Availability
Price
Shape
Angle
Type of products
Brand
Base
Temperature in K or Colour
Power in Watt
Dimmable
Guarantee
Bulb / Holder / Product type
Exterior finish
IP protection
Voltage
Dimensions
Type of product 2
Detector
DC output voltage
Driver intensity
Colour
Brands
Materials
Number of light source(s)
Electrical insulation class
Subcategories
There are 89 products.
| Power | Lumens | Voltage | Angle | Dimmable |
| 36W "4000k | 2050 | 230V | 300° | No |
| Power | Output voltage | |
| 36W | 30-40V DC / 900 mA | |
| Input voltage | IP protection | |
| 180-264V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 118 x 42 x 28 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 12W | 12V DC / 1 A | |
| Input voltage | IP protection | |
| 110/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 42 x 40 x 20 |
|
Dimensions may vary.
*Stable performance: no flickering after connection, good anti-interference. The casing is made of plastic to protect it from dust and moisture.
*Safety: no transformer noise, insulated end cover. The protective device is equipped with overload protection, overvoltage protection, short-circuit protection and overheating protection.
*Small and flat: with dimensions of 42 x 40 x 20 mm, it is small and can be easily installed in any room without compromising appearance. Inputs and outputs are clearly marked for easy electrical connection.
*Easy connection: simple connections via screw terminals allow easy replacement of existing transformers.
* Wide application: suitable for a variety of low voltage 12 V LED applications, including LED strip lights, doorbells, cabinet lights, LED displays.
| Power | Lumens | Voltage | Angle 160° |
|
| 10 W/m | 1000 Lm/m | 24 VDC | ||
| IP protection | Colour temperature | |||
| 20 | 2700 K | |||
| Number of LEDs per ml | Dimensions (L x W x H) | |||
| 320 cob | 5000 x 8 x 2 mm | |||
| Dimmable | Yes | |||
24V DC LED power supply required / controller and remote control not supplied
Calculate your power supply:
The power in W of your power supply is proportional to the length in ml.
| Power | Output voltage | |
| 7.2W | 12V DC / 0.6 A | |
| Input voltage | IP protection | |
| 110/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 42 x 40 x 20 |
|
Dimensions may vary.
*Stable performance: no flickering after connection, good anti-interference. The casing is made of plastic to protect it from dust and moisture.
*Safety: no transformer noise, insulated end cover. The protective device is equipped with overload protection, overvoltage protection, short-circuit protection and overheating protection.
*Small and flat: with dimensions of 42 x 40 x 20 mm, it is small and can be easily installed in any room without compromising appearance. Inputs and outputs are clearly marked for easy electrical connection.
*Easy connection: simple connections via screw terminals allow easy replacement of existing transformers.
* Wide application: suitable for a variety of low voltage 12 V LED applications, including LED strip lights, doorbells, cabinet lights, LED displays.
| Power | Output voltage | |
| 24W | 12V DC / 2 A | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 88 x 46 x 35 |
|
Dimensions may vary.
| Power | Output voltage | |
| 60W | 12V DC / 5 A | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 120 x 60 x 35 |
|
Dimensions may vary.
| Power | Output voltage | |
| 5-7 W | 12-24V DC 250mA | |
| Input voltage | IP protection | |
| 220-240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| Yes TRIAC | (L x W x H): 85 x 35 x 23 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 36W | 12V DC / 3 A | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 99 x 43 x 31 |
|
Dimensions may vary.
Voltage: 220-240V AC
Maximum power: 150 W
IP protection: IP20
Width: 85 mm
Height: 80 mm
Material: PCB
| Power | Output voltage | |
| 6W | 12V DC / 1 A | |
| Input voltage | IP protection | |
| 100/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 60 x 35 x 23 |
|
| Power | Lumens | Voltage | Angle | Dimmable |
| 35.6W | 4000 | 230V | 300° | No |
| Power | Lumens | Voltage | Angle | Dimmable |
| 45W | 4500 | 230V | 300° | No |
The luminaire is sold without a bulb.
The Kathu Manyoya Rattan Pendant combines a unique, elegant design with high-quality finishes. This type of designer lamp lets you add that natural touch that will bring personality to any space, making it unique.
The luminaire is sold without a bulb.
The Koni Rattan Pendant combines a unique, elegant design with high-quality finishes. With this type of designer lamp, you can add a touch of colour and personality to any space, making it unique.
The luminaire is sold without a bulb.
The Pusaka Metal Pendant combines a unique, elegant design with high-quality finishes. This type of designer lamp lets you add that elegant touch that will bring personality to any space, making it unique.
| Power | Output voltage | |
| 40W | 25-42V DC / 1000mA | |
| Input voltage | IP protection | |
| 85/265V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 115 x 41 x 28 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current to light up the LED chips.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
CCT by colour temperature selection
| Power | Temperature | Lumens |
| 21W | 3000K / 4000K / 6000K | 2125 |
| Angle | Voltage | IP protection |
| 120° | 230V | 20 |
The Ivalo 20W Metal LED Pendant CCT is the perfect option for adding that extra touch to your space. Made from aluminium, this lamp has a modern, minimalist design. It has a light output of 85lm/W and an aperture angle of 120º. It is also equipped with a dimming system CCT, allowing you to choose the colour temperature between warm white, neutral white and cool white. With its elegant, modern, minimalist and sophisticated look, it becomes a design creation that will fit in perfectly with the style and room you are trying to decorate. You can place it in a wide range of spaces, such as dining rooms, kitchens, bedrooms, hotel corridors, shops, etc.
