Availability
Price
Shape
Angle
Detection zone
Ampère
Brand
Base
Temperature in K or Colour
Power in Watt
Dimmable
Guarantee
Bulb / Holder / Product type
Exterior finish
Power supply
IP protection
Voltage
Dimensions
Length cm
Type of product 2
Detector
Adjustable
Diameter or drill hole
DC output voltage
Driver intensity
Colour
Subcategories
There are 529 products.
Active filters
| Switch Sensor | Detection distance | |
| Non-contact | 0 to 3.5 cm | |
| Adjustable sensor | Angle opening | |
| No | 90° | |
| Drilling diameter | Dimensions | |
| - | (L x W x H): 21 x 36 x 21 mm | |
| IP protection | Voltage | |
| 20 | 220-240V AC | |
The Contactless Detection Switch for Cabinet Doors allows any light in a cabinet to be switched on without the need for a wall switch.
Features of the Contactless Detection Switch for Cabinet Doors
The Contactless Detection Switch for Cabinet Doors detects when the door is opened by switching on the light to which it is connected. This light will remain on until the sensor detects that the door is closed, at which point the light will be switched off. The sensor's angle of detection is 90°.
Applications of the Contactless Detection Switch for Cabinet Doors
The Contactless Detection Switch for Cabinet Doors is the perfect solution for illuminating your tool cabinets, wardrobes and kitchen cupboards, making it easier to see and select what you need.
| Power | Lumens | Voltage | Angle | Dimmable |
| 76W "4000k | 2050 | 230V | 300° | Yes remote control |
| Power | Lumens | Voltage | Angle | Dimmable |
| 36W "4000k | 2050 | 230V | 300° | No |
| Power | Output voltage | |
| 12W | 12V DC / 1 A | |
| Input voltage | IP protection | |
| 110/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 42 x 40 x 20 |
|
Dimensions may vary.
*Stable performance: no flickering after connection, good anti-interference. The casing is made of plastic to protect it from dust and moisture.
*Safety: no transformer noise, insulated end cover. The protective device is equipped with overload protection, overvoltage protection, short-circuit protection and overheating protection.
*Small and flat: with dimensions of 42 x 40 x 20 mm, it is small and can be easily installed in any room without compromising appearance. Inputs and outputs are clearly marked for easy electrical connection.
*Easy connection: simple connections via screw terminals allow easy replacement of existing transformers.
* Wide application: suitable for a variety of low voltage 12 V LED applications, including LED strip lights, doorbells, cabinet lights, LED displays.
| Total output | Output | Voltage | Control | |
| 6A | 3A/channel | 5-24VDC | 30 m | |
| Downloads available : | ||||
| Manual download | ||||
Sold individually - remote control not included.
| Total output | Output | Voltage | Control | |
| 10A | 10 A/channel | 12-48VDC | 30 m | |
| Downloads available : | ||||
| Manual download | ||||
Sold individually - remote control not included.
| Detector | Detection range | |
| HF + Twilight | 6 m | |
| Adjustable sensor | Angle of coverage | |
| No | 360° | |
| Drill hole diameter | Dimensions | |
| Ø 63–66 mm | (Ø x H): 76 x 66 mm | |
| IP rating | Voltage | |
| 20 | 220/240V AC |
|
PRESENSOR is a range of microwave presence detectors. The range stands out from standard HF detectors thanks to its 24GHz technology, which has a significant impact on detection accuracy. As a result, the presence detector is capable of detecting all types of movement, such as a person moving around, subtle movements such as working at a computer, or even static presence such as someone watching television, making it easier to adjust the lighting to suit the situation.
| Detector | Detection range | |
| HF + Twilight | 6 m | |
| Adjustable sensor | Angle of coverage | |
| No | 360° | |
| Drill hole diameter | Dimensions | |
| Ø 63–66 mm | (Ø x H): 76 x 66 mm | |
| IP rating | Voltage | |
| 20 | 220/240V AC |
|
PRESENSOR is a range of microwave presence detectors. The range stands out from standard HF detectors thanks to its 24GHz technology, which has a significant impact on detection accuracy. As a result, the presence detector is capable of detecting all types of movement, such as a person moving around, subtle movements such as working at a computer, or even static presence such as someone watching television, making it easier to adjust the lighting to suit the situation.
| Detector | Detection distance | |
| IR + Twilight | 6 m | |
| Adjustable detector | Angle opening | |
| Yes | 360° | |
| Drilling diameter | Dimensions | |
| SLOT | (Ø x H): 115 x 25 mm |
|
| IP protection | Voltage | |
| 20 | 220/240V AC |
|
ZONA FLAT is an ultra-compact motion detector designed for discreet installation in modern spaces. Thanks to its compact design, it blends in perfectly with its surroundings without disrupting the aesthetics of the interior. It detects movement accurately within a radius of 8 metres and gives you total control over the parameters - setting the lighting duration (from 10 seconds to 15 minutes) and the light intensity threshold. It's the perfect solution for intelligent lighting control, combining minimalist design with maximum functionality.
