Filter By
Availability
Price
Shape
Angle
Detection zone
Ampère
Brand
Base
Temperature in K or Colour
Power in Watt
Dimmable
Guarantee
Bulb / Holder / Product type
Exterior finish
Power supply
IP protection
Voltage
Dimensions
Type of product 2
Detector
Adjustable
Diameter or drill hole
DC output voltage
Driver intensity
Colour
New Products
New products
Home
Subcategories
There are 198 products.
Active filters
Non-contact detection system for cupboard or wardrobe doors.
| Switch Sensor | Detection distance | |
| Non-contact | 0 to 3.5 cm | |
| Adjustable sensor | Angle opening | |
| No | 90° | |
| Drilling diameter | Dimensions | |
| - | (L x W x H): 21 x 36 x 21 mm | |
| IP protection | Voltage | |
| 20 | 220-240V AC | |
The Contactless Detection Switch for Cabinet Doors allows any light in a cabinet to be switched on without the need for a wall switch.
Features of the Contactless Detection Switch for Cabinet Doors
The Contactless Detection Switch for Cabinet Doors detects when the door is opened by switching on the light to which it is connected. This light will remain on until the sensor detects that the door is closed, at which point the light will be switched off. The sensor's angle of detection is 90°.
Applications of the Contactless Detection Switch for Cabinet Doors
The Contactless Detection Switch for Cabinet Doors is the perfect solution for illuminating your tool cabinets, wardrobes and kitchen cupboards, making it easier to see and select what you need.
Tringhs black 3 ring pendant lamp 76w CTT dimmable by remote control
![]()
| Power | Lumens | Voltage | Angle | Dimmable |
| 76W "4000k | 2050 | 230V | 300° | Yes remote control |
Black 3 ring pendant lamp 36w CTT
![]()
| Power | Lumens | Voltage | Angle | Dimmable |
| 36W "4000k | 2050 | 230V | 300° | No |
The switch allows you to change the colour temperature from 3000k - 4000k or 6000k.
LED power supply 12W 12VDC 1.0A
| Power | Output voltage | |
| 12W | 12V DC / 1 A | |
| Input voltage | IP protection | |
| 110/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 42 x 40 x 20 |
|
Dimensions may vary.
*Stable performance: no flickering after connection, good anti-interference. The casing is made of plastic to protect it from dust and moisture.
*Safety: no transformer noise, insulated end cover. The protective device is equipped with overload protection, overvoltage protection, short-circuit protection and overheating protection.
*Small and flat: with dimensions of 42 x 40 x 20 mm, it is small and can be easily installed in any room without compromising appearance. Inputs and outputs are clearly marked for easy electrical connection.
*Easy connection: simple connections via screw terminals allow easy replacement of existing transformers.
* Wide application: suitable for a variety of low voltage 12 V LED applications, including LED strip lights, doorbells, cabinet lights, LED displays.
SPI3-M 3 in 1 Mini LED Controller (2.4GHz) 5-24V DC
| Total output | Output | Voltage | Control | |
| 6A | 3A/channel | 5-24VDC | 30 m | |
| Downloads available : | ||||
| Manual download | ||||
Miboxer 2-wire 2 in 1 2.4 GHz 12-48 V DC LED controller (LC2-RF)
| Total output | Output | Voltage | Control | |
| 10A | 10 A/channel | 12-48VDC | 30 m | |
| Downloads available : | ||||
| Manual download | ||||
Sold individually - remote control not included.
Kanlux - PRESENSOR White HF Motion Detector - Ref: 38752
| Detector | Detection range | |
| HF + Twilight | 6 m | |
| Adjustable sensor | Angle of coverage | |
| No | 360° | |
| Drill hole diameter | Dimensions | |
| Ø 63–66 mm | (Ø x H): 76 x 66 mm | |
| IP rating | Voltage | |
| 20 | 220/240V AC |
|
PRESENSOR is a range of microwave presence detectors. The range stands out from standard HF detectors thanks to its 24GHz technology, which has a significant impact on detection accuracy. As a result, the presence detector is capable of detecting all types of movement, such as a person moving around, subtle movements such as working at a computer, or even static presence such as someone watching television, making it easier to adjust the lighting to suit the situation.

Kanlux - PRESENSOR Black HF Motion Detector - Ref: 38753
| Detector | Detection range | |
| HF + Twilight | 6 m | |
| Adjustable sensor | Angle of coverage | |
| No | 360° | |
| Drill hole diameter | Dimensions | |
| Ø 63–66 mm | (Ø x H): 76 x 66 mm | |
| IP rating | Voltage | |
| 20 | 220/240V AC |
|
PRESENSOR is a range of microwave presence detectors. The range stands out from standard HF detectors thanks to its 24GHz technology, which has a significant impact on detection accuracy. As a result, the presence detector is capable of detecting all types of movement, such as a person moving around, subtle movements such as working at a computer, or even static presence such as someone watching television, making it easier to adjust the lighting to suit the situation.

