Availability
Price
Shape
Angle
Detection zone
Ampère
Type of products
Bulb(s) included
Brand
Base
Temperature in K or Colour
Power in Watt
Dimmable
Guarantee
Bulb / Holder / Product type
Exterior finish
Power supply
IP protection
Voltage
Dimensions
Length cm
Type of product 2
Detector
Adjustable
Diameter or drill hole
DC output voltage
Driver intensity
Colour
Brands
Materials
Number of light source(s)
Electrical insulation class
Collection
Type of bulb
Subcategories
There are 892 products.
Active filters
| Total output | Output | Voltage | Control | |
| 15A | 12/2424VDC | 12/24VDC | - | |
| Downloads available : | ||||
| manual | ||||
| Total output | Output | Voltage | Control | |
| 15A | 6A/channel | 12-24VDC | 30 m | |
| Downloads available : | ||||
| manual | ||||
Sold individually - Remote control not supplied.
| Power | Output voltage | |
| 40W | 36-55V DC / 880 mA | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| Yes TRIAC | (L x W x H): 145 x 45 x 30 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
Non-replaceable lithium battery
DB series switching devices, which meet the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, solid walls made of non-combustible materials). They may not be used on flammable surfaces (e.g. plasterboard, wood, etc.), hollow walls or electrical conduits.
| Power | Output voltage | |
| 8-18 * 1W | 24-72V DC / 300mA | |
| Input voltage | IP protection | |
| 85/265V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 60 x 30 x 18 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Lumens | Voltage | Angle | Dimmable |
| 45W | 1350 | 230V | 110° | Yes remote control |
| Power | Lumens | Voltage | Angle | Dimmable |
| 62W | 5580 | 230V | 110° | Yes by remote control |
Bulb and bulb holder not included.
| Hole diameter | Ø 78 mm |
| Dimensions (ØxH) | Ø 58 mm |
| Adjustable | No |
| IP protection | 20 |
| Power | Lumens | Voltage | Angle | Dimmable |
| 6W | 580 | 230V | 30° | Yes remote control |
| Downloads available : | ||||
| Manual | ||||
Sold individually - remote control not included
| Power | Output voltage | |
| 6-10w * 1W | 18-34V DC / 600mA | |
| Input voltage | IP protection | |
| 85/265V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 65 x 35 x 24 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Lumens | Voltage | Angle | Dimmable |
| 50W | 3200 | 230V | 300° | No |
Suspended aluminium lamp with a modern design of interlaced figures.
It has an integrated LED luminaire that diffuses a strong, even light with a total power of 50W and a luminous intensity of 3200 lumens.
This lamp brings a unique and elegant style to any interior.
Bulb not included.
| Drilling diameter | Ø 65-70 mm |
| Dimensions (ØxH) | Ø 56 x 80 mm |
| Adjustable | Yes |
| IP rating | 20 |
Kanlux CHIRO GU10 is a completely new solution in the decorative lighting category. It is a SPOT type luminaire that can be recessed in a false ceiling as a single point of light. The luminaire's greatest assets are its unique design and the way it can be installed.
| Power | Voltage | Lumen | Temperature |
| 0.8W | 12 VDC | 13 | 3000K |
| Hole diameter | Dimensions (ØxH) | ||
| Ø 60 mm | Ø 75 x75 x 23 mm | ||
| IP rating | 20 |
||
DC 12V power supply required
Kanlux APUS offers a modern design combined with an attractive lighting effect. It's an excellent solution for lighting staircases and corridors, as well as accentuating the design of rooms. The luminaire's unusual structure ensures even light distribution. The AV version has a power supply that fits into the housing, while the PIR version has a motion sensor. The sensor detects movement/triggers the light on regardless of the intensity of light in the surrounding area.
Bulb not included.
| Drilling diameter | Ø 65-70 mm |
| Dimensions (ØxH) | Ø 56 x 80 mm |
| Adjustable | Yes |
| IP rating | 20 |
Kanlux CHIRO GU10 is a completely new solution in the decorative lighting category. It is a SPOT type luminaire that can be recessed in a false ceiling as a single point of light. The luminaire's greatest assets are its unique design and the way it can be installed.