| Detector | Detection range | |
| HF + Twilight | 8 m | |
| Adjustable sensor | Angle of coverage | |
| Yes | 180/360° | |
| Drill hole diameter | Dimensions | |
| Projection | (L x W x H): 78 x 37 x 25mm | |
| IP rating | Voltage | |
| 20 | 220/240V AC |
|
A highly sensitive microwave sensor with adjustable settings (illumination duration, activation threshold and detection range).
24V DC LED power supply required / controller and remote control not supplied
Calculate the power supply requirements:
The power in W of your power supply is proportional to the length in ml.
The Kanlux LCOB LED strip is a unique lighting solution. It offers very high luminous efficacy (up to 110 lumens per watt) and comes with a 3-year warranty. However, its main feature is that it illuminates along its entire length: there are no brighter or darker areas, and no visible light spots. The Kanlux LCOB strip emits uniform light regardless of the depth of the profile and the transparency of the diffuser.
24V DC LED power supply required / controller and remote control not supplied
Calculate the power supply requirements:
The power in W of your power supply is proportional to the length in ml.
The Kanlux LCOB LED strip is a unique lighting solution. It offers very high luminous efficacy (up to 110 lumens per watt) and comes with a 3-year warranty. However, its main feature is that it illuminates along its entire length: there are no brighter or darker areas, and no visible light spots. The Kanlux LCOB strip emits uniform light regardless of the depth of the profile and the transparency of the diffuser.
| Power | Output voltage | |
| 7.2W | 12V DC / 0.6 A | |
| Input voltage | IP protection | |
| 110/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 42 x 40 x 20 |
|
Dimensions may vary.
*Stable performance: no flickering after connection, good anti-interference. The casing is made of plastic to protect it from dust and moisture.
*Safety: no transformer noise, insulated end cover. The protective device is equipped with overload protection, overvoltage protection, short-circuit protection and overheating protection.
*Small and flat: with dimensions of 42 x 40 x 20 mm, it is small and can be easily installed in any room without compromising appearance. Inputs and outputs are clearly marked for easy electrical connection.
*Easy connection: simple connections via screw terminals allow easy replacement of existing transformers.
* Wide application: suitable for a variety of low voltage 12 V LED applications, including LED strip lights, doorbells, cabinet lights, LED displays.
| Total output | Output | Voltage | Control | |
| 10A | 12 A per channel | 12–24 V DC | 30 m | |
| Available downloads: | ||||
| Manual download | ||||
Sold individually – remote control not included.
| Total output | Output | Voltage | Control | |
| 10A | 6 A per channel | 12–24 V DC | 30 m | |
| Available downloads: | ||||
| Manual download | ||||
Sold individually – remote control not included.
Bulb and bulb holder not included.
| Hole diameter | Ø 82 mm |
| Dimensions (ØxH) | Ø 92 x 44 mm |
| Adjustable | Yes |
| IP rating | 20 |
Kanlux IVRI is a range of decorative rings made from aluminium. Kanlux IVRI is expressive in its shapes, and also allows the direction of light to be adjusted within a range of 30 degrees.
| Detector | Detection distance | |
| H.F + Twilight | 10 m | |
| Adjustable detector | Angle opening | |
| Yes | H 360 / V 140 | |
| Drilling diameter | Dimensions | |
| Projection | (L x W x H): 70 x 40 x 40 mm | |
| IP protection | Voltage | |
| 20 | 220/240V AC |
|
Kanlux ROLF JQ is a microwave motion sensor. The maximum horizontal operating angle of the sensor is 360 degrees. It is possible to set the lighting time and the level of light intensity at which the sensor operates.
Bulb not included.
| Dimensions (ØxH) | Ø 85 x 115 mm |
| Adjustable | No |
| IP rating | 20 |
A 12V DC LED power supply is required / controller and remote control not included
Calculate the power rating for your power supply:
The power output (in W) of your power supply is proportional to the length (in ml).
Ballast insulation is mandatory
| Power | Voltage | Angle | Lumen |
| 5W | 500mAh lithium battery | - | 50 |
| Battery life | Dimensions | ||
|
HIGH mode – 140lm / 1h 2. LOW mode – 70 lm / 2 hours 3. Strobe mode – 140 lm / 1.5 hours 4. SUPER HIGH mode – 200 lm / 0.5 hours |
60 x 40 x 20 [mm] | ||
USB-C charger not included.
| Power | Output voltage | |
| 24W | 12V DC / 2 A | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 88 x 46 x 35 |
|
Dimensions may vary.
| Power | Output voltage | |
| 60W | 12V DC / 5 A | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 120 x 60 x 35 |
|
Dimensions may vary.
