Electrical accessories & LED drivers

• Dimensions:
• Height (mm): 80
• Width (mm) : 66
• Length (mm) : 45

Kanlux ROLF JQ is a microwave motion sensor. The maximum horizontal operating angle of the sensor is 360 degrees. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Kanlux ROLF JQ is a microwave motion sensor. The maximum horizontal operating angle of the sensor is 360 degrees. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms AC mains current into DC current to light up the LED chips.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

• Dimensions:
• Height (mm): 200
• Width (mm) : 112
• Length (mm): 112
• Number of modules: 4

DB series switching devices, which meet the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, solid walls made of non-combustible materials). They may not be used on flammable surfaces (e.g. plasterboard, wood, etc.), hollow walls or electrical conduits.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

The Kanlux ADI electronic power supply unit, with a maximum permissible case temperature of 75°C and current stabilisation of 350mA DC, is equipped with short-circuit and overload protection, as well as thermal protection that shuts down the power supply unit once the temperature exceeds 110°C.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

• Dimensions: Ø54.5 x 21.5 mm
• Voltage: 220/240V AC
• IP protection: 20

Kanlux DimGO is a dimmer suitable for LED light sources. It can be used to control the luminous flux of LED light sources. The prerequisite for using the Kanlux DimGO is a power supply suitable for the "trailing/leadership edge" control method.

Last units on special offer

Warning! product guaranteed 3 months, no refund or exchange.

Quick connector with 3 inputs and 3 outputs Up to 2.5 m², pack of 10, dla LM9055

• Wire Ø dimensions from 0.5 to 2.5 mm²

• Dimensions (L x W x H): 39 x 18 x 14 mm

  • Voltage: 24A / 250V max

  • IP20 protection

    • Connector: 3 wires rigid or flexible

  • Packaging: Box of 10

• Dimensions (Ø x H): Ø 107 x 35 mm
• IP protection: 20
• Includes: Battery + Screw and dowel kit
• In stock - From 12/11/2025 - Separately

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

• Dimensions:
• Height (mm): 220
• Width (mm) : 102
• Length (mm): 210
• Number of modules: 6

KDB series switchgear, which meets the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, solid walls made of non-combustible materials). They may not be used on flammable surfaces (e.g. plasterboard, wood, etc.), hollow walls or electrical conduits.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

This twilight sensor is compatible with luminaires fitted with 1-10V dimmable drivers. Its progressive operating mode increases and decreases the light from the luminaires in relation to the preset light level in the room (it has a dimmer that changes its intensity in relation to the ambient light). As a result, the Photoelectric Sensor / Mini Twilight 1-10V increases the intensity of the luminaires when the ambient light decreases and conversely, if the ambient light increases, the sensor reduces the intensity of the luminaires, thus ensuring that the lighting is always adequate and efficient.

This type of device allows you to maximise the efficiency of the lighting system, as you take advantage of the natural light available at all times. A very interesting option is to combine the Photoelectric Sensor / Mini Twilight 1-10V with a presence detector to fully automate the operation of the luminaire.

This product includes 70 cm of wiring and can be installed either flush-mounted or surface-mounted.

* Compatible with 1-10V dimmable drivers.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

This 92x92x42mm Universal Surface-Mounted Box allows you to install flush-mounted switchgear without drilling holes in the wall.

Made from halogen-free polycarbonate (PC), this universal box is highly resistant and has pre-cut entrances for tubes, cables and trunking. Thanks to its dimensions, you can install standard-sized switchgear, so it's compatible with the majority of flush-mounted switchgear series on the market.

The 92x92x42 mm Universal Surface-mounted Box for Apparatus is generally used for indoor installations, normally exposed, of shielded tubes or trunking. A product that will certainly fulfil its purpose and allow you to add sockets or switches to any surface, for example.

* Fixing screws included.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains AC current into DC so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

A highly sensitive microwave sensor with adjustable parameters (illumination time, activation threshold and detection distance).

Supply voltage: 220-240V AC 50/60Hz
Number of sockets: 4
Maximum load: 13A
Maximum power: 3000W
Overvoltage protection: 1500V
Protection level: IP20
Cable marking: H05VV-F, 3X1.5mm2, 0.2mm
Cable sheath material: PVC
Length: 5.0 [m]

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

• Dimensions:
• Height (mm): 160
• Width (mm) : 65
• Length (mm): 160
• Number of modules: 8

DB series switching devices, which meet the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, solid walls made of non-combustible materials). They may not be used on flammable surfaces (e.g. plasterboard, wood, etc.), hollow walls or electrical conduits.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms AC mains current into DC current to light up the LED chips.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

The Double-Sided LED Emergency Lighting Sign is a practical and effective way of indicating exits, directions or the location of toilets, etc...

