Electrical accessories & LED drivers

• Dimensions:
• Height (mm): 80
• Width (mm) : 66
• Length (mm) : 45

Kanlux ROLF JQ is a microwave motion sensor. The maximum horizontal operating angle of the sensor is 360 degrees. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

• Switches in the DB series, which meet the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, non-combustible walls). They must not be used on flammable surfaces (e.g. plasterboard, wood, etc.), on so-called ‘hollow’ walls or on electrical conduits.

• Dimensions: Ø54.5 x 21.5 mm
• Voltage: 220/240V AC
• IP protection: 20

Kanlux DimGO is a dimmer suitable for LED light sources. It can be used to control the luminous flux of LED light sources. The prerequisite for using the Kanlux DimGO is a power supply suitable for the "trailing/leadership edge" control method.

Last units on special offer

Warning! product guaranteed 3 months, no refund or exchange.

• Dimensions:
• Height (mm): 220
• Width (mm) : 102
• Length (mm): 210
• Number of modules: 6

KDB series switchgear, which meets the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, solid walls made of non-combustible materials). They may not be used on flammable surfaces (e.g. plasterboard, wood, etc.), hollow walls or electrical conduits.

This twilight sensor is compatible with luminaires fitted with 1-10V dimmable drivers. Its progressive operating mode increases and decreases the light from the luminaires in relation to the preset light level in the room (it has a dimmer that changes its intensity in relation to the ambient light). As a result, the Photoelectric Sensor / Mini Twilight 1-10V increases the intensity of the luminaires when the ambient light decreases and conversely, if the ambient light increases, the sensor reduces the intensity of the luminaires, thus ensuring that the lighting is always adequate and efficient.

This type of device allows you to maximise the efficiency of the lighting system, as you take advantage of the natural light available at all times. A very interesting option is to combine the Photoelectric Sensor / Mini Twilight 1-10V with a presence detector to fully automate the operation of the luminaire.

This product includes 70 cm of wiring and can be installed either flush-mounted or surface-mounted.

* Compatible with 1-10V dimmable drivers.

This 92x92x42mm Universal Surface-Mounted Box allows you to install flush-mounted switchgear without drilling holes in the wall.

Made from halogen-free polycarbonate (PC), this universal box is highly resistant and has pre-cut entrances for tubes, cables and trunking. Thanks to its dimensions, you can install standard-sized switchgear, so it's compatible with the majority of flush-mounted switchgear series on the market.

The 92x92x42 mm Universal Surface-mounted Box for Apparatus is generally used for indoor installations, normally exposed, of shielded tubes or trunking. A product that will certainly fulfil its purpose and allow you to add sockets or switches to any surface, for example.

* Fixing screws included.

A highly sensitive microwave sensor with adjustable settings (illumination duration, activation threshold and detection range).

• Dimensions:
• Height (mm): 160
• Width (mm) : 65
• Length (mm): 160
• Number of modules: 8

DB series switching devices, which meet the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, solid walls made of non-combustible materials). They may not be used on flammable surfaces (e.g. plasterboard, wood, etc.), hollow walls or electrical conduits.

The Double-Sided LED Emergency Lighting Sign is a practical and effective way of indicating exits, directions or the location of toilets, etc...

Fitted with a 3.6V 800mAh Ni-Cd battery with a life of up to 3 hours. The LED Emergency Signage Kit has an LED light bracket that offers great energy savings and excellent performance. The lighting on this LED Emergency Lighting Sign allows you to use both sides of the sign independently thanks to the LED light distribution of the design.

Its innovative design makes for easy installation, with 4 types of installation possible: hanging, recessed, wall-mounted in side mode and wall-mounted in front mode. You can choose the signage (exit, right orientation, left orientation, up orientation, down orientation and WC).

Without a doubt, theLED Emergency Lighting Sign we offer on our online lighting site is a key element of any emergency lighting system.

* Permanent lighting.

A dimmable LED bulb requires a carefully designed dimmer.

Connecting an LED bulb to a traditional dimmer often results in irregular operation, flickering light and a high risk of burning out the bulb.

Our button dimmer, on the other hand, has been designed for all types of bulb: traditional filament, energy-saving, dimmable and dimmable LED.

Designed and produced 100% in Italy, the LED dimmer with knob will allow you to regulate the intensity of light more comfortably and safely.

Download installation instructions (412.04k)

Kanlux MERGE JQ is a motion sensor with a maximum motion detection range of 5 m. The maximum horizontal operating angle of the sensor is 360 degrees. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Last units on sale

Attention! product guaranteed 3 months, neither recovered nor exchanged.

