is to combine the Photoelectric Sensor / Mini Twilight 1-10V with a presence detector to fully automate the operation of the luminaire.

This product includes 70 cm of wiring and can be installed either flush-mounted or surface-mounted.

* Compatible with 1-10V dimmable drivers.

This 92x92x42mm Universal Surface-Mounted Box allows you to install flush-mounted switchgear without drilling holes in the wall.

Made from halogen-free polycarbonate (PC), this universal box is highly resistant and has pre-cut entrances for tubes, cables and trunking. Thanks to its dimensions, you can install standard-sized switchgear, so it's compatible with the majority of flush-mounted switchgear series on the market.

The 92x92x42 mm Universal Surface-mounted Box for Apparatus is generally used for indoor installations, normally exposed, of shielded tubes or trunking. A product that will certainly fulfil its purpose and allow you to add sockets or switches to any surface, for example.

* Fixing screws included.

The Double-Sided LED Emergency Lighting Sign is a practical and effective way of indicating exits, directions or the location of toilets, etc...

Fitted with a 3.6V 800mAh Ni-Cd battery with a life of up to 3 hours. The LED Emergency Signage Kit has an LED light bracket that offers great energy savings and excellent performance. The lighting on this LED Emergency Lighting Sign allows you to use both sides of the sign independently thanks to the LED light distribution of the design.

Its innovative design makes for easy installation, with 4 types of installation possible: hanging, recessed, wall-mounted in side mode and wall-mounted in front mode. You can choose the signage (exit, right orientation, left orientation, up orientation, down orientation and WC).

Without a doubt, theLED Emergency Lighting Sign we offer on our online lighting site is a key element of any emergency lighting system.

* Permanent lighting.

Digital daily/weekly clock with LCD display ideal for swimming pool treatment plants, irrigation, etc.

Ready for DIN rail installation, it has a 230V AC power supply, 16 A / 250V AC switching capacity, maximum recommended load of 2000W, minimum interval of 1 minute and open contact (NO).

It supports up to 16 different programmes per day or week with a maximum of 18 steps per programme and pulses from 1 minute to 1 hour. It counts down from 100 minutes and has a 15-day reserve and a connection cable capacity of up to 2.5 mm².

Complies with international standards EN / IEC60730-1 and CE & RoHS certificates.

* Caution: When using for the first time, you must press the "RESET" button to switch the display on.

Last units on promotion

Attention! product guaranteed 3 months, neither recovered nor exchanged.

The Gauss LED wall light is undoubtedly a highly decorative and versatile element that adapts to all styles. This wall light includes a USB charger so you'll never be without a battery again.

Last units on promotion

Attention! product guaranteed 3 months, neither recovered nor exchanged.

The Gauss LED wall light is undoubtedly a highly decorative and versatile element that adapts to all styles. This wall light includes a USB charger so you'll never be without a battery again.

12V DC LED power supply required / controller and remote control not supplied

Calculate your power supply:

The power in W of your power supply is proportional to the length in ml.

• Compatible with: 3-light rail

• Dimensions

• Height (mm): 36

• Width (mm) : 32

• Length (mm): 2000

• Voltage: 220/240V AC - 16A max

• IP protection: 20

A dimmable LED bulb requires a carefully designed dimmer.

Connecting an LED bulb to a traditional dimmer often results in irregular operation, flickering light and a high risk of burning out the bulb.

Our button dimmer, on the other hand, has been designed for all types of bulb: traditional filament, energy-saving, dimmable and dimmable LED.

Designed and produced 100% in Italy, the LED dimmer with knob will allow you to regulate the intensity of light more comfortably and safely.

Download installation instructions (412.04k)

A dimmable LED bulb requires a carefully designed dimmer.

Connecting an LED bulb to a traditional dimmer often results in irregular operation, flickering light and a high risk of burning out the bulb.

Our button dimmer, on the other hand, has been designed for all types of bulb: traditional filament, energy-saving, dimmable and dimmable LED.