Fitted with a 3.6V 800mAh Ni-Cd battery with a life of up to 3 hours. The LED Emergency Signage Kit has an LED light bracket that offers great energy savings and excellent performance. The lighting on this LED Emergency Lighting Sign allows you to use both sides of the sign independently thanks to the LED light distribution of the design.

Its innovative design makes for easy installation, with 4 types of installation possible: hanging, recessed, wall-mounted in side mode and wall-mounted in front mode. You can choose the signage (exit, right orientation, left orientation, up orientation, down orientation and WC).

Without a doubt, theLED Emergency Lighting Sign we offer on our online lighting site is a key element of any emergency lighting system.

* Permanent lighting.

A dimmable LED bulb requires a carefully designed dimmer.

Connecting an LED bulb to a traditional dimmer often results in irregular operation, flickering light and a high risk of burning out the bulb.

Our button dimmer, on the other hand, has been designed for all types of bulb: traditional filament, energy-saving, dimmable and dimmable LED.

Designed and produced 100% in Italy, the LED dimmer with knob will allow you to regulate the intensity of light more comfortably and safely.

Download installation instructions (412.04k)

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Kanlux MERGE JQ is a motion sensor with a maximum motion detection range of 5 m. The maximum horizontal operating angle of the sensor is 360 degrees. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Last units on sale

Attention! product guaranteed 3 months, neither recovered nor exchanged.

The Kanlux MERGE MW sensor offers an aesthetic and practical solution. It has a maximum motion detection range of 9 m. It is possible to set the lighting time and the level of light intensity at which the sensor operates.

Last units on sale

Attention! product guaranteed 3 months, neither recovered nor exchanged.

• Dimensions:
• Height (mm): 200
• Width (mm) : 95
• Length (mm): 147
• Number of modules: 6

DB series switching devices, which meet the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, solid walls made of non-combustible materials). They may not be used on flammable surfaces (e.g. plasterboard, wood, etc.), hollow walls or electrical conduits.

• Dimensions:
• Height (mm): 204
• Width (mm): 102
• Length (mm): 194
• Number of modules: 6

Series KDB switchgear, which meets the requirements for resistance to embers at 650°C, may only be used on non-combustible surfaces (e.g. solid, solid walls made of non-combustible materials). They may not be used on flammable surfaces (e.g. plasterboard, wood, etc.), hollow walls or electrical conduits.

• Voltage: 220-240V AC
• Maximum power: 150 W
• IP protection: IP20
• Width: 85 mm
• Height: 80 mm
• Material: PCB

A highly sensitive microwave sensor with adjustable parameters (illumination time, activation threshold and detection distance).

Supply voltage: 110-250 V AC 50/60 Hz
Maximum load: 10 A
Maximum power: 2,500 W
Overvoltage protection: 1,500 V
Number of 230 V sockets: 5
Protection level: IP22
Cable marking: H05VV-F, 3X1.0 mm2,
sheath 0.2 mm Cable material: PVC
Housing material: ABS
Length: 2.0 [m]:
Switch: Yes, for each socket separately

Digital daily/weekly clock with LCD display ideal for swimming pool treatment plants, irrigation, etc.

Ready for DIN rail installation, it has a 230V AC power supply, 16 A / 250V AC switching capacity, maximum recommended load of 2000W, minimum interval of 1 minute and open contact (NO).

It supports up to 16 different programmes per day or week with a maximum of 18 steps per programme and pulses from 1 minute to 1 hour. It counts down from 100 minutes and has a 15-day reserve and a connection cable capacity of up to 2.5 mm².

Complies with international standards EN / IEC60730-1 and CE & RoHS certificates.

* Caution: When using for the first time, you must press the "RESET" button to switch the display on.

Universal driver specially designed for Downlight, LED tiles and ceiling lights and other products that use a dimmable or non-dimmable LED driver.

An LED driver transforms the mains alternating current into direct current so that the LED chips can be lit.

To find out whether a driver will work with our luminaire, PCB or panel, you need to check the driver's output voltage and current.

ATTENTION you must consult the driver's output voltage and current.

Last units on promotion

Warning! product guaranteed 3 months, neither recovered nor exchanged.

Data sheet here (388.95k)