Availability
Price
Shape
Brand
Base
Temperature in K or Colour
Power in Watt
Dimmable
Guarantee
Bulb / Holder / Product type
Exterior finish
IP protection
Length cm
Type of product 2
Diameter or drill hole
DC output voltage
Driver intensity
Subcategories
There are 5 products.
It is recommended that you read the instructions carefully before proceeding with the installation.
Phase and neutral on the same side.
Also works with a fitting containing a ferromagnetic ballast if the starter supplied with our tube is fitted
Not suitable for electromagnetic ballasts without a starter
Starter included
Dimensions may vary.
| Power | Output voltage | |
| 24W Max. | 18-42V DC / 300mA | |
| Input voltage | IP protection | |
| 85/277V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| Yes 0-10V | (L x W x H): 96 x 36 x 25 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Lumens | Voltage | Angle | IP |
| 24W | 1900 | 230V | 120° | 20 |
Last units on promotionAttention! product guaranteed 3 months, neither recovered nor exchanged
CCT by colour temperature selection
| Power | Voltage | Angle | Dimmable |
| 24W | 230V | 120° | Yes |
| Temperature | Lumen | ||
| 3000K / 4000K / 6000K | 2100 / 2280 / 2200 | ||
| Hole diameter | Ø 280 mm |
| Dimensions (ØxH) | Ø 300 x 22 mm |
| Adjustable | No |
| IP protection | 40/20 |
