Home

The 3W LED Emergency Beacon has a highly waterproof casing and an IP65 protection rating, making it highly resistant to the elements, so it can be installed both indoors and outdoors. It has protective fuses and a battery with a runtime of up to 3 hours. Its integrated LEDs provide high efficiency, durability and excellent performance.

The LED Emergency Beacon provides both permanent and non-permanent lighting. This emergency light is pre-configured as a non-permanent light. By changing the position of the PCB connector, you can select the permanent operating mode.

The 3W LED Emergency Beacon is the most practical, economical and simple solution in the event of a power failure. It is easy to install on both walls and ceilings. It can also be surface-mounted, thanks to the part it incorporates that adapts to the luminaire.

* LED operating indicator.

* For the emergency lighting to work properly, you need to connect the battery pre-wiring.

• • Can be cut every 10 cm

    REF: LM2615 MUST BE ADDED FOR A LENGTH (MAX 50ML).

    220V AC direct supply, no rectifier system.

  • Can be welded in the workshop with ref: LM0004

• • Can be cut every 10 cm

    220V AC direct supply, without rectifier system.

• • Can be cut every 10 cm

    220V AC direct supply, without rectifier system.

• • Can be cut every 10 cm

    220V AC direct supply, without rectifier system.

• • Can be cut every 10 cm

    220V AC direct supply, without rectifier system.

• • Can be cut every 10 cm

    REF: LM2615 MUST BE ADDED FOR A LENGTH (MAX 50ML).

    220V AC direct supply, no rectifier system.

  • Can be welded in the workshop with ref: LM0004

• • Can be cut every 10 cm

    REF: LM2615 MUST BE ADDED FOR A LENGTH (MAX 50ML).

    220V AC direct supply, no rectifier system.

  • Can be welded in the workshop with ref: LM0004

• • Can be cut every 10 cm

    REF: LM2615 MUST BE ADDED FOR A LENGTH (MAX 50ML).

    220V AC direct supply, no rectifier system.

  • Can be welded in the workshop with ref: LM0004