The Koiné 3 W metal LED wall light with switch features a modern design with a nickel-coloured finish. Made from high-quality steel, it incorporates a high-quality LED bulb and is ideal for bedside lighting or as a reading light in hotel rooms. Furthermore, it is fitted with a discreet switch, allowing you to control the light without having to install a wall switch.
CCT by colour temperature selection
| Power | Temperature | Lumens |
| 28W | 3000K / 4000K / 6000K | 3000 |
| Angle | Voltage | IP protection |
| 120° | 230V | 20 |
The Big Ivalo 28W Metal LED Pendant CCT is the perfect option for adding that extra touch to your space. Made from aluminium, this lamp has a modern, minimalist design. It has a light output of 85 lm/W and an aperture angle of 120º. It is also equipped with a dimming system CCT. With its elegant, modern, minimalist and sophisticated look, it is a design creation that will fit in perfectly with the style and room you are trying to decorate. You can place it in a wide range of spaces, including dining rooms, kitchens, bedrooms, hotel corridors, shops, etc.
| Power | Output voltage | |
| 40W | 28-40V DC / 1000 mA | |
| Input voltage | IP protection | |
| 180-264V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 119 x 42 x 28 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 60W | 28-42V DC / 1500 mA | |
| Input voltage | IP protection | |
| 200-240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 156 x 50 x 32 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
The luminaire is sold without an E27 bulb.
Last units in promotionAttention! product guaranteed 3 months, neither recovered nor exchanged.
| Power | Output voltage | |
| 4-7 * 1W | 12-26V DC / 240-260mA | |
| Input voltage | IP protection | |
| 85/265V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 65 x 35x 25 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 15-24 * 1W | 45-84V DC / 280-300 mA | |
| Input voltage | IP protection | |
| 85/265V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| Yes | (L x W x H): 87 x 37 x 22 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Voltage | Angle | Dimmable |
| 18W | 220-240 V | 170° | No |
| Temperature | Lumens | ||
| 3000K | 1350 | ||
| Dimensions (Ø x H) | Ø 142 x 26 |
| Dimmable | No |
| IP protection | 20 |
| Power | Voltage | Angle | Dimmable |
| 12W | 220-240 V | 170° | No |
| Temperature | Lumens | ||
| 6000K | 1200 | ||
| Dimensions (Ø x H) | Ø 129 x 25 |
| Dimmable | No |
| IP rating | 20 |
| Power | Output voltage | |
| 15-18 * 1W | 45-66V DC / 260mA | |
| Input voltage | IP protection | |
| 85/265V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 90 x 40 x 25 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Lumens | Voltage | Angle | Dimmable |
| 3W | 3 | 230V | 200° | No |
| Power | Output voltage | |
| 40-60w x 2W | 120-200V DC / 280mA | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 87 x 40 x 15 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Lumens | Voltage | Angle 120° |
|
| 33 W/m | 1340 Lm/m | 12 VDC | ||
| IP protection | Colour temperature | |||
| 20 | CCT (1800K to 6500K) | |||
| Number of LEDs per ml | Dimensions (L x W x H) | |||
| 120 | 5000 x 12 x 1.5 mm | |||
| Dimmable | Yes | |||
12V DC LED power supply required / controller and remote control not supplied
Calculate your power supply:
The power in W of your power supply is proportional to the length in ml.
| Power | Output voltage | |
| 3 * 1W | 6-11V DC / 280-300mA | |
| Input voltage | IP protection | |
| 85/265V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 55 x 30 x 25 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Voltage | Angle | Dimmable |
| 72W | 220-240 V | 170° | No |
| Temperature | Lumens | ||
| 3000-6000-4000K | 1200 | ||
| Dimensions (Ø x H) | Ø 305 x 30 |
| Dimmable | No |
| IP protection | 20 |
| Power | Lumens | Voltage | Angle | Dimmable |
| 120W "4000k | 4050 | 230V | 300° | Yes remote control |
| Power | Output voltage | |
| 18-24 * 1W | 54-85V DC / 240-260mA | |
| Input voltage | IP protection | |
| 85/265V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 90 x 40 x 25 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 3-4 * 1W | 9-13V DC / 280-300mA | |
| Input voltage | IP protection | |
| 85/265V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 55 x 30 x 25 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Lumens | Voltage | Angle | Dimmable |
| 45W | 1350 | 230V | 110° | Yes remote control |
| Power | Output voltage | |
| 6-7W | 9-13V DC / 240mA | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| Yes TRIAC | (L x W x H): 55 x 28 x 20 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 8-24w x2W | 24-96V DC / 240mA | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 70 x 35 x 15 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 18-25 * 1W | 60-90V DC / 300mA | |
| Input voltage | IP protection | |
| 85/265V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 80 x 37 x 23 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 10-18 * 3W | 30-60V DC / 600mA | |
| Input voltage | IP protection | |
| 85/277V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 115 x 45 x 29 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 8-24 * 1W | 12-72V DC / 240mA | |
| Input voltage | IP protection | |
| 175/265V | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 67 x 33 x 22mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED Driver transforms AC mains current into DC current to light up the LED chips.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 25.2W | 9-42V DC / 600 mA | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 98 x 40.5 x 25.5 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED Driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
| Power | Output voltage | |
| 35.7 W | 9-42V DC / 850 mA | |
| Input voltage | IP protection | |
| 220/240V 50/60Hz | 20 | |
| Dimmable: | Dimensions*: (mm) | |
| No | (L x W x H): 98 x 40.5 x 25.5 mm | |
Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.
An LED Driver transforms the mains alternating current into direct current so that the LED chips can be lit.
To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.
ATTENTION you must consult the driver's output voltage and current.