The Kanlux MERGE MW sensor offers an aesthetic and practical solution. It has a maximum motion detection range of 9 m. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Last units on sale

Attention! product guaranteed 3 months, neither recovered nor exchanged.

• Dimensions:
• Height (mm): 200
• Width (mm) : 95
• Length (mm): 147
• Number of modules: 6

DB series switching devices, which meet the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, solid walls made of non-combustible materials). They may not be used on flammable surfaces (e.g. plasterboard, wood, etc.), hollow walls or electrical conduits.

• Dimensions:
• Height (mm): 204
• Width (mm): 102
• Length (mm): 194
• Number of modules: 6

Series KDB switchgear, which meets the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, solid walls made of non-combustible materials). They may not be used on flammable surfaces (e.g. plasterboard, wood, etc.), hollow walls or electrical conduits.

A highly sensitive microwave sensor with adjustable settings (illumination duration, activation threshold and detection range).

Digital daily/weekly clock with LCD display ideal for swimming pool treatment plants, irrigation, etc.

Ready for DIN rail installation, it has a 230V AC power supply, 16 A / 250V AC switching capacity, maximum recommended load of 2000W, minimum interval of 1 minute and open contact (NO).

It supports up to 16 different programmes per day or week with a maximum of 18 steps per programme and pulses from 1 minute to 1 hour. It counts down from 100 minutes and has a 15-day reserve and a connection cable capacity of up to 2.5 mm².

Complies with international standards EN / IEC60730-1 and CE & RoHS certificates.

* Caution: When using for the first time, you must press the "RESET" button to switch the display on.

Non-replaceable lithium battery

A highly sensitive microwave sensor with adjustable settings (illumination duration, activation threshold and detection range).

• Dimensions (L x W x H): 127 x 75 x 35 mm

• Dimensions:
• Height (mm): 130
• Width (mm) : 60
• Length (mm): 86
• Number of modules: 4

DB series switching devices, which meet the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, solid walls made of non-combustible materials). They may not be used on flammable surfaces (e.g. plasterboard, wood, etc.), hollow walls or electrical conduits.

Kanlux ZONA FLAT is an infra-red motion detector which detects over a maximum range of 8m. It also detects 360°. On the ZONA FLAT, you can also adjust the time delay from 10s to 15min, and set the light detection threshold.

A highly sensitive microwave sensor with adjustable settings (illumination duration, activation threshold and detection range).

The Contactless Detection Switch for Cabinet Doors allows any light in a cabinet to be switched on without the need for a wall switch.

Features of the Contactless Detection Switch for Cabinet Doors

The Contactless Detection Switch for Cabinet Doors detects when the door is opened by switching on the light to which it is connected. This light will remain on until the sensor detects that the door is closed, at which point the light will be switched off. The sensor's angle of detection is 90°.

Applications of the Contactless Detection Switch for Cabinet Doors

The Contactless Detection Switch for Cabinet Doors is the perfect solution for illuminating your tool cabinets, wardrobes and kitchen cupboards, making it easier to see and select what you need.

PRESENSOR is a range of microwave presence detectors. The range stands out from standard HF detectors thanks to its 24GHz technology, which has a significant impact on detection accuracy. As a result, the presence detector is capable of detecting all types of movement, such as a person moving around, subtle movements such as working at a computer, or even static presence such as someone watching television, making it easier to adjust the lighting to suit the situation.

PRESENSOR is a range of microwave presence detectors. The range stands out from standard HF detectors thanks to its 24GHz technology, which has a significant impact on detection accuracy. As a result, the presence detector is capable of detecting all types of movement, such as a person moving around, subtle movements such as working at a computer, or even static presence such as someone watching television, making it easier to adjust the lighting to suit the situation.

ZONA FLAT is an ultra-compact motion detector designed for discreet installation in modern spaces. Thanks to its compact design, it blends in perfectly with its surroundings without disrupting the aesthetics of the interior. It detects movement accurately within a radius of 8 metres and gives you total control over the parameters - setting the lighting duration (from 10 seconds to 15 minutes) and the light intensity threshold. It's the perfect solution for intelligent lighting control, combining minimalist design with maximum functionality.

• Kanlux CYBER is an adapter for electrical sockets with a digital timer. It can be used to programme the switching on and off of connected appliances at specific times.
• - equipped with a memory-keeping system
• - up to 10 on/off cycles can be programmed
• - the programmer works in daily and weekly modes

A highly sensitive microwave sensor with adjustable settings (illumination duration, activation threshold and detection range).