Electrical accessories & LED drivers

• Dimensions:
• Height (mm): 80
• Width (mm) : 66
• Length (mm) : 45

Kanlux ROLF JQ is a microwave motion sensor. The maximum horizontal operating angle of the sensor is 360 degrees. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Kanlux ROLF JQ is a microwave motion sensor. The maximum horizontal operating angle of the sensor is 360 degrees. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

• Dimensions:
• Height (mm): 200
• Width (mm) : 112
• Length (mm): 112
• Number of modules: 4

DB series switching devices, which meet the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, solid walls made of non-combustible materials). They may not be used on flammable surfaces (e.g. plasterboard, wood, etc.), hollow walls or electrical conduits.

• Dimensions: Ø54.5 x 21.5 mm
• Voltage: 220/240V AC
• IP protection: 20

Kanlux DimGO is a dimmer suitable for LED light sources. It can be used to control the luminous flux of LED light sources. The prerequisite for using the Kanlux DimGO is a power supply suitable for the "trailing/leadership edge" control method.

Last units on special offer

Warning! product guaranteed 3 months, no refund or exchange.

• Dimensions:
• Height (mm): 220
• Width (mm) : 102
• Length (mm): 210
• Number of modules: 6

KDB series switchgear, which meets the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, solid walls made of non-combustible materials). They may not be used on flammable surfaces (e.g. plasterboard, wood, etc.), hollow walls or electrical conduits.

• Dimensions:
• Height (mm): 160
• Width (mm) : 65
• Length (mm): 160
• Number of modules: 8

DB series switching devices, which meet the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, solid walls made of non-combustible materials). They may not be used on flammable surfaces (e.g. plasterboard, wood, etc.), hollow walls or electrical conduits.

Kanlux MERGE JQ is a motion sensor with a maximum motion detection range of 5 m. The maximum horizontal operating angle of the sensor is 360 degrees. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Last units on sale

Attention! product guaranteed 3 months, neither recovered nor exchanged.

The Kanlux MERGE MW sensor offers an aesthetic and practical solution. It has a maximum motion detection range of 9 m. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Last units on sale

Attention! product guaranteed 3 months, neither recovered nor exchanged.

• Dimensions:
• Height (mm): 200
• Width (mm) : 95
• Length (mm): 147
• Number of modules: 6

DB series switching devices, which meet the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, solid walls made of non-combustible materials). They may not be used on flammable surfaces (e.g. plasterboard, wood, etc.), hollow walls or electrical conduits.

• Dimensions:
• Height (mm): 204
• Width (mm): 102
• Length (mm): 194
• Number of modules: 6

Series KDB switchgear, which meets the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, solid walls made of non-combustible materials). They may not be used on flammable surfaces (e.g. plasterboard, wood, etc.), hollow walls or electrical conduits.

• Dimensions:
• Height (mm): 130
• Width (mm) : 60
• Length (mm): 86
• Number of modules: 4

DB series switching devices, which meet the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, solid walls made of non-combustible materials). They may not be used on flammable surfaces (e.g. plasterboard, wood, etc.), hollow walls or electrical conduits.

Kanlux MERGE JQ is a motion sensor with a maximum motion detection range of 5 m. The maximum horizontal operating angle of the sensor is 360 degrees. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Kanlux MERGE ADJ is an infra-red motion detector which detects over a maximum range of 5m. It also detects 360°. The MERGE ADJ detector's settings are easily accessible and do not need to be dismantled.

Kanlux ROLF JQ is a microwave motion sensor. The maximum horizontal operating angle of the sensor is 360 degrees. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Kanlux ZONA JQ is a motion sensor with a maximum motion detection range of 10 m. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Kanlux ZONA JQ is a motion sensor with a maximum motion detection range of 10 m. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Kanlux ZONA FLAT is an infra-red motion detector which detects over a maximum range of 8m. It also detects 360°. On the ZONA FLAT, you can also adjust the time delay from 10s to 15min, and set the light detection threshold.

PRESENSOR is a range of microwave presence detectors. The range differs from standard HF detectors thanks to its 24GHz technology, which has a considerable effect on detection accuracy. As a result, the presence detector is able to detect any type of movement such as an individual moving about, or slight movements such as working on a computer, or a static presence such as someone watching television, making it easier to adjust the lighting to suit the situation.

PRESENSOR is a range of microwave presence detectors. The range differs from standard HF detectors thanks to its 24GHz technology, which has a considerable effect on detection accuracy. As a result, the presence detector is able to detect any type of movement such as an individual moving about, or slight movements such as working on a computer, or a static presence such as someone watching television, making it easier to adjust the lighting to suit the situation.

ZONA FLAT is an ultra-compact motion detector designed for discreet installation in modern spaces. Thanks to its compact design, it blends in perfectly with its surroundings without disrupting the aesthetics of the interior. It detects movement accurately within a radius of 8 metres and gives you total control over the parameters - setting the lighting duration (from 10 seconds to 15 minutes) and the light intensity threshold. It's the perfect solution for intelligent lighting control, combining minimalist design with maximum functionality.

• Kanlux CYBER is an adapter for electrical sockets with a digital timer. It can be used to programme the switching on and off of connected appliances at specific times.
• - equipped with a memory-keeping system
• - up to 10 on/off cycles can be programmed
• - the programmer works in daily and weekly modes