Availability
Price
Brand
Temperature in K or Colour
Power in Watt
Dimmable
Guarantee
Bulb / Holder / Product type
IP protection
Voltage
Type of product 2
DC output voltage
Driver intensity
Subcategories
There are 4 products.
The 3W LED Emergency Beacon has a highly waterproof casing and an IP65 protection rating, making it highly resistant to the elements, so it can be installed both indoors and outdoors. It has protective fuses and a battery with a runtime of up to 3 hours. Its integrated LEDs provide high efficiency, durability and excellent performance.
The LED Emergency Beacon provides both permanent and non-permanent lighting. This emergency light is pre-configured as a non-permanent light. By changing the position of the PCB connector, you can select the permanent operating mode.
The 3W LED Emergency Beacon is the most practical, economical and simple solution in the event of a power failure. It is easy to install on both walls and ceilings. It can also be surface-mounted, thanks to the part it incorporates that adapts to the luminaire.
* LED operating indicator.
* For the emergency lighting to work properly, you need to connect the battery pre-wiring.
24V DC LED power supply required / controller and remote control not supplied
Calculate the power supply requirements:
The power rating (in W) of your power supply is proportional to the length (in ml).
| Power | Output voltage | |
| 80W | 20-35V DC / 2400mA | |
| Input voltage | IP protection | |
| 110/240V 50/60Hz | 67 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 152 x 51 x 40 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms AC mains current into DC current to light up the LED chips.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 100W | 20-35V DC / 3000mA | |
| Input voltage | IP protection | |
| 110/240V 50/60Hz | 67 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 152 x 57 x 40 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms AC mains current into DC current to light up the LED chips.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