I.R ZONA black motion detector
| Detector | Detection distance | |
| IR + Twilight | 6 m | |
| Adjustable detector | Angle opening | |
| Yes | 360° | |
| Drilling diameter | Dimensions | |
| SLOT | (Ø x H): 115 x 25 mm |
|
| IP protection | Voltage | |
| 20 | 220/240V AC |
|
ZONA FLAT is an ultra-compact motion detector designed for discreet installation in modern spaces. Thanks to its compact design, it blends in perfectly with its surroundings without disrupting the aesthetics of the interior. It detects movement accurately within a radius of 8 metres and gives you total control over the parameters - setting the lighting duration (from 10 seconds to 15 minutes) and the light intensity threshold. It's the perfect solution for intelligent lighting control, combining minimalist design with maximum functionality.
CYBER TM-6 clock/programmer
- Kanlux CYBER is an adapter for electrical sockets with a digital timer. It can be used to programme the switching on and off of connected appliances at specific times.
- - equipped with a memory-keeping system
- - up to 10 on/off cycles can be programmed
- - the programmer works in daily and weekly modes
LVT - DIP microwave motion sensor - Ref: ZA101W
| Detector | Detection range | |
| HF + Twilight | 8 m | |
| Adjustable sensor | Angle of coverage | |
| Yes | 180/360° | |
| Drill hole diameter | Dimensions | |
| Projection | (L x W x H): 78 x 37 x 25mm | |
| IP rating | Voltage | |
| 20 | 220/240V AC |
|
A highly sensitive microwave sensor with adjustable settings (illumination duration, activation threshold and detection range).
30W Single Phase Black Bluetooth Rail Speaker

Transform your space into a unique sound experience! This 30W rail-mounted Bluetooth speaker combines elegant design with powerful sound. Easily configure your master/slave system and let the music envelop you.
Bluetooth Speaker On White Single Phase 30W

Transform your space into a unique sound experience! This 30W rail-mounted Bluetooth speaker combines elegant design with powerful sound. Easily configure your master/slave system and let the music envelop you.
Kanlux - LED strip COB, 3000K, 5 m, 320 LEDs/m, 10W/m, IP20 – 12V – 3-year warranty – Ref: 37230

![]()
24V DC LED power supply required / controller and remote control not supplied
Calculate the power supply requirements:
The power in W of your power supply is proportional to the length in ml.
The Kanlux LCOB LED strip is a unique lighting solution. It offers very high luminous efficacy (up to 110 lumens per watt) and comes with a 3-year warranty. However, its main feature is that it illuminates along its entire length: there are no brighter or darker areas, and no visible light spots. The Kanlux LCOB strip emits uniform light regardless of the depth of the profile and the transparency of the diffuser.

Kanlux - LED strip COB, 4000K, 5m, 320 LEDs/m, 10W/m, IP20 – 12V – 3-year warranty – Ref: 37231

![]()
24V DC LED power supply required / controller and remote control not supplied
Calculate the power supply requirements:
The power in W of your power supply is proportional to the length in ml.
The Kanlux LCOB LED strip is a unique lighting solution. It offers very high luminous efficacy (up to 110 lumens per watt) and comes with a 3-year warranty. However, its main feature is that it illuminates along its entire length: there are no brighter or darker areas, and no visible light spots. The Kanlux LCOB strip emits uniform light regardless of the depth of the profile and the transparency of the diffuser.

LED power supply 7.2W 12VDC 600mA
| Power | Output voltage | |
| 7.2W | 12V DC / 0.6 A | |
| Input voltage | IP protection | |
| 110/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 42 x 40 x 20 |
|
Dimensions may vary.
*Stable performance: no flickering after connection, good anti-interference. The casing is made of plastic to protect it from dust and moisture.
*Safety: no transformer noise, insulated end cover. The protective device is equipped with overload protection, overvoltage protection, short-circuit protection and overheating protection.
*Small and flat: with dimensions of 42 x 40 x 20 mm, it is small and can be easily installed in any room without compromising appearance. Inputs and outputs are clearly marked for easy electrical connection.
*Easy connection: simple connections via screw terminals allow easy replacement of existing transformers.
* Wide application: suitable for a variety of low voltage 12 V LED applications, including LED strip lights, doorbells, cabinet lights, LED displays.
Miboxer – 2-in-1 LED Controller (Zigbee 3.0 + 2.4G) – Ref: E2-ZR
| Total output | Output | Voltage | Control | |
| 10A | 12 A per channel | 12–24 V DC | 30 m | |
| Available downloads: | ||||
| Manual download | ||||
Sold individually – remote control not included.

Miboxer – 3-in-1 LED Controller (Zigbee 3.0 + 2.4G) – Ref: E3-ZR
| Total output | Output | Voltage | Control | |
| 10A | 6 A per channel | 12–24 V DC | 30 m | |
| Available downloads: | ||||
| Manual download | ||||
Sold individually – remote control not included.
