Availability
Price
Shape
Angle
Detection zone
Ampère
Type of products
Bulb(s) included
Brand
Base
Temperature in K or Colour
Power in Watt
Dimmable
Guarantee
Bulb / Holder / Product type
Exterior finish
Power supply
IP protection
Voltage
Dimensions
Length cm
Type of product 2
Detector
Adjustable
Diameter or drill hole
DC output voltage
Driver intensity
Colour
Brands
Materials
Number of light source(s)
Electrical insulation class
Collection
Type of bulb
Subcategories
There are 821 products.
Active filters
| Power | Lumens | Voltage | Angle 120° |
|
| 9 W/m | 960 Lm/m | 12 VDC | ||
| IP protection | Colour temperature | |||
| 20 | RGB | |||
| Number of LEDs per ml | Dimensions (L x W x H) | |||
| 60 | 5000 x 10 x 1.5 mm | |||
| Dimmable | Yes | |||
12V DC LED power supply required / controller and remote control not supplied
Calculate your power supply:
The power in W of your power supply is proportional to the length in ml.
| Power | Lumens | Voltage | Angle | Dimmable |
| 9W | 960 | 230V | 220° | Yes remote control |
| Downloads available : | ||||
| Manual | ||||
Sold individually - remote control not included
| Remote control | Batteries | Voltage | Control | |
| 1 zone | 2xAAA | 3V | 30 m | |
| Total output | Output | Voltage | Control | |
| 10A | 6A/channel | 12-24VDC | 30 m | |
| Downloads available : | ||||
| manual | ||||
Sold individually - Batteries not included.
Voltage: 220-240V AC
Maximum power: 150 W
IP protection: IP20
Width: 85 mm
Height: 80 mm
Material: PCB
| Remote control | Batteries | Voltage | Control | |
| 1 zone | 2xAAA | 3V | 30 m | |
| Total output | Output | Voltage | Control | |
| 10A | 6A/channel | 12-24VDC | 30 m | |
| Downloads available : | ||||
| manual | ||||
Sold individually - Batteries not included.
The luminaire is sold without an E14 bulb.
Bulb and bulb holder not included.
| Hole diameter | Ø 90 mm |
| Dimensions (ØxH) | Ø 103 x 60 mm |
| Adjustable | No |
| IP protection | 20 |
Kanlux APRILA is a range of white decorative rings made from aluminium. Kanlux APRILA has a rounded shape and gives the option of adjusting the angle of the luminous flux within a range of 20 degrees. It is possible to use the luminaires with JDR or MR-16 housings, allowing light sources to be installed to suit the project.
Bulb not included.
| Dimensions (ØxH) | Ø 95 x 125 mm |
| Adjustable | Yes |
| IP rating | 20 |
Delicate edges, curved lines and a rounded shape give Kanlux BORD luminaires a touch of elegance and subtlety. Their modern design, simple elegance and rounded shape ensure that these luminaires will blend in with both private and commercial spaces.
| Power | Output voltage | |
| 6W | 12V DC / 1 A | |
| Input voltage | IP protection | |
| 100/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 60 x 35 x 23 |
|
| Power | Lumens | Voltage | Angle 120° |
|
| 16 W/m | 1300 Lm/m | 12 VDC | ||
| IP protection | Colour temperature | |||
| 20 | 3000 - 6000 K | |||
| Number of LEDs per ml | Dimensions (L x W x H) | |||
| 120 | 5000 x 10 x 2 mm | |||
| Dimmable | Yes | |||
12V DC LED power supply required / controller and remote control not supplied
Calculate your power supply :
| Power | Lumens | Voltage | Angle 120° |
|
| 9 W/m | 960 Lm/m | 12 VDC | ||
| IP protection | Colour temperature | |||
| 20 | RGB+W | |||
| Number of LEDs per ml | Dimensions (L x W x H) | |||
| 60 | 5000 x 10 x 1.5 mm | |||
| Dimmable | Yes | |||
12V DC LED power supply required / controller and remote control not supplied
Calculate your power supply:
The power in W of your power supply is proportional to the length in ml.