Bulb and bulb holder not included.
| Hole diameter | Ø 65-70 mm |
| Dimensions (ØxH) | Ø 90 mm |
| Adjustable | No |
| IP protection | 20 |
The wide range of Kanlux MORTA luminaires makes it possible to create original arrangements in any home. Kanlux MORTA will meet the expectations of all those who appreciate high-quality products with an attractive and original design.
| Power | Output voltage | |
| 36W | 12V DC / 3 A | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 99 x 43 x 31 |
|
Dimensions may vary.
The luminaire is sold without a bulb.
Kanlux ENALI is a range of ceiling and wall luminaires. Thanks to the adjustable joint, the light beam can be directed freely. The luminaires fit in perfectly with Scandinavian-style interiors, their shapes recalling the retro character of the interiors and their chrome elements adding a subtle touch to modern interiors.
| Power | Lumens | Voltage | Angle 120° |
|
| 9 W/m | 960 Lm/m | 12 VDC | ||
| IP protection | Colour temperature | |||
| 20 | 4000 K | |||
| Number of LEDs per ml | Dimensions (L x W x H) | |||
| 60 | 5000 x 10 x 1.5 mm | |||
| Dimmable | Yes | |||
12V DC LED power supply required / controller and remote control not supplied
Calculate your power supply:
The power in W of your power supply is proportional to the length in ml.
| Power | Lumens | Voltage | Angle 120° |
|
| 9 W/m | 960 Lm/m | 12 VDC | ||
| IP protection | Colour temperature | |||
| 20 | RGB | |||
| Number of LEDs per ml | Dimensions (L x W x H) | |||
| 60 | 5000 x 10 x 1.5 mm | |||
| Dimmable | Yes | |||
12V DC LED power supply required / controller and remote control not supplied
Calculate your power supply:
The power in W of your power supply is proportional to the length in ml.
| Power | Lumens | Voltage | Angle | Dimmable |
| 9W | 960 | 230V | 220° | Yes remote control |
| Downloads available : | ||||
| Manual | ||||
Sold individually - remote control not included
| Remote control | Batteries | Voltage | Control | |
| 1 zone | 2xAAA | 3V | 30 m | |
| Total output | Output | Voltage | Control | |
| 10A | 6A/channel | 12-24VDC | 30 m | |
| Downloads available : | ||||
| manual | ||||
Sold individually - Batteries not included.
| Remote control | Batteries | Voltage | Control | |
| 1 zone | 2xAAA | 3V | 30 m | |
| Total output | Output | Voltage | Control | |
| 10A | 6A/channel | 12-24VDC | 30 m | |
| Downloads available : | ||||
| manual | ||||
Sold individually - Batteries not included.
The luminaire is sold without an E14 bulb.
Bulb and bulb holder not included.
| Hole diameter | Ø 90 mm |
| Dimensions (ØxH) | Ø 103 x 60 mm |
| Adjustable | No |
| IP protection | 20 |
Kanlux APRILA is a range of white decorative rings made from aluminium. Kanlux APRILA has a rounded shape and gives the option of adjusting the angle of the luminous flux within a range of 20 degrees. It is possible to use the luminaires with JDR or MR-16 housings, allowing light sources to be installed to suit the project.
Bulb not included.
| Dimensions (ØxH) | Ø 95 x 125 mm |
| Adjustable | Yes |
| IP rating | 20 |
Delicate edges, curved lines and a rounded shape give Kanlux BORD luminaires a touch of elegance and subtlety. Their modern design, simple elegance and rounded shape ensure that these luminaires will blend in with both private and commercial spaces.
| Power | Output voltage | |
| 6W | 12V DC / 1 A | |
| Input voltage | IP protection | |
| 100/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 60 x 35 x 23 |
|
| Power | Voltage | Angle | Dimmable |
| 0.28W | 230V | -° | No |
| Selectable temperature | Lumen | ||
| 3000K | 18 | ||
| Power | Voltage | Angle | Dimmable |
| 0.28W | 230V | -° | No |
| Selectable temperature | Lumen | ||
| 3000K | 18 | ||
| Power | Output voltage | |
| 40W | 30 -42V DC / 970mA | |
| Input voltage | IP protection | |
| 180/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 120 X 45 x 30 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
Bulb and bulb holder not included.
| Hole diameter | Ø 157 x 80 mm |
| Dimensions (LxW) | Ø 175 x 93 mm |
| Adjustable | Yes |
| IP rating | 20 |