Bulb and bulb holder not included.
| Hole diameter | Ø 67 mm |
| Dimensions (ØxH) | Ø 80 mm |
| Adjustable | No |
| IP protection | 20 |
KANLUX GOVIK is a new recessed luminaire with a unique structure. The use of a small acrylic glass diffuses the light and makes the installed light source invisible. The luminaire looks like a tiny built-in surface-mounted wall light.
| Power | Voltage | Lumen | Temperature |
| 1.5W | 12 VDC | 30 | 4000K |
| Hole diameter | Dimensions (ØxH) | ||
| Ø 60 mm | Ø 75 x 55 x 16 mm | ||
| IP rating | 20 | ||
DC 12V power supply required
| Power | Lumens | Voltage | Angle | Dimmable |
| 18W | 1560 | 230V | 120° | yes* Dimmable |
Dimmable: Yes, equipped with an integrated dimmable light source for wall dimmer
With Kaito Pro, Bønnelycke MDD has created a ceiling lamp that breaks with tradition. A ceiling light where design and innovation meet to create a sublime lamp. Its shape is recognisable by its clean, modern look and its bright, uniform surface. Its functional brass joint adds an elegant touch of exclusivity to the design. Fixed 24W LED panel.
| Power | Lumens | Voltage | Angle | Dimmable |
| 18W | 1560 | 230V | 120° | yes* Dimmable |
Dimmable: Yes, with integrated dimmable light source for wall dimmerWith Kaito Pro, Bønnelycke MDD has created a ceiling light that breaks with tradition. A ceiling light where design and innovation meet to create a sublime lamp. Its shape is recognisable by its clean, modern look and its bright, uniform surface. Its functional brass joint adds an elegant touch of exclusivity to the design. Fixed 24W LED panel.
Mains voltage:220–240V AC 50/60Hz
Number of sockets:4
Maximum current: 13A
Maximum power:3000W
Surge protection:1500V
Protection rating: IP20
Cable marking:H05VV-F, 3×1.5mm², 0.2mm
Cable sheath material: PVC
Length: 5.0 [m]
Mains voltage:110–250 V AC 50/60 Hz
Maximum load: 10 A
Maximum power:2,500 W
Overvoltage protection:1,500 V
Number of 230 V sockets:5
Protection rating: IP22
Cable marking:H05VV-F, 3×1.0 mm²,
sheath 0.2 mm cable material: PVC
Housing material:ABS
Length: 2.0 [m]:
Switch:Yes, for each socket separately
Mains voltage:110–250V AC 50/60Hz
Maximum current: 10A
Maximum power:2500W
Surge protection:1500V
Number of 230V sockets:5
Socket types: Schuko
Number of 5V 2A USB sockets:4x USB-A + 1x USB-C
Protection rating: IP22
Cable marking:H05VV-F, 3x1.0 mm², 0.2 mm
Cable sheath material: PVC
Housing material:ABS
Length: 2.0 [m]:
Switch:Yes, for each socket separately
Spotlight with GU10 socket.
Spotlight with GU10 socket.
Remote control for use with a motion detector, can be fitted to Ufo A Series Industrial High Bay bells if required.
| Power | Lumens | Voltage | Angle 120° |
|
| 15 W/m | 960 Lm/m | 24 VDC | ||
| IP protection | Colour temperature | |||
| 20 | RGB+CCT | |||
| Number of LEDs per ml | Dimensions (L x W x H) | |||
| 60 | 5000 x 12 x 3 mm | |||
| Dimmable | Yes | |||
24V DC LED power supply required / controller and remote control not supplied
Calculate your power supply:
The power in W of your power supply is proportional to the length in ml.
Available on 20/07/2025
The luminaire is sold without a bulb.
The customer's visual perception of the sizes, colours, textures, etc. of our products may be affected by factors such as ambient light, screen calibration, viewing angle or each user's device. The customer must bear in mind that returns made for reasons unrelated to the functioning of the product will be charged to the customer.
The luminaire is sold without a bulb.