| Power | Voltage | Angle | Dimmable |
| 0.28W | 230V | -° | No |
| Selectable temperature | Lumen | ||
| 3000K | 18 | ||
| Power | Voltage | Angle | Dimmable |
| 0.28W | 230V | -° | No |
| Selectable temperature | Lumen | ||
| 3000K | 18 | ||
| Power | Output voltage | |
| 40W | 30 -42V DC / 970mA | |
| Input voltage | IP protection | |
| 180/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 120 X 45 x 30 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
Bulb and bulb holder not included.
| Hole diameter | Ø 157 x 80 mm |
| Dimensions (LxW) | Ø 175 x 93 mm |
| Adjustable | Yes |
| IP rating | 20 |
| Power | Output voltage | |
| 13-36W | 3-66V DC / 200-1050 mA | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| DALI or PUSH or 0-10V | (L x W x H): 168 x 39 x 30 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Lumens | Voltage | Angle | Dimmable |
| 35.6W | 4000 | 230V | 300° | No |
| Power | Lumens | Voltage | Angle | Dimmable |
| 9W | 820 | 230 V | 360° | No |
| Power | Lumens | Voltage | Angle 120° |
|
| 8 W/m | 760 Lm/m | 12 VDC | ||
| IP protection | Colour temperature | |||
| 20 | 4000 K | |||
| Number of LEDs per ml | Dimensions (L x W x H) | |||
| 60 | 5000 x 8 x 1.5 mm | |||
| Dimmable | Yes | |||
12V DC LED power supply required / controller and remote control not supplied
Calculate your power supply:
The power in W of your power supply is proportional to the length in ml.
| Power | Lumens | Voltage | Angle 120° |
|
| 8 W/m | 680 Lm/m | 12 VDC | ||
| IP protection | Colour temperature | |||
| 20 | 3000 K | |||
| Number of LEDs per ml | Dimensions (L x W x H) | |||
| 60 | 5000 x 8 x 1.5 mm | |||
| Dimmable | Yes | |||
12V DC LED power supply required / controller and remote control not supplied
Calculate your power supply:
The power in W of your power supply is proportional to the length in ml.
| Power | Lumens | Voltage | Beam angle | Dimmable |
| 30W | 2300 | 230V | 320° | No |
| Power | Lumens | Voltage | Angle | Dimmable |
| 6W | 650 | 230 V | 300° | No |
| Detector | Detection distance | |
| RF + Twilight | 6 x 10 m | |
| Adjustable detector | Angle opening | |
| Yes | 360° | |
| Drilling diameter | Dimensions | |
| Ø 55 mm | (Ø x H): Ø 72 x 75 mm |
|
| IP protection | Voltage | |
| 20 | 220/240V AC |
|
Bulb and bulb holder not included.
| Hole diameter | Ø 240 x 80 mm |
| Dimensions (LxW) | Ø 258 x 93 mm |
| Adjustable | Yes |
| IP rating | 20 |
Bulb and bulb holder not included.
| Hole diameter | Ø 72 mm |
| Dimensions (ØxH) | Ø 83 x 74 mm |
| Adjustable | No |
| IP protection | 20 |
Bulb and bulb holder not included.
| Hole diameter | Ø 72 mm |
| Dimensions (ØxH) | Ø 82 x 64 mm |
| Adjustable | Yes |
| IP rating | 20 |
Bulb and bulb holder not included.
| Hole diameter | Ø 75 mm |
| Dimensions (ØxH) | Ø 85 x 47 mm |
| Adjustable | Yes |
| IP rating | 20 |
| Power | Output voltage | |
| 10W | 12V DC 0.85A | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 100 x 39 x 20 |
|
Dimensions may vary.
| Power | Output voltage | |
| 43W | 21-70V DC / 350-1050mA | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| Yes DALI2 / PUSH | (L x W x H): 135 x 72 x 25 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 45W | 14-43V DC / 1050-1600mA | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| Yes DALI PUSH | (L x W x H): 140 x 75 x 25 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