Designed and produced 100% in Italy, the LED dimmer with knob will allow you to regulate the intensity of light more comfortably and safely.

Download installation instructions (412.04k)

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

• Last units on promotion

  Attention! product guaranteed 3 months, neither recovered nor exchanged.

The luminaire is sold without an E27 bulb.

• Last units in promotion

  Attention! product guaranteed 3 months, neither recovered nor exchanged.

24V DC LED power supply required / controller and remote control not supplied

Calculate your power supply:

The power in W of your power supply is proportional to the length in ml.

The luminaire is sold without a bulb.

The Kathu Manyoya Rattan Pendant combines a unique, elegant design with high-quality finishes. This type of designer lamp lets you add that natural touch that will bring personality to any space, making it unique.

The luminaire is sold without a bulb.

The Koni Rattan Pendant combines a unique, elegant design with high-quality finishes. With this type of designer lamp, you can add a touch of colour and personality to any space, making it unique.

The luminaire is sold without a bulb.

The IPapier Tressé largia pendant combines a unique, elegant design with high-quality finishes. With this type of designer lamp, you can add a touch of colour and personality to any space, making it unique.

The luminaire is sold without a bulb.

The Kahawa Metal Pendant combines a unique, elegant design with high-quality finishes. With this type of designer lamp, you can add a touch of colour and personality to any space, making it unique.

The luminaire is sold without a bulb.

The Pusaka Metal Pendant combines a unique, elegant design with high-quality finishes. This type of designer lamp lets you add that elegant touch that will bring personality to any space, making it unique.

CCT by colour temperature selection

The Ivalo 20W Metal LED Pendant CCT is the perfect option for adding that extra touch to your space. Made from aluminium, this lamp has a modern, minimalist design. It has a light output of 85lm/W and an aperture angle of 120º. It is also equipped with a dimming system CCT, allowing you to choose the colour temperature between warm white, neutral white and cool white. With its elegant, modern, minimalist and sophisticated look, it becomes a design creation that will fit in perfectly with the style and room you are trying to decorate. You can place it in a wide range of spaces, such as dining rooms, kitchens, bedrooms, hotel corridors, shops, etc.

Suspended aluminium lamp with a modern design of interlaced figures.

It has an integrated LED luminaire that diffuses a strong, even light with a total power of 50W and a luminous intensity of 3200 lumens.

This lamp brings a unique and elegant style to any interior.

Suspended aluminium lamp with a modern design of interlaced figures.

It has an integrated LED luminaire that diffuses a strong, even light with a total power of 50W and a luminous intensity of 3200 lumens.

This lamp brings a unique and elegant style to any interior.

CCT by colour temperature selection

The Big Ivalo 28W Metal LED Pendant CCT is the perfect option for adding that extra touch to your space. Made from aluminium, this lamp has a modern, minimalist design. It has a light output of 85 lm/W and an aperture angle of 120º. It is also equipped with a dimming system CCT. With its elegant, modern, minimalist and sophisticated look, it is a design creation that will fit in perfectly with the style and room you are trying to decorate. You can place it in a wide range of spaces, including dining rooms, kitchens, bedrooms, hotel corridors, shops, etc.

It will take approximately 3 to 7 weeks to receive the product ordered.

Light source colour: warm white: 2800-3200K, cool white: 6000-6500K. Neutral light is 4000-4500K;
Dimmable remote control has warm white and cool white colour and you can change the colour and decrease the brightness by remote control

The Contactless Detection Switch for Cabinet Doors allows any light in a cabinet to be switched on without the need for a wall switch.

Features of the Contactless Detection Switch for Cabinet Doors

The Contactless Detection Switch for Cabinet Doors detects when the door is opened by switching on the light to which it is connected. This light will remain on until the sensor detects that the door is closed, at which point the light will be switched off. The sensor's angle of detection is 90°.

Applications of the Contactless Detection Switch for Cabinet Doors

The Contactless Detection Switch for Cabinet Doors is the perfect solution for illuminating your tool cabinets, wardrobes and kitchen cupboards, making it easier to see and select what you need.