The customer's visual perception of the sizes, colours, textures, etc. of our products may be affected by factors such as ambient light, screen calibration, viewing angle or each user's device. The customer must bear in mind that returns made for reasons unrelated to the functioning of the product will be charged to the customer.
| Power | Output voltage | |
| 30W | 27-40V DC / 700 mA | |
| Input voltage | IP protection | |
| 100/277V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| Yes 0-10V | (L x W x H): 145 x 43 x 29 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 5-14W | 25-42V DC / 200-350 mA | |
| Input voltage | IP protection | |
| 220-240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| Yes Triac | (L x W x H): 121.9 x 39.9 x 25 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
The luminaire is sold without an E27 bulb.
The elegant ceiling lights in the Horus collection have been designed for modern interiors and avant-garde homes. The elegant ceiling and suspended luminaires in this series are characterised by their simple, tasteful lines and original shapes. The great advantage of the HORUS collection is its versatility - the lamps shown fit in perfectly with modernist, Scandinavian, loft or modern interiors. Excellent quality and an unrivalled effect for the most demanding customers.
| Power | Output voltage | |
| 12-20 * 1W | 36-68V DC / 300 mA | |
| Input voltage | IP protection | |
| 85/277V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 70 x 34 x 26 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Voltage | Angle | Dimmable |
| 0.5W | 230V | 100° | No |
| Selectable temperature | Lumen | ||
| 3000K | 30 | ||
Kanlux ULOV LED is a plug-in lamp with infinitely variable light intensity. It has a built-in twilight sensor (which automatically switches the light on and off). Its user-friendly design means it can be placed in sockets in bedrooms, children's rooms, bedrooms for the elderly or in corridors.
| Power | Output voltage | |
| 25.2W | 9-42V DC / 600 mA | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 98 x 40.5 x 25.5 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED Driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 35.7 W | 9-42V DC / 850 mA | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 98 x 40.5 x 25.5 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED Driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 36W | 25-42V DC / 900 mA | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 115 x 41 x 28 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
Bulb and bulb holder not included.
Kanlux DALLA is a meticulously crafted light fitting, designed for indoor use. It features a movable ring, allowing the light beam to be adjusted. Its timeless shapes and colours create an effect of understated, contemporary elegance.
| Total output | Output | Voltage | Control | |
| 15A | 6A/channel | 12-24VDC | 30 m | |
| Downloads available : | ||||
| manual | ||||
Sold individually - Remote control not supplied.
| Power | Voltage | Angle | Dimmable |
| 1.2W | 230V | 100° | No |
| Selectable temperature | Lumen | ||
| 4500K | 120 | ||
| Hole diameter | Ø 60 x 60 mm |
| Dimensions (ØxH) | Ø 85 x 85 mm |
| Adjustable | No |
| IP protection | 20 |
Including a PIR motion sensor, with a minimum of 10 lux, the motion sensor is active, thus allowing the operation when there is no clarity.
Attention, it is not convenient to use the Ø 68 mounting boxes, the mounting box is live with the product.
| Power | Voltage | Angle | Dimmable |
| 1.2W | 230V | 100° | No |
| Selectable temperature | Lumen | ||
| 4500K | 120 | ||
| Hole diameter | Ø 60 x 60 mm |
| Dimensions (ØxH) | Ø 85 x 85 mm |
| Adjustable | No |
| IP protection | 20 |
Attention, it is not convenient to use the Ø 68 mounting boxes, the mounting box is live with the product.
The luminaire is sold without an E27 bulb.
| Power | Lumens | Voltage | Angle 120° |
|
| 9 W/m | 960 Lm/m | 24 VDC | ||
| IP protection | Colour temperature | |||
| 20 | 4000 K | |||
| Number of LEDs per ml | Dimensions (L x W x H) | |||
| 320 cob | 5000 x 8 x 2 mm | |||
| Dimmable | Yes | |||
24V DC LED power supply required / controller and remote control not supplied
Calculate your power supply:
The power in W of your power supply is proportional to the length in ml.
Bulb and bulb holder not included.
Kanlux DALLA is a meticulously crafted light fitting, designed for indoor use. It features a movable ring, allowing the light beam to be adjusted. Its timeless shapes and colours create an effect of understated, contemporary elegance.